{"item_group_id":8748730941780,"aid":47355879031124,"name":"Albomed Forte Plus 1x 2.0 ml","brand":"ALBOMED GmbH","product_type":"Joint injections","shop_cat":"Albomed \u003e Bestselling Joint Injections \u003e Joint injections","tags":"16842698,ALBOMED GmbH,cat_Albomed,cat_Gelenkspritzen","mpnr":"104","desc":"KD Intra-Articular® GelKD Intra-Articular® Ultra One GelSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made of highly purified sodium hyaluronate obtained by bacterial fermentation without sodium hyaluronate obtained from genetic modifications with high molecular weight, which is used to improve serves the viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Depending on the product variant and concentration, 1 ml of aqueous, physiological phosphate buffer solution contains 10 mg, 16 mg, 22 mg, 25 mg or 30 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH value from 7.2 (6.8 – 7.4) in sufficient volume for injection. Fill volumes vary depending on the variant from 1 to 4.8 ml. The translation of the chemical components is listed in the table in English (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection purposesProperties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The KD Intra-Articular® Gel The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophilia or under useuse of anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided. Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. In the treated- affected joint, local symptoms such as pain, redness, warmth, and swelling may occur. These symptoms can be reduced if the treated area is cooled with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. In cases of intense If pain or inflammation occurs, treatment should be discontinued. Treatment of adverse reactions should only be carried out under the supervision of the attending physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor should be followed. Medical personnel should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor. Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and qua...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-forte-plus-albomed-gmbh-gelenkspritzen-stakonmed-555514.jpg?v=1772213811\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-forte-plus-1x-20-ml-albomed-gmbh-gelenkspritzen-stakonmed-1838200.jpg?v=1772274070\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-forte-plus-albomed-gmbh-gelenkspritzen-stakonmed-386736.jpg?v=1772213811\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/albomed-forte-plus-1-x-2-ml?variant=47355879031124\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":91.0,"price":71.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ALBOMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 44 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652411674964","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"16842698"}
{"item_group_id":8748731105620,"aid":47355879358804,"name":"Albomed Innoryos 1x 2.0 ml","brand":"ALBOMED GmbH","product_type":"Joint injections","shop_cat":"Albomed \u003e Bestselling Joint Injections \u003e Joint injections","tags":"18213280,ALBOMED GmbH,cat_Gelenkspritzen,cat_Innoryos","mpnr":"107","desc":"KD Intra-Articular® GelKD Intra-Articular® Ultra One GelSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made of highly purified sodium hyaluronate obtained by bacterial fermentation without sodium hyaluronate obtained from genetic modifications with high molecular weight, which is used to improve serves the viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Depending on the product variant and concentration, 1 ml of aqueous, physiological phosphate buffer solution contains 10 mg, 16 mg, 22 mg, 25 mg or 30 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH value from 7.2 (6.8 – 7.4) in sufficient volume for injection. Fill volumes vary depending on the variant from 1 to 4.8 ml. The translation of the chemical components is listed in the table in English (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection purposesProperties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The KD Intra-Articular® Gel The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophilia or under useuse of anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided. Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. In the treated- affected joint, local symptoms such as pain, redness, warmth, and swelling may occur. These symptoms can be reduced if the treated area is cooled with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. In cases of intense If pain or inflammation occurs, treatment should be discontinued. Treatment of adverse reactions should only be carried out under the supervision of the attending physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor should be followed. Medical personnel should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor. Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and qua...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-innoryos-albomed-gmbh-gelenkspritzen-stakonmed-473622.jpg?v=1772213397\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-innoryos-albomed-gmbh-gelenkspritzen-stakonmed-253404.jpg?v=1772213941\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-innoryos-albomed-gmbh-gelenkspritzen-stakonmed-913037.jpg?v=1772213941\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/albomed-innoryos-1-x-2-ml?variant=47355879358804\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":109.0,"price":74.9,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ALBOMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 44 mg \/ 2 ml  +  Niacinamid","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652411674964","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"18213280"}
{"item_group_id":8748729893204,"aid":47355873689940,"name":"Albomed mini 1x 1.0 ml","brand":"ALBOMED GmbH","product_type":"Joint injections","shop_cat":"Albomed \u003e Bestselling Joint Injections \u003e Joint injections","tags":"16842652,ALBOMED GmbH,cat_Albomed,cat_Gelenkspritzen","mpnr":"101","desc":"KD Intra-Articular® GelKD Intra-Articular® Ultra One GelSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made of highly purified sodium hyaluronate obtained by bacterial fermentation without sodium hyaluronate obtained from genetic modifications with high molecular weight, which is used to improve serves the viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Depending on the product variant and concentration, 1 ml of aqueous, physiological phosphate buffer solution contains 10 mg, 16 mg, 22 mg, 25 mg or 30 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH value from 7.2 (6.8 – 7.4) in sufficient volume for injection. Fill volumes vary depending on the variant from 1 to 4.8 ml. The translation of the chemical components is listed in the table in English (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection purposesProperties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The KD Intra-Articular® Gel The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophilia or under useuse of anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided. Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. In the treated- affected joint, local symptoms such as pain, redness, warmth, and swelling may occur. These symptoms can be reduced if the treated area is cooled with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. In cases of intense If pain or inflammation occurs, treatment should be discontinued. Treatment of adverse reactions should only be carried out under the supervision of the attending physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor should be followed. Medical personnel should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor. Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and qua...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-mini-albomed-gmbh-gelenkspritzen-stakonmed-795107.jpg?v=1772213474\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-mini-albomed-gmbh-gelenkspritzen-stakonmed-434573.jpg?v=1772213778\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-mini-albomed-gmbh-gelenkspritzen-stakonmed-533334.jpg?v=1772213778\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/albomed-mini-1-x-1-ml?variant=47355873689940\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":47.0,"price":25.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ALBOMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 10 mg \/ 1 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652411674964","meta_packungsgr_e":"1 Fertigspritze a 1 ml","meta_pzn":"16842652"}
{"item_group_id":8748731007316,"aid":47355879063892,"name":"Albomed One 1x 3.0 ml","brand":"ALBOMED GmbH","product_type":"Joint injections","shop_cat":"Albomed \u003e Bestselling Joint Injections \u003e Joint injections","tags":"16842706,ALBOMED GmbH,cat_Albomed,cat_Gelenkspritzen","mpnr":"105","desc":"KD Intra-Articular® GelKD Intra-Articular® Ultra One GelSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made of highly purified sodium hyaluronate obtained by bacterial fermentation without sodium hyaluronate obtained from genetic modifications with high molecular weight, which is used to improve serves the viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Depending on the product variant and concentration, 1 ml of aqueous, physiological phosphate buffer solution contains 10 mg, 16 mg, 22 mg, 25 mg or 30 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH value from 7.2 (6.8 – 7.4) in sufficient volume for injection. Fill volumes vary depending on the variant from 1 to 4.8 ml. The translation of the chemical components is listed in the table in English (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection purposesProperties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The KD Intra-Articular® Gel The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophilia or under useuse of anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided. Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. In the treated- affected joint, local symptoms such as pain, redness, warmth, and swelling may occur. These symptoms can be reduced if the treated area is cooled with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. In cases of intense If pain or inflammation occurs, treatment should be discontinued. Treatment of adverse reactions should only be carried out under the supervision of the attending physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor should be followed. Medical personnel should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor. Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and qua...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-one-albomed-gmbh-gelenkspritzen-stakonmed-351413.jpg?v=1772213495\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-one-albomed-gmbh-gelenkspritzen-stakonmed-697134.jpg?v=1772213832\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-one-albomed-gmbh-gelenkspritzen-stakonmed-672989.jpg?v=1772213832\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/albomed-one-1-x-3-ml?variant=47355879063892\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":177.0,"price":134.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"ALBOMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 75 mg \/ 3 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652411674964","meta_packungsgr_e":"1 Fertigspritze a 3 ml","meta_pzn":"16842706"}
{"item_group_id":8748729925972,"aid":47355873722708,"name":"Albomed Standard 1x 2.0 ml","brand":"ALBOMED GmbH","product_type":"Joint injections","shop_cat":"Albomed \u003e Bestselling Joint Injections \u003e Joint injections","tags":"16842675,ALBOMED GmbH,cat_Albomed,cat_Gelenkspritzen","mpnr":"102","desc":"KD Intra-Articular® GelKD Intra-Articular® Ultra One GelSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made of highly purified sodium hyaluronate obtained by bacterial fermentation without sodium hyaluronate obtained from genetic modifications with high molecular weight, which is used to improve serves the viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Depending on the product variant and concentration, 1 ml of aqueous, physiological phosphate buffer solution contains 10 mg, 16 mg, 22 mg, 25 mg or 30 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH value from 7.2 (6.8 – 7.4) in sufficient volume for injection. Fill volumes vary depending on the variant from 1 to 4.8 ml. The translation of the chemical components is listed in the table in English (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection purposesProperties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The KD Intra-Articular® Gel The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophilia or under useuse of anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided. Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. In the treated- affected joint, local symptoms such as pain, redness, warmth, and swelling may occur. These symptoms can be reduced if the treated area is cooled with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. In cases of intense If pain or inflammation occurs, treatment should be discontinued. Treatment of adverse reactions should only be carried out under the supervision of the attending physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor should be followed. Medical personnel should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor. Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and qua...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-standard-albomed-gmbh-gelenkspritzen-stakonmed-488852.jpg?v=1772213626\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-standard-albomed-gmbh-gelenkspritzen-stakonmed-530938.jpg?v=1772213626\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-standard-albomed-gmbh-gelenkspritzen-stakonmed-153350.jpg?v=1772213626\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/albomed-standard-1-x-2ml?variant=47355873722708\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":47.0,"price":29.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ALBOMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652411674964","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"16842675"}
{"item_group_id":8748729958740,"aid":47355873755476,"name":"Albomed Standard 50x 2.0 ml","brand":"ALBOMED GmbH","product_type":"Joint injections","shop_cat":"Albomed \u003e Bestselling Joint Injections \u003e Joint injections","tags":"ALBOMED GmbH,cat_Albomed,cat_Gelenkspritzen","mpnr":"103","desc":"KD Intra-Articular® GelKD Intra-Articular® Ultra One GelSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made of highly purified sodium hyaluronate obtained by bacterial fermentation without sodium hyaluronate obtained from genetic modifications with high molecular weight, which is used to improve serves the viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Depending on the product variant and concentration, 1 ml of aqueous, physiological phosphate buffer solution contains 10 mg, 16 mg, 22 mg, 25 mg or 30 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH value from 7.2 (6.8 – 7.4) in sufficient volume for injection. Fill volumes vary depending on the variant from 1 to 4.8 ml. The translation of the chemical components is listed in the table in English (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection purposesProperties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The KD Intra-Articular® Gel The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophilia or under useuse of anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided. Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. In the treated- affected joint, local symptoms such as pain, redness, warmth, and swelling may occur. These symptoms can be reduced if the treated area is cooled with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. In cases of intense If pain or inflammation occurs, treatment should be discontinued. Treatment of adverse reactions should only be carried out under the supervision of the attending physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor should be followed. Medical personnel should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor. Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and qua...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-standard-50x-20-ml-albomed-gmbh-gelenkspritzen-stakonmed-9575618.jpg?v=1772274020\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-standard-50x-20-ml-albomed-gmbh-gelenkspritzen-stakonmed-9715642.jpg?v=1772274020\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-standard-50x-20-ml-albomed-gmbh-gelenkspritzen-stakonmed-7270251.jpg?v=1772274021\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/albomed-standard-50-x-2-ml?variant=47355873755476\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":2350.0,"price":1247.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"ALBOMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652411674964","meta_packungsgr_e":"50 Fertigspritzen a 2 ml"}
{"item_group_id":8748731040084,"aid":47355879326036,"name":"Albomed Ultra One 1x 4.8 ml","brand":"ALBOMED GmbH","product_type":"Joint injections","shop_cat":"Albomed \u003e Bestselling Joint Injections \u003e Joint injections","tags":"16842712,cat_Albomed,cat_Gelenkspritzen","mpnr":"106","desc":"KD Intra-Articular® GelKD Intra-Articular® Ultra One GelSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made of highly purified sodium hyaluronate obtained by bacterial fermentation without sodium hyaluronate obtained from genetic modifications with high molecular weight, which is used to improve serves the viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Depending on the product variant and concentration, 1 ml of aqueous, physiological phosphate buffer solution contains 10 mg, 16 mg, 22 mg, 25 mg or 30 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH value from 7.2 (6.8 – 7.4) in sufficient volume for injection. Fill volumes vary depending on the variant from 1 to 4.8 ml. The translation of the chemical components is listed in the table in English (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection purposesProperties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The KD Intra-Articular® Gel The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophilia or under useuse of anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided. Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. In the treated- affected joint, local symptoms such as pain, redness, warmth, and swelling may occur. These symptoms can be reduced if the treated area is cooled with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. In cases of intense If pain or inflammation occurs, treatment should be discontinued. Treatment of adverse reactions should only be carried out under the supervision of the attending physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor should be followed. Medical personnel should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor. Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and qua...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-ultra-one-albomed-gmbh-gelenkspritzen-stakonmed-374730.jpg?v=1772213914\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-ultra-one-albomed-gmbh-gelenkspritzen-stakonmed-661418.jpg?v=1772213914\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/albomed-ultra-one-albomed-gmbh-gelenkspritzen-stakonmed-196893.jpg?v=1772213914\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/albomed-ultra-one-1-x-4-8-ml?variant=47355879326036\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":203.0,"price":149.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"ALBOMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 120 mg \/ 4,8 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652411674964","meta_packungsgr_e":"1 Fertigspritze a 4,8 ml","meta_pzn":"16842712"}
{"item_group_id":8748732318036,"aid":47355881587028,"name":"Belotero Balance Lidocaine 1x 1.0 ml","brand":"Merz Consumer Care GmbH","product_type":"Filler","shop_cat":"Belotero \u003e Bestseller Filler \u003e Dermafiller","tags":"cat_Belotero,cat_Filler,Merz Consumer Care GmbH","mpnr":"208","desc":"Belotero® Balance LidocaineBelotero® Balance Lidocaine is a hyaluronic acid dermal filler for the treatment of moderate wrinkles and early age-related lines. The product is especially suitable for the gentle correction of nasolabial folds, forehead wrinkles, and frown lines. Additionally, Belotero® Balance Lidocaine can be used for subtle lip definition.Its even tissue integration creates a smooth transition between treated and untreated areas, supporting a natural and harmonious appearance. The addition of lidocaine allows for a comfortable and largely painless injection.Treatment AreasModerate fine lines and wrinklesEarly forehead wrinklesNasolabial folds and fine lip linesProduct FeaturesGentle wrinkle correction with smooth transitions for a natural resultGood viscosity for optimal integration into surrounding tissueMulti-crosslinked, monophasic hyaluronic acidComfortable application thanks to included lidocaineBelotero® Product LineThe Belotero® hyaluronic fillers were developed for individually tailored treatment plans that preserve the natural facial expression. The product family includes dermal fillers with different hyaluronic acid concentrations for various treatment goals and facial areas. The patented CPM® technology (Cohesive Polydensified Matrix) supports optimal integration of the hyaluronic gel into the tissue and contributes to a natural feel and appearance.GPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Anteis SAAddress: 18 Chemin de Aulx, 1228 Plan-les-Ouates, SwitzerlandE-mail: reception@merz.comWebsite: https:\/\/www.anteis.com\/en\/legal-statement\/European manufacturer: NoResponsible PersonName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressumImporter InformationName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressum","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-balance-lidocaine-merz-consumer-care-gmbh-filler-stakonmed-675861.jpg?v=1772214049\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-balance-lidocaine-merz-consumer-care-gmbh-filler-stakonmed-973373.jpg?v=1772214049\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-balance-lidocaine-merz-consumer-care-gmbh-filler-stakonmed-238045.jpg?v=1772214049\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/belotero-balance-lidocaine-1-x-1-0-ml?variant=47355881587028\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":129.0,"price":81.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Merz Consumer Care GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":8748732481876,"aid":47355882045780,"name":"Belotero Intense Lidocaine 1x 1.0 ml","brand":"Merz Consumer Care GmbH","product_type":"Filler","shop_cat":"Belotero \u003e Bestseller Filler \u003e Dermafiller","tags":"cat_Belotero,cat_Filler,Merz Consumer Care GmbH","mpnr":"210","desc":"Belotero® Intense LidocaineBelotero® Intense Lidocaine is a hyaluronic acid dermal filler for the treatment of pronounced, deep facial wrinkles. The product is especially suitable for correcting deep nasolabial and marionette lines and can also be used for targeted volume enhancement, including the lips.Thanks to its uniform tissue integration, Belotero® Intense Lidocaine allows a smooth transition between treated and untreated areas, supporting a natural-looking result. The addition of lidocaine ensures a comfortable and largely painless injection.Treatment AreasDeep facial wrinkles, e.g., nasolabial foldsMarionette linesVolume enhancementProduct FeaturesHigh hyaluronic acid concentration with pronounced water-binding for strong lifting effectCPM® technology (Cohesive Polydensified Matrix) for uniform tissue integration, high stability, and long-lasting effectMulti-crosslinked hyaluronic acid with 25.5 mg\/mlComfortable, largely painless application thanks to included lidocaineBelotero® Product LineThe Belotero® hyaluronic fillers were developed for individually tailored treatment plans that preserve the natural facial expression. The product family includes dermal fillers with different hyaluronic acid concentrations for various treatment goals and facial areas. The patented CPM® technology (Cohesive Polydensified Matrix) supports optimal integration of the hyaluronic gel into the tissue and contributes to a natural feel and appearance.GPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Anteis SAAddress: 18 Chemin de Aulx, 1228 Plan-les-Ouates, SwitzerlandE-mail: reception@merz.comWebsite: https:\/\/www.anteis.com\/en\/legal-statement\/European manufacturer: NoResponsible PersonName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressumImporter InformationName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressum","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-intense-lidocaine-merz-consumer-care-gmbh-filler-stakonmed-266132.jpg?v=1771098783\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-intense-lidocaine-merz-consumer-care-gmbh-filler-stakonmed-482896.jpg?v=1771098783\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-intense-lidocaine-merz-consumer-care-gmbh-filler-stakonmed-103233.jpg?v=1771098783\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/belotero-intense-lidocaine-1-x-1-0-ml?variant=47355882045780\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":139.0,"price":85.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Merz Consumer Care GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":11997502636372,"aid":51849589850452,"name":"Belotero Lips Contour 1x 0.6 ml","brand":"Merz Consumer Care GmbH","product_type":"Filler","shop_cat":"Belotero \u003e Bestseller Filler \u003e Dermafiller","tags":"cat_Belotero,cat_Filler,Merz Consumer Care GmbH","mpnr":"211","desc":"Belotero® Lips Contour LidocaineBelotero® Lips Contour Lidocaine is a hyaluronic acid dermal filler for precise definition and restoration of the lip contour. The product is specially tailored to the needs of the sensitive lip area and is suitable for targeted correction of sunken, thin, or asymmetrical lip contours.The contained cross-linked hyaluronic acid enables immediately visible contouring with a natural result. The addition of lidocaine supports a comfortable and largely painless injection. In combination with the partner product Belotero® Lips Shape Lidocaine, targeted volume enhancement of the lips can also be achieved.Treatment AreasHarmonious and balanced lip contourDefined lip curvesImprovement of lip shapeProduct FeaturesHigh hyaluronic acid concentration with pronounced water-binding for effective contour definitionCPM® technology (Cohesive Polydensified Matrix) for uniform tissue integration, good stability, and long-lasting effectMulti-cross-linked hyaluronic acid with 22.5 mg\/mlContains 0.3% lidocaine for a comfortable, largely painless applicationBelotero® Product LineThe Belotero® hyaluronic fillers were developed for individually tailored treatment plans that preserve the natural facial expression. The product family includes various dermal fillers with different hyaluronic acid concentrations for specific facial areas and treatment goals. The patented CPM® technology ensures optimal gel integration into the tissue and supports a natural feel as well as a harmonious appearance.GPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Anteis SAAddress: 18 Chemin de Aulx, 1228 Plan-les-Ouates, SwitzerlandE-Mail: reception@merz.comWebsite: https:\/\/www.anteis.com\/en\/legal-statement\/European manufacturer: NoResponsible PersonName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-Mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressumImporter InformationName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-Mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressum","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-lips-contour-1x-06-ml-mhd-280226-merz-consumer-care-gmbh-filler-stakonmed-3791039.jpg?v=1772274022\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-lips-contour-1x-06-ml-mhd-280226-merz-consumer-care-gmbh-filler-stakonmed-2575155.jpg?v=1772274022\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-lips-contour-1x-06-ml-mhd-280226-merz-consumer-care-gmbh-filler-stakonmed-1855487.jpg?v=1772274023\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/belotero-lips-contour?variant=51849589850452\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":119.0,"price":77.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Merz Consumer Care GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 0,6 ml"}
{"item_group_id":11997517807956,"aid":51849621274964,"name":"Belotero Lips Shape 1x 0.6 ml","brand":"Merz Consumer Care GmbH","product_type":"Filler","shop_cat":"Belotero \u003e Bestseller Filler \u003e Dermafiller","tags":"cat_Belotero,cat_Filler,Merz Consumer Care GmbH","mpnr":"212","desc":"Belotero® Lips Shape LidocaineBelotero® Lips Shape Lidocaine is a hyaluronic acid dermal filler designed for targeted shaping and volume enhancement of the lips. The product is suitable for restoring lost lip volume as well as correcting thin, asymmetrical, or downward-turned corners of the mouth.The filler is based on cross-linked hyaluronic acid and is specially formulated for lip treatment. The addition of lidocaine allows for a comfortable and largely painless injection. Belotero® Lips Shape Lidocaine can be used in both the upper and lower lips and supports a long-lasting, natural-looking result.Treatment AreasHarmonious and balanced lip appearanceDefined lip contoursLip volume enhancementProduct FeaturesHigh hyaluronic acid concentration with pronounced water-binding for effective volume enhancementCPM® technology (Cohesive Polydensified Matrix) for uniform tissue integration, high stability, and long durabilityMulti-cross-linked hyaluronic acid with 25.5 mg\/mlContains 0.3% lidocaine for a comfortable, largely painless applicationBelotero® Product LineThe Belotero® hyaluronic fillers were developed for individually tailored treatment plans that preserve the natural facial expression. The product family includes dermal fillers with different hyaluronic acid concentrations for various treatment goals and facial areas. The patented CPM® technology (Cohesive Polydensified Matrix) supports optimal integration of the hyaluronic gel into the tissue and ensures a natural feel and appearance.GPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Anteis SAAddress: 18 Chemin de Aulx, 1228 Plan-les-Ouates, SwitzerlandE-Mail: reception@merz.comWebsite: https:\/\/www.anteis.com\/en\/legal-statement\/European manufacturer: NoResponsible PersonName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-Mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressumImporter InformationName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-Mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressum","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-lips-shape-1x-06-ml-mhd-280226-merz-consumer-care-gmbh-filler-stakonmed-5936820.jpg?v=1772274012\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-lips-shape-1x-06-ml-mhd-280226-merz-consumer-care-gmbh-filler-stakonmed-4507004.jpg?v=1772274013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-lips-shape-1x-06-ml-mhd-280226-merz-consumer-care-gmbh-filler-stakonmed-7960427.jpg?v=1772274013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/belotero-lips-shape?variant=51849621274964\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":119.0,"price":77.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Merz Consumer Care GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 0,6 ml"}
{"item_group_id":11997519774036,"aid":51849628647764,"name":"Belotero Volume Lidocaine 2x 1.0 ml","brand":"Merz Consumer Care GmbH","product_type":"Filler","shop_cat":"Belotero \u003e Bestseller Filler \u003e Dermafiller","tags":"cat_Belotero,cat_Filler,Merz Consumer Care GmbH","mpnr":"216","desc":"Belotero® Volume LidocaineBelotero® Volume Lidocaine is a hyaluronic acid dermal filler designed for pronounced volume enhancement in central facial areas. The product is especially suitable for volume restoration and shaping in the cheek, chin, and temple areas and can also be used to correct deep wrinkles.The injectable hyaluronic acid gel is based on the advanced CPM® technology, which combines differently cross-linked hyaluronic acid in a homogeneous matrix. This gives the filler high stability, good injectability, and excellent tolerability. The special manufacturing process supports long-lasting results.Treatment AreasChin areaCheek areaTemplesProduct FeaturesVery high hyaluronic acid concentration for pronounced lifting power and effective volume enhancementCPM® technology (Cohesive Polydensified Matrix) for high stability, uniform tissue integration, and long-lasting effectsMulti-cross-linked hyaluronic acid with 26 mg\/mlGood injectability and high tolerabilityBelotero® Product LineThe Belotero® hyaluronic fillers were developed for individually tailored treatment plans that preserve the natural facial expressions. The product family includes dermal fillers with different hyaluronic acid concentrations for various treatment goals and facial regions. The patented CPM® technology supports optimal integration of the hyaluronic gel into the tissue and contributes to a natural feel and appearance.GPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Anteis SAAddress: 18 Chemin de Aulx, 1228 Plan-les-Ouates, SwitzerlandE-Mail: reception@merz.comWebsite: https:\/\/www.anteis.com\/en\/legal-statement\/European manufacturer: NoResponsible PersonName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-Mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressumImporter InformationName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-Mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressum","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-volume-lidocaine-2x-10-ml-merz-consumer-care-gmbh-filler-stakonmed-4298503.jpg?v=1772274014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-volume-lidocaine-2x-10-ml-merz-consumer-care-gmbh-filler-stakonmed-7533075.jpg?v=1772274013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/belotero-volume-lidocaine-2x-10-ml-merz-consumer-care-gmbh-filler-stakonmed-5426061.jpg?v=1772274013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/belotero-volume-lidocaine?variant=51849628647764\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":299.0,"price":179.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Merz Consumer Care GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 Fertigspritze a 1 ml"}
{"item_group_id":8748731531604,"aid":47355879784788,"name":"Cingal 1x 4.0 ml","brand":"Plasmaconcept AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Cingal \u003e Joint injections","tags":"12393996,cat_Cingal,cat_Gelenkspritzen,Plasmaconcept AG","mpnr":"108","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/cingal-plasmaconcept-ag-gelenkspritzen-stakonmed-534019.jpg?v=1772214296\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/cingal-plasmaconcept-ag-gelenkspritzen-stakonmed-906808.jpg?v=1772214296\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/cingal-plasmaconcept-ag-gelenkspritzen-stakonmed-415634.jpg?v=1772214296\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/cingal-1-x-4-ml?variant=47355879784788\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":279.0,"price":159.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Plasmaconcept AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 88 mg und 18 mg Triamcinolonhexacetonid \/ 4 ml","meta_packungsgr_e":"1 Fertigspritze a 4 ml","meta_pzn":"12393996"}
{"item_group_id":11997435396436,"aid":51849339273556,"name":"Curavisc 1x 2.0 ml","brand":"Curasan AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Curavisc \u003e Joint injections","tags":"cat_curavisc,cat_Gelenkspritzen,Curasan AG","mpnr":"109","desc":"Curavisc®Sodium hyaluronate E.P.1.0% viscoelastic solutionSterile solution for intra-articular injectionComposition:1 prefilled syringe with 2 ml (Curavisc®) injection solution contains: 20 mg (Curavisc®) sodium hyaluronate (obtained by fermentation) as well as sodium chloride, sodium monohydrogen phosphate, sodium dihydrogen phosphate, and water for injection.Indications:Pain and functional impairment in degenerative and traumatic damage of synovial joints.Curavisc® can be used in large joints such as knee, hip, and shoulder joints, as well as in small joints such as facet joints of the spine, thumb saddle joint, interphalangeal joints of fingers and toes, big toe metatarsophalangeal joint, and temporomandibular joint.Contraindications and precautions:Patients with confirmed hypersensitivity to components of the injection solution must not be given the product.Special caution is required in patients with confirmed hypersensitivity to medications.Curavisc® contains as an active ingredient highly pure sodium hyaluronate obtained by fermentation. In rare individual cases, allergic reactions to neutral protein fractions cannot be excluded.The general precautions for intra-articular injections must be observed. Curavisc® must be injected precisely into the joint cavity. Injections into blood vessels and surrounding tissue must be avoided.Since no clinical experience is available for the use of hyaluronate in children, during pregnancy and breastfeeding, or in inflammatory joint diseases such as rheumatoid arthritis or ankylosing spondylitis, treatment with Curavisc® is not recommended in these cases.If joint effusion is present, it is recommended to reduce it by aspiration, rest, and application of an ice pack. Corticosteroid injections may also be considered if necessary. Treatment with Curavisc® can be started two to three days later.Side effects:Local symptoms such as pain, warmth, skin redness (flush), and swelling may occur in a joint treated with Curavisc®. Applying an ice pack to the treated joint for five to ten minutes reduces the occurrence of these symptoms.Interactions with other products:Currently, there is no information on interactions and incompatibilities of Curavisc® with other solutions for intra-articular use.Concomitant administration of an oral analgesic or anti-inflammatory drug during the first days of treatment may further improve symptoms.Dosage and administration:Curavisc® is injected once weekly into the affected joint, at least three and at most five times. Multiple joints can be treated simultaneously. Depending on the severity of joint damage, the beneficial effect of a treatment cycle of five intra-articular injections can last for months. The efficacy of a single treatment cycle of fewer than three injections has not been proven. Repeat treatments can be administered as needed at intervals of no less than six months.Remove the prefilled syringe from the blister pack. Remove the cap and immediately attach a needle appropriate for the size of the joint (e.g., 19 or 21 G). Remove any air bubbles from the syringe before injection.Please note:The injection solution in the syringe is sterile. For protection during storage and transport, the prefilled syringe is packed in a blister pack and a carton. The outer surface of the prefilled syringe is clean but not sterile.If the prefilled syringe or blister pack is damaged, the syringe must not be used.Aseptic technique must be strictly observed during administration.Properties and mode of action:The hyaluronate responsible for the viscoelasticity of joint fluid (synovial fluid) is present in the synovial fluid of all joints, especially in large weight-bearing joints, where the synovial fluid ensures normal pain-free movement through its lubricating and shock-absorbing properties. Additionally, the synovial fluid is responsible for the nutrient supply of the cartilage.In degenerative joint disorders, e.g., osteoarthritis, the viscoelasticity of the synovial...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/curavisc-1x-20-ml-curasan-ag-gelenkspritzen-stakonmed-9774421.jpg?v=1772274023\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/curavisc-1x-20-ml-curasan-ag-gelenkspritzen-stakonmed-4020936.jpg?v=1772274021\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/curavisc-1x-20-ml-curasan-ag-gelenkspritzen-stakonmed-3709232.jpg?v=1772274022\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/curavisc?variant=51849339273556\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":34.95,"price":15.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Curasan AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57234636046676","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"01442295"}
{"item_group_id":8748731138388,"aid":47355879391572,"name":"Durolane 1x 3.0 ml","brand":"Bioventus Coöperatief U.A.","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Durolane \u003e Joint injections","tags":"2458832,Bioventus Coöperatief U.A.,cat_Durolane,cat_Gelenkspritzen","mpnr":"110","desc":"Composition1 ml contains:Stabilized hyaluronic acid 20 mg Isotonic saline solution, pH 7 q.s.DescriptionDUROLANE* is intended for intra-articular injection for the symptomatic treatment of mild to moderate knee and hip osteoarthritis. Additionally, DUROLANE is intended for intra-articular injection for the symptomatic treatment of mild to moderate osteoarthritis of indicated synovial joints as well as pain following arthroscopic procedures. It must be injected by a licensed physician or according to local regulations.DUROLANE contains 20 mg\/ml stabilized non-animal hyaluronic acid in buffered isotonic saline solution with a pH of 7. DUROLANE is a sterile, transparent viscoelastic gel supplied in a 3-ml glass syringe. The product is intended for single use only.Hyaluronic acid is identical in all living organisms. It is a natural polysaccharide found in all body tissues, with particularly high Concentrations in synovial fluid and skin. DUROLANE consists of biosynthetically produced hyaluronic acid that has been purified and stabilized. DUROLANE is broken down in the body by the same metabolic processes as endogenous hyaluronic acid.Mode of actionThe body's hyaluronic acid is a natural component of synovial fluid and serves in the joints both as a lubricant for cartilage and tendons and as a shock absorber. Hyaluronic acid injections into the joint to restore viscosity and elasticity can simultaneously relieve pain and improve joint mobility.DosageDUROLANE is a Single-dose preparation in a single-use syringe and may only be injected once per treatment series. The recommended dose is 3 ml per knee, hip, or shoulder joint. The recommended dose is 1–2 ml for compound joints (e.g., elbow or ankle) and about 1 ml for small synovial joints (e.g., thumb).IndicationsSymptomatic treatment of mild to moderate knee and hip osteoarthritis. DUROLANE is also approved for the symptomatic treatment of mild to moderate osteoarthritis pain in ankle, shoulder, elbow, hand, finger, and toe joints. DUROLANE is also indicated for the treatment of pain following arthroscopic procedures on the joint in the presence of osteoarthritis within three months after the procedure.ContraindicationsNone known.Warnings• DUROLANE must not be used in infected or severely inflamed Synovial joint must not be injected.• DUROLANE must not be injected in case of active skin disease or infection at or near the injection site.• DUROLANE must not be injected intravascularly or extra-articularly or injected into the synovial tissue or joint capsule will be.• DUROLANE must not be re-sterilized, as the product may be damaged. The product may be damaged as a result.Precautions• DUROLANE should be used with special caution in patients with venous or lymphatic congestion in the leg.• The use of DUROLANE in pregnant or breastfeeding women or in children has not yet been studied.• A separate DUROLANE syringe must be used for each joint to be treated.• As with all invasive joint treatments, there is a small risk of infection.• DUROLANE must not be used in patients with known hypersensitivity to the product. Patients must not be injected with products based on hyaluronic acid if they have known hypersensitivity.• Local anesthetics must not be used in patients with known allergy or hypersensitivity to local anesthetics.• Injections under fluoroscopic guidance and under Use of a contrast agent is not allowed in known Allergy or hypersensitivity of the patient to should not be performed with the contrast agent.• Repeat injections into the knee at intervals shorter than 6 months after the initial injection have not yet been studied in clinical trials.• Increasing injection pressure may indicate that the needle is incorrectly positioned outside the joint or that the joint is overfilled.• The efficacy of DUROLANE after arthroscopic procedures performed solely for diagnostic or investigative purposes or in the absence of joint osteoarthritis has not been established.• DUROLANE should be...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/durolane-1x-30-ml-bioventus-cooperatief-ua-gelenkspritzen-stakonmed-7595272.jpg?v=1772274016\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/durolane-bioventus-cooperatief-ua-gelenkspritzen-stakonmed-679493.jpg?v=1772214386\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/durolane-bioventus-cooperatief-ua-gelenkspritzen-stakonmed-485314.jpg?v=1772214386\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/durolane-1-x-3-ml?variant=47355879391572\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":380.0,"price":118.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Bioventus Coöperatief U.A.","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 60 mg \/ 3 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674228384084","meta_packungsgr_e":"1 Fertigspritze a 3 ml","meta_pzn":"2458832"}
{"item_group_id":12399057338708,"aid":53070037057876,"name":"Flamex (120 capsules)","brand":"ReviMed GmbH","product_type":"Supplements","shop_cat":"Supplements","tags":"cat_Supplements","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/REV_FLAMEX_matt.jpg?v=1770831837\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/flamex-120-kapseln-revimed-gmbh-supplements-stakonmed-6302770.jpg?v=1770865390\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/flamex-126g-120kapseln?variant=53070037057876\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":37.9,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ReviMed GmbH","meta_darreichungsform":"Nahrungsergänzungsmittel","meta_detail":"Mit MSM, Weihrauch- und Teufelskrallenextrakt und Vitamin E","meta_packungsgr_e":"120 Kapseln \/ 126g"}
{"item_group_id":8748731171156,"aid":47355879424340,"name":"Go-On 1x 2.5 ml","brand":"Viatris Healthcare GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Go-On \u003e Joint injections","tags":"1328464,cat_Gelenkspritzen,cat_Go On,Viatris Healthcare GmbH","mpnr":"111","desc":"DESCRIPTION:GO-ON® is a sterile, pyrogen-free sodium hyaluronate solution.COMPOSITION: 1 GO-ON® prefilled syringe contains 2.5 ml of a 1% sodium hyaluronate solution as well as sodium chloride, sodium monohydrogen phosphate, sodium dihydrogen phosphate, and water for injection purposes.PROPERTIES: Sodium hyaluronate is a natural, high-molecular-weight polysaccharide composed of a linear chain of disaccharide units made up of sodium glucuronate and N-acetylglucosamine. Sodium hyaluronate is present in many tissues of the human body and is the main component of synovial fluid, where it occurs in high concentrations. It plays an important role as a joint lubricant in coordinating the physical and mechanical interactions between adjacent tissues. As a viscoelastic support material, it also maintains the spacing between tissues. Sodium hyaluronate preparations can have different molecular weights but share the same chemical structure. GO-ON® is a 1% sodium hyaluronate solution obtained from Streptococcus equi through fermentation processes and subsequent purification.INDICATIONS: GO-ON is indicated as a viscoelastic supplementation of the synovial fluid in the knee. Viscosupplementation is recommended for patients with normal weight or moderate overweight with symptomatic mild to moderate knee OA whose condition cannot be sufficiently improved by non-pharmacological treatment and analgesics\/NSAIDs or who cannot take analgesics\/NSAIDs. The product acts as a lubricant and mechanical support and is suitable for treating symptomsof osteoarthritis.CONTRAINDICATIONS: GO-ON® must not be used in patients with a history of hypersensitivity to any of the product's components or in inflammatory joint diseases such as rheumatoid arthritis or ankylosing spondylitis. Since the safety of this product has not been established in children, pregnant, or breastfeeding women, it must not be used in these patients. Recognized contraindications for intra-articular hyaluronic acid injection include active joint infections, bacteremia, and diseases of the overlying skin. WARNINGS AND PRECAUTIONS: This product may only be used by doctors. In particular, the doctor should have training as an orthopedist, rheumatologist, or physiatrist. | Recommendations regarding injection techniques: - Ensure that the joint shows no clinical signs of acute inflammation (heat, redness, swelling) before injection of GO-ON®; | - If necessary, removal of excess synovial fluid (due to joint effusion) before injection; | - Use of aseptic technique to avoid contamination and infection at the injection site. Do not use if the blister packaging has been opened and\/or damaged. The product must not be used after the expiration date indicated on the box. The product should be kept out of reach of children. In patients with osteoarthritis, this preparation may worsen an existing local inflammation. Therefore, it is advisable to administer the product only after the local symptom has been alleviated.In rare cases, local pain may occur after administration of the product.To avoid pain after the injection, instructions should be given,keeping the site as still as possible for 2-6 hours after the injection.The product must be injected strictly into the intra-articular area, as otherwise it may cause pain. Avoid injections into blood vessels or surrounding tissue! The preparation should be administered with caution to patients who have frequently shown hypersensitivity to medications, and the patient should remain under clinical observation for at least 1 hour after the injection.SIDE EFFECTS: In rare cases, some patients develop a skin rash, such as urticaria and pruritus. In such cases, administration should be discontinued and the patient treated accordingly. Pain (mainly transient pain after administration), swelling and effusions, as well as infections at the injection site, have been reported only rarely. Patients rarely complain of redness, warmth, and a feeling of heaviness at th...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/go-on-viatris-healthcare-gmbh-gelenkspritzen-stakonmed-987449.jpg?v=1772214420\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/go-on-viatris-healthcare-gmbh-gelenkspritzen-stakonmed-578810.jpg?v=1772214420\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/go-on-viatris-healthcare-gmbh-gelenkspritzen-stakonmed-833437.jpg?v=1772214420\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/go-on-1-x-2-5-ml?variant=47355879424340\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":35.01,"price":22.1,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Viatris Healthcare GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 25 mg \/ 2,5 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674266034516","meta_packungsgr_e":"1 Fertigspritze a 2.5 ml","meta_pzn":"1328464"}
{"item_group_id":8748731236692,"aid":47355879489876,"name":"Hialurom Forte 1x 2.0 ml","brand":"actrevo GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hialurom \u003e Joint injections","tags":"18739059,actrevo GmbH,cat_Gelenkspritzen,cat_Hialurom","mpnr":"113","desc":"HIALUROMSodium hyaluronate 30 mg 2 ml, sterile solution for injection in a prefilled syringeFor intraarticular injectionDESCRIPTION:Hialurom is a sterile, viscoelastic solution of sodium hyaluronate. Hialurom contains 30 mg in 2 ml of sterile sodium hyaluronate with a molecular weight of 1.5 - 2.4 million Daltons, dissolved in physiological saline with an average osmolarity of 335 milliosmols, in a prefilled syringe. The sodium hyaluronate is obtained by bacterial fermentation of a Streptococcus strain and subsequently purified.Each milliliter of Hialurom contains 15 mg sodium hyaluronate, sodium chloride, and water for injection.Sterile by moist heat.INDICATIONS:Hialurom is indicated as a viscoelastic supplement or replacement of synovial fluid in the human knee joint.Hialurom is indicated for the symptomatic treatment of knee osteoarthritis. Hialurom acts as a lubricant and mechanical support.CONTRAINDICATIONS:The following pre-existing conditions may represent relative or absolute contraindications for the use of Hialurom:allergies (hypersensitivity) to any of the components of Hialurom,existing skin infections at the injection site,known infection in the index finger joint,known systemic bleeding disorders.Hialurom may contain traces of proteins from gram-positive bacteria and is contraindicated for patients with known allergies of this type.POSSIBLE SIDE EFFECTS:Sodium hyaluronate is a natural component of human tissue. Since sodium hyaluronate is classified as non-inflammatory, all inflammatory reactions are attributed to the injection procedure itself. Occasionally, mild to moderate temporary swelling and discomfort have been observed after intraarticular injection of sodium hyaluronate preparations. There are minimal risks associated with the injection procedure, primarily infections and bleeding.ADMINISTRATION AND DOSAGE:Hialurom may only be administered by medical professionals trained in intraarticular injection techniques.Hialurom may only be administered intraarticularly.It must not be administered intravenously.Strict aseptic administration techniques must be followed.The injection site must be properly disinfected (70% alcohol or another disinfectant). Disinfectants containing quaternary ammonium salts should not be used for skin disinfection, as this may cause a failure reaction of the hyaluronic acid. Hialurom is administered once weekly into the affected joint over three consecutive weeks. For bilateral treatment, a separate syringe should be used for each knee. Each joint may only undergo one treatment cycle within a 6-month period.Any joint effusion must be removed by joint aspiration before injecting Hialurom. The joint space must not be overfilled. Hialurom is available as a prefilled syringe and must not be diluted. The contents of the Hialurom prefilled syringe are sterile and must be used immediately once the package is opened. Hialurom must be slowly injected into the joint space using a standard intra-articular injection technique.Remove the prefilled syringe from the packaging. Break the visible seal before use and remove the cap from the prefilled syringe. Attach the hypodermic needle of a suitable size (gauge) and length (inch) and ensure it is properly secured by gently twisting. Prime the syringe before injection.Common needle sizes for injections into the knee are between 18 and 21 G (1.2-0.8 mm).The final choice of needle for each treatment is made by the doctor,PRECAUTIONS:General precautions for intraarticular injections must be observed. Hialurom must only be injected into the joint space by trained medical personnel. If pain increases during the injection, the injection must be stopped and the needle withdrawn.Patients must be carefully examined for signs of acute inflammation before administration, and the doctor must decide whether treatment with Hialurom should be started in such cases.As with any invasive joint procedure, it is recommended not to overload the joint immediately after...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-forte-actrevo-gmbh-gelenkspritzen-stakonmed-243872.jpg?v=1772214439\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-forte-actrevo-gmbh-gelenkspritzen-stakonmed-880152.jpg?v=1772214463\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-forte-actrevo-gmbh-gelenkspritzen-stakonmed-489970.jpg?v=1772214463\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hialurom-forte-1-x-2-ml?variant=47355879489876\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":49.95,"price":29.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"actrevo GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 30 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674276028756","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"12552265"}
{"item_group_id":8748731269460,"aid":47355879522644,"name":"Hialurom Hondro 1x 3.0 ml","brand":"actrevo GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hialurom \u003e Joint injections","tags":"18739042,actrevo GmbH,cat_Gelenkspritzen,cat_Hialurom","mpnr":"114","desc":"HIALUROM HONDROSodium hyaluronate 60 mg\/3 ml and chondroitin sodium sulfate 90 mg\/3 ml, solution for injection in a prefilled syringe.For intra-articular injectionDESCRIPTION:Hialurom Hondro is a sterile, viscoelastic solution containing two highly purified cross-linked biological polymers, sodium hyaluronate and chondroitin sodium sulfate. Hialurom Hondro consists of sodium hyaluronate derived from bacterial fermentation of a Streptococcus strain and chondroitin sodium sulfate derived from bovine cartilage.Hialurom Hondro is a sterile, viscoelastic solution obtained using aseptic processing techniques and supplied in a single-use glass syringe containing 3 ml of solution.COMPOSITION:Each prefilled syringe contains 60 mg sodium hyaluronate, 90 mg chondroitin sodium sulfate, sodium chloride, sodium dihydrogen phosphate monohydrate, disodium phosphate dodecahydrate, sodium hydroxide and\/or hydrochloric acid (for pH adjustment), and water for injection.INDICATIONS:Hialurom Hondro is indicated as a viscoelastic supplement or replacement for synovial fluid in the human knee joint.Hialurom Hondro is indicated for the symptomatic treatment of mild to severe knee osteoarthritis. Hialurom Hondro acts as a lubricant and mechanical support.CONTRAINDICATIONS:Hialurom Hondro must not be used in:known allergies (hypersensitivity) tosodium hyaluronate, chondroitin sulfate, or any other component of HialuromHondro,pre-existing skin infections at the injection site,known infection in the index finger joint,known systemic bleeding disorders, bleeding, or tendency to bleed.Hialurom Hondro may contain traces of proteins from gram-positive bacteria and is contraindicated for patients with known allergies of this type.Hialurom Hondro should not be used in patients with known hypersensitivity to bovine materials.POSSIBLE SIDE EFFECTS:After intra-articular injection of Hialurom Hondro, swelling and temporary pain may occur. These reactions generally subside within 72 hours.Reported product-related side effectsThe most frequently reported side effects after marketing related to the use of Hialurom Hondro wereJoint pain, joint stiffness, joint effusion, joint swelling, joint warming, and gait disturbance.Cases of fever and malaise have also been reported. These side effects improved within a few days after treatment, such as applying ice to the injection site, treatment with nonsteroidal anti-inflammatory drugs (NSAIDs), or antipyretics.DOSAGE AND METHOD OF ADMINISTRATION:Not for intravenous injection.This product is for intra-articular use only. It must not be injected extra-articularly.Strict aseptic administration techniques must be followed.The injection site must be properly disinfected (70% alcohol or another disinfectant).Disinfectants containing quaternary ammonium salts should not be used for skin disinfection, as this may cause a reaction with the hyaluronic acid.If present, remove joint effusions before injecting Hialurom Hondro. Joint puncture (arthrocentesis) before injection is recommended. Remove the prefilled syringe from the packaging. Break the visible seal before administration and remove the cap from the prefilled syringe. Attach the hypodermic needle of an appropriate gauge and length and ensure it is properly secured by gently twisting. Common needle sizes for knee injections range between 18 and 21 G (1.2–0.8 mm).The final choice of needle for each intra-articular treatment is made by the physician.Injection of subcutaneous lidocaine or another anesthetic before the injection with Hialurom Hondro may be advisable.As with any invasive joint procedure, it is recommended that the patient avoid any strenuous activity and prolonged (e.g., over one hour) physical exertion, such as tennis or jogging, for 48 hours after the injection.PRECAUTIONS FOR USE:Although sodium hyaluronate and chondroitin sodium sulfate are highly purified biological polymers, the physician must be aware of the risks of allergies inherently associated with the...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-hondro-actrevo-gmbh-gelenkspritzen-stakonmed-981485.jpg?v=1772214526\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-hondro-actrevo-gmbh-gelenkspritzen-stakonmed-171018.jpg?v=1772214526\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-hondro-actrevo-gmbh-gelenkspritzen-stakonmed-557357.jpg?v=1772214526\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hialurom-hondro-1-x-3-ml?variant=47355879522644\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":269.0,"price":121.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"actrevo GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 60 mg \/ 3 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674278519124","meta_packungsgr_e":"1 Fertigspritze a 3 ml","meta_pzn":"12552271"}
{"item_group_id":8748731302228,"aid":47355879555412,"name":"Hialurom Tendon 1x 2.0 ml","brand":"actrevo GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hialurom \u003e Joint injections","tags":"12552288,actrevo GmbH,cat_Gelenkspritzen,cat_Hialurom","mpnr":"115","desc":"HIALUROM TendonSodium hyaluronate 40 mg\/2 ml, sterile solution for injection in a prefilled syringeFor peritendinous injection or injection into the tendon sheath.Hialurom Tendon is a viscoelastic, isotonic solution containing 40 mg\/2 ml sodium hyaluronate in a physiological buffer solution. It also contains sodium chloride and mannitol (pH 7-8). Sodium hyaluronate is obtained by bacterial fermentation of a Streptococcus strain and subsequently purified.Sterile by moist heat.Indications:For pain relief and limited mobility in tendon disorders.Contraindications:Hialurom Tendon must not be used in:- known hypersensitivity to any of the components of Hialurom Tendon, known allergies (hypersensitivity) to proteins from gram-positive bacteria, existing infections at the injection site if other medications have already been injected at or around the injection site.Possible side effects:Local side effects such as pain, warmth, bruising, redness, and swelling may occur after treatment with Hialurom Tendon.Dosage and method of application:Hialurom Tendon should only be administered by medical professionals trained in the specific injection techniques of peritendinous injection or injection into the tendon sheath.Injection into the tendon sheath:For tendons with a tendon sheath, Hialurom Tendon is injected directly into the tendon sheath in the affected area.Peritendinous injection:For tendons without a tendon sheath, the product is applied along the affected tendon but not into the tendon itself.Inject Hialurom Tendon a total of 2 times at weekly intervals around the affected tendon or into the affected tendon sheath. Multiple tendons can be treated simultaneously. Repeat treatments are possible if needed.The contents of the Hialurom Tendon prefilled syringe are sterile.The prefilled syringe is taken out of the sterile packaging, the cap is removed, a suitable needle (e.g., 25 to 27G) is attached and secured with a slight twist.Needle selection is the responsibility of the physician. Various factors influence the choice of the correct needle length and thickness, such as the anatomy of the treatment site, the distance of the tendon to be treated from the skin, and patient-specific factors like weight and age. Ultrasound monitoring of the treatment is recommended.Remove any air bubbles before use.Interactions:No information is currently available on interactions of Hialurom Tendon with other drugs.Precautions:Caution in patients with known hypersensitivity to medications.General precautions for peritendinous injections or injections into the tendon sheath must be observed.Hialurom Tendon must be correctly injected into the tendon sheath or correctly applied around the affected tendon, if necessary under ultrasound guidance.Avoid nerve injuries and injections into blood vessels.The product should not be used in patients with known systemic bleeding disorders or a history of vasovagal reactions or syncope.There is insufficient data to recommend the use of sodium hyaluronate in children, adolescents, pregnant or breastfeeding women. Treatment with Hialurom Tendon is not recommended in these cases.Patients who develop complications in the days following the injection must see a doctor immediately.Warnings:Single-use product! The product Hialurom Tendon 40 mg\/2 ml is intended for single use for one patient only.Do not use the prefilled syringe if the seal or blister is damaged. Solution not used immediately after opening must be discarded and must not be used otherwise. After the first injection, the sterility of the solution can no longer be guaranteed.Used needles and syringes must be disposed of after each injection and must not be kept for other administrations.Do not reuse! Reusing used needles and syringes can lead to the transmission of infectious agents (including HIV and hepatitis).The product must not be re-sterilized, as this can damage or alter the product.General aseptic precautions must be observed to protect the patient fro...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-tendon-actrevo-gmbh-gelenkspritzen-stakonmed-867519.jpg?v=1772214491\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-tendon-actrevo-gmbh-gelenkspritzen-stakonmed-477659.jpg?v=1772214491\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hialurom-tendon-actrevo-gmbh-gelenkspritzen-stakonmed-692287.jpg?v=1772214491\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hialurom-tendon-1-x-2-ml?variant=47355879555412\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":79.95,"price":52.89,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"actrevo GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 40 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674282254676","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"12552288"}
{"item_group_id":8748731367764,"aid":47355879620948,"name":"Hya Ject 1x 2.0 ml","brand":"ORMED GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hya-Ject \u003e Joint injections","tags":"8770677,cat_Gelenkspritzen,cat_Hya Ject,ORMED GmbH","mpnr":"117","desc":"HYA-JECT®Sodium hyaluronate 1.0%. Viscous-elastic solution for injection into the joint space to improve mobility and relieve pain in osteoarthritis. Transparent solution made from natural, highly purified sodium hyaluronate obtained by fermentation. Free of animal proteins. Sterilized with moist heat. The contents and the outer surface of the HYA-JECT® prefilled syringe are sterile as long as the sterile barrier is intact. For single use only.Composition:1 ml isotonic solution (pH 7) contains 10.0 mg sodium hyaluronate, sodium chloride, disodium phosphate, sodium dihydrogen phosphate, and water for injection purposes.Indications:Pain and restricted mobility of the knee and other large synovial joints such as hip and shoulder.Contraindications:HYA-JECT® must not be administered to patients with known hypersensitivity to any of the components of the product.Precautions:Treatment with HYA-JECT® is not recommended for children, pregnant or breastfeeding women, or in inflammatory joint diseases such as rheumatoid arthritis or ankylosing spondylitis. If a joint effusion is present, it should be reduced first. National guidelines for intra-articular injections must be followed, including thorough disinfection of the injection site and other measures to prevent joint infections. HYA-JECT® should be injected precisely into the joint space, if necessary under imaging guidance. Avoid injections into blood vessels or surrounding tissue. Do not use if the prefilled syringe or sterile packaging is damaged. Any solution not used immediately after opening must be discarded. Otherwise, sterility cannot be guaranteed, which may pose an infection risk. Do not re-sterilize as this may damage the product. There is currently no information on impairment of diagnostic procedures such as magnetic resonance imaging, clinical assessments, or therapeutic treatments by HYA-JECT®.Interactions:There is currently no information on incompatibility of HYA-JECT® with other medical devices and drugs for intra-articular use or with oral analgesics or anti-inflammatory drugs.Side effects:In very rare cases (less than 1 in 10,000 patients), local reactions such as pain, warmth, redness, swelling\/joint effusion, itching, and other local intolerance reactions may occur during or after injection of HYA-JECT®. As with all invasive joint treatments, infection may occur in very rare cases. It cannot be completely excluded that in very rare cases the intra-articular injection itself causes systemic side effects such as tachycardia, hypotension, hypertension, palpitations, nausea, and shortness of breath. These reactions may occur independently of the solution administered. Patients should be informed about contraindications and side effects before injection of HYA-JECT®.Reporting of side effects:Any serious incident related to the medical device must be reported to the manufacturer TRB CHEMEDICA AG and the responsible local authority of the user.Dosage and administration:Inject HYA-JECT® 3–5 times at weekly intervals into the affected joint. Multiple joints can be treated simultaneously. Depending on the severity of the joint disease, the positive effect of a treatment cycle of five intra-articular injections can last at least six months. Sodium hyaluronate itself is broken down within a few days. If necessary, the treatment cycle can be repeated. Remove the prefilled syringe from the sterile packaging, remove the Luer Lock cap from the syringe, attach a suitable needle with Luer connection (e.g., 18 to 25 G) and lock it by slight rotation. Remove any air bubbles from the syringe before injection.Disposal:Dispose of the syringe immediately after use in an appropriate safety container. Do not throw the HYA-JECT® prefilled syringe into household waste. Follow local regulations for proper disposal of the safety container.Properties and mode of action:Synovial fluid, which behaves viscoelastically due to the presence of hyaluronic acid, is found in all synovial joints, w...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-ormed-gmbh-gelenkspritzen-stakonmed-740229.jpg?v=1772214594\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-ormed-gmbh-gelenkspritzen-stakonmed-433100.jpg?v=1772214594\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-ormed-gmbh-gelenkspritzen-stakonmed-608583.jpg?v=1772214594\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hya-ject-1-x-2-ml?variant=47355879620948\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":62.5,"price":19.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ORMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674286350676","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"8770677"}
{"item_group_id":8748731334996,"aid":47355879588180,"name":"Hya Ject mini 1x 1.0 ml","brand":"ORMED GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hya-Ject \u003e Joint injections","tags":"4211461,cat_Gelenkspritzen,cat_Hya Ject,ORMED GmbH","mpnr":"116","desc":"INFORMATION FOR USE HYA-JECT® MINISodium hyaluronate from fermentation 1.0%. Viscoelastic solution for injection into small joints. Sterile by moist heat.Composition:1 ml isotonic solution contains 10.0 mg sodium hyaluronate as well as sodium chloride, disodium hydrogen phosphate, sodium dihydrogen phosphate, and water for injection purposes.Indications:Pain and restricted mobility in degenerative and traumatic changes of small synovial joints, such as the facet joints of the lumbar spine, the thumb saddle joint, the interphalangeal joints of fingers and toes, the big toe metatarsophalangeal joint, and the temporomandibular joint. For the treatment of large joints such as knee, hip, or shoulder joints, HYA-JECT® pre-filled syringes with 20 mg\/2.0 ml should be used.Contraindications:Do not use HYA-JECT® MINI in case of known hypersensitivity to any of the ingredients.Interactions:No incompatibility (intolerance) of HYA-JECT® MINI with other intra-articularly applicable solutions has been reported so far. Concurrent use of orally administered analgesic and anti-inflammatory drugs during the first treatment days may be helpful for the patient.Side effects:During or after injection of HYA-JECT® MINI, very rare local and general accompanying symptoms such as pain, sensation of heat, redness, swelling\/joint effusion, and palpitations may occur.Dosage instructions and method of administration:Inject HYA-JECT® MINI a total of 1–3 times at weekly intervals into the affected joint. Multiple joints can be treated simultaneously. Depending on the severity of the joint disease, the effect of one treatment can last more than six months. Repeated treatment cycles are possible if needed. In case of joint effusion, puncture of the effusion, immobilization of the joint, and application of an ice pack and\/or intra-articular administration of corticosteroids are recommended. Treatment with HYA-JECT® MINI is started two to three days later. As long as the sterile packaging is unopened, the content and surface of the pre-filled syringe remain sterile. Remove the pre-filled syringe from the sterile packaging, unscrew the cap from the Luer-Lock connection, attach a suitable cannula (e.g., 19 to 25 G), and lock it with a slight twist. Before injection, remove any air bubble present in the syringe.Precautions:Use caution when applying HYA-JECT® MINI in patients with known hypersensitivity to drugs. As with all invasive joint treatments, infection can occur in very rare cases. Therefore, general precautions for intra-articular injections should be observed, including measures to prevent joint infection. HYA-JECT® MINI should be correctly injected into the joint space, if necessary under fluoroscopic control. Avoid injections into blood vessels and surrounding tissue! Since there is insufficient experience with the use of hyaluronic acid in children, pregnant and breastfeeding women, or patients with inflammatory joint diseases such as rheumatoid arthritis and ankylosing spondylitis, the use of HYA-JECT® MINI is not recommended in these cases. Do not use if the pre-filled syringe or sterile packaging is damaged. Any solution not used immediately after opening must be discarded. Otherwise, sterility is no longer guaranteed, which can lead to an infection risk. Store between 2 °C and 25 °C! Observe expiration date. Keep out of reach of children!Properties and mode of action:Joint lubricant, which behaves viscoelastically due to its hyaluronic acid content, is present in all synovial joints, where it ensures normal, pain-free movement due to its lubricating and shock-absorbing properties. It is also responsible for supplying nutrients to the joint cartilage. In degenerative joint diseases, such as osteoarthritis, the viscoelasticity of the joint lubricant is significantly impaired, reducing its lubricating and shock-absorbing effect. This increases the mechanical load on the joint and the breakdown of joint cartilage to such an extent that pain and restr...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-mini-ormed-gmbh-gelenkspritzen-stakonmed-907088.jpg?v=1772214557\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-mini-ormed-gmbh-gelenkspritzen-stakonmed-896872.jpg?v=1772214557\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-mini-ormed-gmbh-gelenkspritzen-stakonmed-967597.jpg?v=1772214546\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hya-ject-mini-1-x-1-ml?variant=47355879588180\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":41.5,"price":16.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ORMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 10 mg \/ 1 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652548055380","meta_packungsgr_e":"1 Fertigspritze a 1 ml","meta_pzn":"4211461"}
{"item_group_id":8748731400532,"aid":47355879653716,"name":"Hya Ject Plus 1x 2.0 ml","brand":"ORMED GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hya-Ject \u003e Joint injections","tags":"826266,cat_Gelenkspritzen,cat_Hya Ject,ORMED GmbH","mpnr":"118","desc":"HYA-JECT® PLUSSodium hyaluronate 2.0%. Viscous-elastic solution for injection into the joint space to improve mobility and for pain relief in osteoarthritis. Transparent solution made from natural, highly purified, fermentation-derived sodium hyaluronate. Free from animal proteins. Sterilized with moist heat. The contents and the outer surface of the HYA-JECT® PLUS prefilled syringe are sterile as long as the sterile barrier is intact. For single use only.Composition:1 ml isotonic solution (pH 7) contains 20.0 mg sodium hyaluronate, sodium chloride, disodium phosphate, sodium dihydrogen phosphate, mannitol, and water for injection.Indications:Pain and restricted mobility of the knee and other large synovial joints such as hip and shoulder.Contraindications:HYA-JECT® PLUS must not be administered to patients with known hypersensitivity to any of the components of the product.Precautions:Treatment with HYA-JECT® PLUS is not recommended for children, pregnant or breastfeeding women, or in inflammatory joint diseases such as rheumatoid arthritis or ankylosing spondylitis. If a joint effusion is present, it should be reduced first. National guidelines for intra-articular injections must be observed, including thorough disinfection of the injection site and other measures to prevent joint infections. HYA-JECT® PLUS should be injected precisely into the joint space, if necessary under imaging guidance. Avoid injections into blood vessels or surrounding tissue. Do not use if the prefilled syringe or sterile packaging is damaged. Any solution not used immediately after opening must be discarded. Otherwise, sterility cannot be guaranteed, which may pose an infection risk. Do not re-sterilize as this may damage the product. There is currently no information on interference with diagnostic procedures such as magnetic resonance imaging, clinical assessments, or therapeutic treatments by HYA-JECT® PLUS.Interactions:There is currently no information on incompatibility of HYA-JECT® PLUS with other medical devices and drugs for intra-articular use or with oral analgesics or anti-inflammatory drugs.Side effects:In very rare cases (less than 1 in 10,000 patients), local side effects such as pain, warmth, redness, swelling\/joint effusion, itching, and other local intolerance reactions may occur during or after injection of HYA-JECT® PLUS. As with all invasive joint treatments, infection may occur in very rare cases. It cannot be completely excluded that in very rare cases the intra-articular injection itself causes systemic side effects such as tachycardia, hypotension, hypertension, palpitations, nausea, and shortness of breath. These reactions may occur independently of the applied solution. Patients should be informed about contraindications and side effects before injection of HYA-JECT® PLUS.Reporting side effects:Any serious incident related to the medical device must be reported to the manufacturer TRB CHEMEDICA AG and the responsible local authority of the user.Dosage and administration:Inject HYA-JECT® PLUS a total of 1–3 times at weekly intervals into the affected joint. Multiple joints can be treated simultaneously. Depending on the severity of the joint disease, the positive effect can last at least six months. Sodium hyaluronate itself is broken down within a few days. If necessary, the treatment cycle can be repeated. Remove the prefilled syringe from the sterile packaging, remove the Luer Lock cap from the syringe, attach a suitable needle with Luer connection (e.g., 18 to 25 G) and lock it by slight rotation. Remove any air bubbles from the syringe before injection.Disposal:Dispose of the syringe immediately after use in an appropriate safety container. Do not throw the HYA-JECT® PLUS prefilled syringe into household waste. Follow local regulations for proper disposal of the safety container.Properties and mode of action:Synovial fluid, which behaves viscoelastically due to the presence of hyaluronic acid, is found in all synovi...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-plus-ormed-gmbh-gelenkspritzen-stakonmed-716557.jpg?v=1772214625\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-plus-ormed-gmbh-gelenkspritzen-stakonmed-687815.jpg?v=1772214625\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hya-ject-plus-ormed-gmbh-gelenkspritzen-stakonmed-268552.jpg?v=1772214625\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hya-ject-plus-1-x-2-ml?variant=47355879653716\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":138.6,"price":57.85,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ORMED GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 40 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/46652582265172","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"826266"}
{"item_group_id":11997438968148,"aid":51849352380756,"name":"HyalOne 1x 4.0 ml","brand":"Fidia Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e HyalOne \u003e Joint injections","tags":"cat_Gelenkspritzen,cat_HyalOne,Fidia Pharma GmbH","mpnr":"121","desc":"Hyaluronic Acid Sodium Salt Solution for Intraarticular InjectionPre-filled syringe 60 mg\/4 mlProduct DescriptionHYALONE® is a sterile, pyrogen-free, viscoelastic hyaluronic acid sodium salt solution obtained by bacterial fermentation from a high molecular weight fraction. Hyaluronic acid, a polysaccharide of the glycosaminoglycan family, is found in many human tissues, such as cartilage or joint fluid (synovial fluid); it is continuously released into the joint space and constitutes a main component of synovial fluid, giving it its characteristic viscosity and elasticity. These properties are essential for the lubricating and shock-absorbing functions that synovial fluid performs in a healthy joint to protect cartilage and soft tissues from mechanical injury. In traumatic and degenerative joint damage, there is an insufficient supply of hyaluronic acid to the synovial fluid and a loss of viscosity. This leads to impaired joint function and painful symptoms. Extensive data in the literature show that the viscoelastic properties of synovial fluid can be restored by intraarticular administration of hyaluronic acid, resulting in pain relief and improved joint mobility.CompositionMain ingredient: Sodium salt of hyaluronic acid 1.5%. Other ingredients: Sodium chloride, disodium hydrogen phosphate dodecahydrate, sodium dihydrogen phosphate dihydrate, water for injection.IndicationsHYALONE® is a temporary synovial fluid substitute for patients with degenerative or mechanical arthropathy of the hip or knee joint, causing a functional alteration of the synovial fluid without acute synovitis.Dosage Instructions and Method of AdministrationApplication must only be performed by qualified physicians.All rules regarding asepsis and injection technique must be followed.If necessary, remove exudate before injecting HYALONE®.After the first application, further treatments may be necessary to maintain the treatment effect. This depends on the individual patient. Inject HYALONE® with a suitable sterile needle (e.g., 18 – 20 G).For hip joint application, ultrasound-guided injection is recommended. This is not necessary when HYALONE® is used in the knee joint.The outer surface of the syringe is sterile, making the product suitable for use in operating rooms.ContraindicationsHYALONE® must not be administered to patients with known individual hypersensitivity to any components of the preparation or in cases of infections or skin diseases at the injection site.There is no evidence of contraindications for repeated treatment.Warnings and PrecautionsPreclinical studies in laboratory animals show that the product has no potential reproductive or developmental toxicity. HYALONE® has not been tested in pregnant women. Do not use if the packaging is damaged.Do not use the product after the expiration date indicated on the packaging.The expiration date refers to storage of the product in the original packaging at a temperature not exceeding 25°C.HYALONE® is intended for single use only; after use, the syringe must be disposed of according to the regulations applicable in the respective country.This product is a single-use syringe, meaning the syringe should only be used on the same patient. The pre-filled syringe must be disposed of immediately after use, even if the injection solution has not been completely used up.If the product is reprocessed and\/or reused, Fidia Farmaceutici cannot guarantee the efficacy, function, material structure, purity, or sterility of the product. Reuse may lead to illness, infection, and\/or serious injury to the patient. Disposal of the pre-filled syringe after use must comply with national guidelines.Keep out of reach of children.Adverse ReactionsOccasionally, local pain, swelling, warmth, and redness may occur at the injection site. Such symptoms are generally mild and temporary.More pronounced inflammatory reactions, as sometimes seen with sodium pyrophosphate crystals, have occasionally been reported in connection with i...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hyalone-1x-40-ml-fidia-pharma-gmbh-gelenkspritzen-stakonmed-8505308.jpg?v=1772274015\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hyalone-1x-40-ml-fidia-pharma-gmbh-gelenkspritzen-stakonmed-9117331.jpg?v=1772274014\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hyalone-1x-40-ml-fidia-pharma-gmbh-gelenkspritzen-stakonmed-3380584.jpg?v=1772274012\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hyalone?variant=51849352380756\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":245.0,"price":121.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Fidia Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57234692800852","meta_packungsgr_e":"1 Fertigspritze a 4 ml","meta_pzn":"10264734"}
{"item_group_id":8748731466068,"aid":47355879719252,"name":"Hyalubrix 1x 2.0 ml","brand":"Fidia Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hyalubrix \u003e Joint injections","tags":"10795791,cat_Gelenkspritzen,cat_Hyalubrix,Fidia Pharma GmbH","mpnr":"120","desc":"Solution with the sodium salt of hyaluronic acid for intraarticular usePre-filled syringeProduct descriptionHYALUBRIX is a sterile, viscoelastic solution containing the sodium salt of hyaluronic acid, obtained by bacterial fermentation from a high molecular weight fraction.Hyaluronic acid is an endogenous polysaccharide of the glycosaminoglycan family found in cartilage and joint fluid. It is continuously released into the joint and is one of the main components of joint fluid, giving it its characteristic viscosity and elasticity. These properties are crucial for the lubricating and shock-absorbing function of the fluid in healthy joints to protect cartilage and soft tissues from mechanical injury.Traumatic and degenerative joint changes lead to a deficiency of hyaluronic acid and a loss of viscosity in the joint fluid, which in turn impairs joint function and causes painful symptoms. Numerous data in the literature show that intraarticular injection of hyaluronic acid can restore the viscoelastic properties of the joint fluid.HYALUBRIX serves as a temporary replacement of joint fluid in patients with degenerative or mechanical joint disease that causes changes in the functional properties of the joint fluid. Weekly intraarticular injections of HYALUBRIX provide pain relief and improvement of joint function for up to six months in patients with degenerative or mechanical joint changes.CompositionMain ingredient: sodium salt of hyaluronic acid 1.5%Other ingredients: sodium chloride, disodium hydrogen phosphate dodecahydrate, sodium dihydrogen phosphate dihydrate, water for injection.Areas of applicationHYALUBRIX is indicated for the treatment of pain and improvement of joint function in patients with degenerative or mechanical joint changes of the knee, hip, shoulder, ankle, and thumb saddle joint.The product is indicated for the treatment of persistent pain after initial failure of analgesics or failure or intolerance of nonsteroidal anti-inflammatory drugs.Intended useHYALUBRIX is a temporary joint fluid substitute and must be injected intraarticularly.Dosage and method of administrationHYALUBRIX is intended exclusively for intra-articular injection.The product may only be used by licensed physicians (e.g., orthopedists, rheumatologists, specialists in physical and rehabilitative medicine, radiologists, sports medicine doctors, etc.).The injection must be strictly intra-articular. The intra-articular injection must be performed according to the usual standard technique, taking anatomical conditions into account. For the hip, shoulder, and other less accessible joints, sonographic or fluoroscopic guidance is recommended.Inject HYALUBRIX into the affected joint at weekly intervals over three weeks using a suitable sterile needle (e.g., 18 or 20 G).If necessary, treatment can be repeated. However, no systematically collected data are available for this.Clinical data demonstrate the efficacy of HYALUBRIX for up to six months. If clinically necessary, treatment can be repeated from three months after the first treatment cycle.All rules of aseptic technique and injection procedure must be observed.Any joint effusion must be removed before use.ContraindicationsDo not administer to patients with known hypersensitivity to any of the product components.Do not administer if infections or skin diseases are present at the injection site.Do not administer to patients with active synovitis.Use in certain patient groupsThe safety and efficacy of HYALUBRIX in pregnant or breastfeeding women or patients under 18 years of age have not been studied. Therefore, use in these patient groups is contraindicated.Warnings and precautionsDo not use if the packaging is damaged.Do not use the product after the expiration date indicated on the packaging. The expiration date applies to the product stored in the original packaging at a temperature not exceeding 25 °C.The syringe is intended for single use only, i.e., for one injection in one patient. Inj...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hyalubrix-1x-20-ml-fidia-pharma-gmbh-gelenkspritzen-stakonmed-2067480.jpg?v=1777230013\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hyalubrix-1x-20-ml-fidia-pharma-gmbh-gelenkspritzen-stakonmed-9488035.jpg?v=1777230012\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hyalubrix-1x-20-ml-fidia-pharma-gmbh-gelenkspritzen-stakonmed-9177535.jpg?v=1777230013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hyalubrix-1-x-2-ml?variant=47355879719252\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":49.9,"price":21.8,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Fidia Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 30 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"10795791"}
{"item_group_id":8748731498836,"aid":47355879752020,"name":"Hymovis 2x 3.0 ml","brand":"Fidia Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Hymovis \u003e Joint injections","tags":"10264740,cat_Gelenkspritzen,cat_Hymovis,Fidia Pharma GmbH","mpnr":"121-1","desc":"HYADD® 4 for intra-articular injectionPre-filled syringeProduct descriptionHYMOVIS is a sterile, pyrogen-free hydrogel made with Hyadd4 (highly pure, naturally derived hexadecylamine sodium hyaluronate obtained by bacterial fermentation) in an isotonic buffered solution. Thanks to the high viscosity and elasticity of hexadecylamine sodium hyaluronate, HYMOVIS improves the lubricating function and shock absorption of synovial fluid and protects joint cartilage and soft tissues from mechanical injuries. Due to these properties, combined with an extended residence time in the joint, HYMOVIS relieves pain and simultaneously improves joint function within a short treatment regimen.CompositionMain ingredient: Hyadd4 (sodium hyaluronate-hexadecylamide), 24 mg\/3 ml.Other ingredients: sodium chloride, disodium hydrogen phosphate dodecahydrate, sodium dihydrogen phosphate dihydrate, water for injection.IndicationsHYMOVIS is indicated for the treatment of pain in osteoarthritis and for the conservative treatment of meniscus injuries of the knee, as well as to improve joint mobility by increasing the viscoelasticity of the synovial fluid.Method of administrationHYMOVIS is intended for intra-articular injection only.The product must only be administered by a physician.Since the syringe is also sterile on the outside, it may be used for intra-articular injection in the operating room.Due to its viscosity, HYMOVIS must be injected slowly into the affected joint using a suitable sterile needle (18 or 20 G).All regulations for sterile administration must be strictly observed.Joint effusions must be removed before injecting HYMOVIS.DosageIn case of osteoarthritis, a treatment cycle consists of two injections administered one week apart.In case of meniscus injury, a treatment cycle consists of two injections administered two weeks apart.ContraindicationsThe product must not be administered to patients with known hypersensitivity to any of the ingredients of the medicinal product or with infections or skin diseases at the injection site.Warnings and precautionsTreatment must be discontinued in case of signs of acute inflammation.The safety and efficacy of HYMOVIS in children and pregnant women have not been established.The safety and efficacy of using HYMOVIS simultaneously with other intra-articular treatments have not been established.The syringe is intended for single use; its contents must be injected into only one joint.In case of reprocessing and\/or reuse, Fidia Farmaceutici cannot guarantee the efficacy, functionality, material structure, purity, or sterility of the medicine. Reuse may lead to illness, infections, and\/or serious injury to the patient or user.HYMOVIS must not be used after the expiration date indicated on the packaging. The expiration date refers to the product properly stored in the original packaging.HYMOVIS must not be used if the packaging is opened or damaged.Keep medicines out of reach of children.Side effectsLocalized side effects such as pain, swelling\/effusion, warmth, and redness may occur at the injection site. Such symptoms are usually mild and temporary.More pronounced inflammatory reactions have been reported in connection with intraarticular injections of hyaluronate.As with any intraarticular treatment, septic arthritis may rarely occur if general sterility precautions for the injection are not observed.InteractionsThe product must not be used together with disinfectants containing quaternary ammonium salts, as sodium hyaluronate hexadecylamide may precipitate in their presence.To avoid potential interactions, HYMOVIS should not be used simultaneously with other products administered intraarticularly.StorageStore in the original packaging. Do not store above 25 °C. Do not freeze.Type and content of the container  Package with 1 Luer Lock prefilled syringe  Package with 2 Luer Lock prefilled syringesEach syringe has a backstop and is sealed in an ethylene oxide-sterilized blister pack.Each syringe contains...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hymovis-2x-30-ml-fidia-pharma-gmbh-stakonmed-4284658.jpg?v=1772274012\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/hymovis-2x-30-ml-fidia-pharma-gmbh-stakonmed-4135317.jpg?v=1772274014\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/hymovis-2x-30-ml-fidia-pharma-gmbh-stakonmed-2550275.jpg?v=1772274013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/hymovis-2-x-3-ml?variant=47355879752020\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":530.74,"price":362.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Fidia Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 24 mg \/ 3 ml","meta_packungsgr_e":"2 Fertigspritzen a 3 ml","meta_pzn":"10264740"}
{"item_group_id":8748734218580,"aid":47355895087444,"name":"Juvederm Ultra 3 2x 1.0 ml","brand":"Allergan Pharmaceuticals","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Juvederm","tags":"Allergan Pharmaceuticals Ireland,cat_Filler,cat_Juvederm","mpnr":"218","desc":"Juvéderm® Ultra 3Juvéderm® Ultra 3 by Allergan is a hyaluronic acid dermal filler for correcting medium to deep wrinkles as well as improving lip contours and targeted volume augmentation. The smooth gel can be evenly injected into the tissue, allowing precise, comfortable application for doctors and practitioners.Thanks to the addition of lidocaine, the treatment is pleasant and largely painless for the patient. Juvéderm® Ultra 3 supports the restoration of clearly defined facial contours and is especially suitable for volume building in the cheek and chin areas. Wrinkles are effectively filled, giving the treated areas a softer and natural appearance. Initial results are immediately visible, and the natural lifting effect can last up to 18 months.Treatment areasEye areaGlabellar linesHand areaChin areaCrease wrinkles and marionette linesCrow's feetLipsMentolabial and nasolabial foldsMouth corner areaNose areaPerioral wrinklesForehead area and forehead wrinklesCheek areaProduct featuresSoft, smooth hyaluronic acid gel for treating fine lines to pronounced wrinklesSuitable for wrinkle correction, contour improvement, and volume enhancement, including the lipsBiodegradable hyaluronic acid, modeled after the naturally occurring hyaluronic acid in the skinEven tissue integration for a natural appearance and immediately visible resultsPleasant, largely painless application thanks to contained lidocaineGPSR informationGeneral informationCE marking: YesManufacturer informationName: AllerganAddress: Route de Promery, Zone Artisanale de Pre-Mairy, Pringy – 74370 Annecy, FranceE-mail: info.de@abbvie.comWebsite: https:\/\/www.abbvie.deEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-3-allergan-pharmaceuticals-ireland-filler-stakonmed-788036.jpg?v=1772214728\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-3-allergan-pharmaceuticals-ireland-filler-stakonmed-536264.jpg?v=1772214728\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-3-allergan-pharmaceuticals-ireland-filler-stakonmed-884143.jpg?v=1772214720\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/juvederm-ultra-3-2-x-1-0-ml?variant=47355895087444\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":293.93,"price":177.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Allergan Pharmaceuticals Ireland","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":8748734251348,"aid":47355895120212,"name":"Juvederm Ultra 4 2x 1.0 ml","brand":"Allergan Pharmaceuticals","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Juvederm","tags":"Allergan Pharmaceuticals Ireland,cat_Filler,cat_Juvederm","mpnr":"219","desc":"Juvéderm® Ultra 4Juvéderm® Ultra 4 by Allergan is a hyaluronic acid dermal filler for treating pronounced, deep wrinkles such as nasolabial and marionette lines. The smooth gel is also suitable for targeted volume enhancement in the cheek and chin areas as well as for lip shaping and contouring.The product is injected directly into the respective treatment area with a fine needle and shows immediate effect. Advanced technology with a special 3D matrix supports a longer residence time of the filler in the tissue. After injection, Juvéderm® Ultra 4 can remain effective for up to 12 months and helps smooth deep wrinkles as well as restore lost volume.Treatment areasCheek areaChin areaWrinkle linesNasolabial foldMentolabial fold \/ Marionette linesProduct featuresSoft, smooth hyaluronic acid gel for treating deep and pronounced wrinklesSuitable for volume enhancement, contour improvement, and lip shapingAdvanced 3D matrix technology for stable integration into the tissueBiodegradable hyaluronic acid, modeled after the body's own hyaluronic acidEven tissue distribution for a natural appearanceGood tolerance and comfortable application during injectionNotes on possible side effectsAs with all injection treatments, mild side effects may occur with the use of Juvéderm® Ultra 4. These include temporary redness, small bruises, swelling, or slight irritation at the injection site. These symptoms usually subside within a few days. The product is considered well tolerated; allergic reactions are generally possible with all medical products.GPSR informationGeneral informationCE marking: YesManufacturer informationName: AllerganAddress: Route de Promery, Zone Artisanale de Pre-Mairy, Pringy – 74370 Annecy, FranceEmail: info.de@abbvie.comWebsite: https:\/\/www.abbvie.deEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-4-allergan-pharmaceuticals-ireland-filler-stakonmed-409376.jpg?v=1772214748\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-4-allergan-pharmaceuticals-ireland-filler-stakonmed-680860.jpg?v=1772214754\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-4-allergan-pharmaceuticals-ireland-filler-stakonmed-447512.jpg?v=1772214754\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/juvederm-ultra-4-2-x-1-0-ml?variant=47355895120212\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":293.93,"price":183.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Allergan Pharmaceuticals Ireland","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":8748734284116,"aid":47355895152980,"name":"Juvederm Ultra Smile 2x 0.55 ml","brand":"Allergan Pharmaceuticals","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Juvederm","tags":"Allergan Pharmaceuticals Ireland,cat_Filler,cat_Juvederm","mpnr":"220","desc":"Juvéderm® Ultra SmileJuvéderm® Ultra Smile is a hyaluronic acid filler for targeted lip augmentation and precise definition of the lip contours. The product allows harmonious adjustment of the proportions of the upper and lower lip and ensures a natural-looking appearance.Additionally, the contained hyaluronic acid provides intensive moisture, giving the lips a fresh shine and a soft, smooth feel. Volume can be built up individually as needed.Treatment areasLipsProduct featuresSpecially developed formulation for a gentle and natural lip treatment with a smooth skin feelSupports a naturally appearing lip fullness with a balanced ratio between upper and lower lipPleasant and largely painless injection due to the addition of lidocaineGPSR informationGeneral informationCE marking: YesManufacturer informationName: AllerganAddress: Route de Promery, Zone Artisanale de Pre-Mairy, Pringy – 74370 Annecy, FranceEmail: info.de@abbvie.comWebsite: https:\/\/www.abbvie.deEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-smile-allergan-pharmaceuticals-ireland-filler-stakonmed-137161.jpg?v=1772214773\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-smile-allergan-pharmaceuticals-ireland-filler-stakonmed-340810.jpg?v=1772214773\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-ultra-smile-allergan-pharmaceuticals-ireland-filler-stakonmed-860549.jpg?v=1772214773\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/juvederm-ulta-smile-2-x-0-55-ml?variant=47355895152980\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":183.26,"price":119.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Allergan Pharmaceuticals Ireland","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 0,55 ml"}
{"item_group_id":11997530587476,"aid":51849663021396,"name":"Juvederm Volift Lidocaine 2x 1.0 ml","brand":"Allergan Pharmaceuticals","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Juvederm","tags":"Allergan Pharmaceuticals Ireland,cat_Filler,cat_Juvederm","mpnr":"225","desc":"Juvéderm® Volift LidocaineJuvéderm® Volift Lidocaine is a hyaluronic acid dermal filler for restoring natural facial contours and improving facial volume. The product is also suitable for correcting deep nasolabial folds as well as treating the tear trough and eye area and is often used for gentle facial tightening.Thanks to the addition of lidocaine, Juvéderm® Volift Lidocaine allows for a pleasant and largely painless injection. The gel integrates evenly into the tissue and shows an immediately visible, long-lasting, but not permanent effect.Treatment AreasEye AreaWrinkle LinesMouth Corner AreaNasolabial FoldsForehead AreaTear TroughsCheek AreaProduct FeaturesNext-generation hyaluronic acid filler based on Allergan's VYCROSS™ technologyBalanced ratio of low- and high-molecular-weight hyaluronic acid components for efficient cross-linkingImmediate onset, long-lasting effect with complete biological degradabilityFlexible treatment as the effect is not permanentComfortable, largely painless application due to contained lidocaineGPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: AllerganAddress: Route de Promery, Zone Artisanale de Pre-Mairy, Pringy – 74370 Annecy, FranceEmail: info.de@abbvie.comWebsite: https:\/\/www.abbvie.deEuropean Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-volift-lidocaine-2x-10-ml-allergan-pharmaceuticals-filler-stakonmed-2342963.jpg?v=1772274012\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-volift-lidocaine-2x-10-ml-allergan-pharmaceuticals-filler-stakonmed-7459768.jpg?v=1772274013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-volift-lidocaine-2x-10-ml-allergan-pharmaceuticals-filler-stakonmed-8205911.jpg?v=1772274014\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/juvederm-volift-mit-lidocain?variant=51849663021396\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":306.0,"price":238.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Allergan Pharmaceuticals Ireland","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":8748734120276,"aid":47355894989140,"name":"Juvederm Voluma Lidocaine 2x 1.0 ml","brand":"Allergan Pharmaceuticals","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Juvederm","tags":"Allergan Pharmaceuticals Ireland,cat_Filler,cat_Juvederm","mpnr":"228","desc":"Juvéderm® Voluma LidocaineJuvéderm® Voluma Lidocaine is a hyaluronic acid dermal filler for restoring lost facial volume and shaping clearly defined facial contours. The filler is especially suitable for volume enhancement in the cheek and chin areas as well as for contouring the jawline.Additionally, Juvéderm® Voluma Lidocaine can be used to correct deep facial wrinkles such as nasolabial and marionette lines. The included local anesthetic Lidocaine ensures a comfortable and largely painless injection. Natural, harmonious results are achieved through stable tissue integration.Treatment AreasChin AreaCheek AreaCrease WrinklesDeep Facial WrinklesNasolabial FoldsChin WrinklesMarionette LinesMandibular Line \/ JawlineFrown LinesProduct FeaturesHyaluronic acid filler to support youthful facial proportions with a subtle lifting effectPromotes skin moisture and contributes to improved elasticity and natural appearanceVYCROSS™ technology with low- and high-molecular-weight hyaluronic acid for a stably cross-linked gelLong-lasting effect of up to 18 months, depending on individual factorsComfortable application due to included LidocaineNotes on Possible Side EffectsAs with all injection treatments, temporary side effects may occur when using Juvéderm® Voluma Lidocaine. These include mild redness, small bruises, swelling, or slight itching at the injection site. Serious side effects are not known. The product is considered well tolerated; however, individual reactions are generally possible.GPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: AllerganAddress: Route de Promery, Zone Artisanale de Pre-Mairy, Pringy – 74370 Annecy, FranceE-Mail: info.de@abbvie.comWebsite: https:\/\/www.abbvie.deEuropean Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-voluma-lidocaine-2x-10-ml-allergan-pharmaceuticals-filler-stakonmed-8120956.jpg?v=1772274019\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-voluma-lidocaine-2x-10-ml-allergan-pharmaceuticals-filler-stakonmed-3187831.jpg?v=1772274018\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/juvederm-voluma-lidocaine-2x-10-ml-allergan-pharmaceuticals-filler-stakonmed-8361157.jpg?v=1772274019\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/juvederm-voluma-lidocain-2-x-1-0-ml?variant=47355894989140\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":306.0,"price":216.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Allergan Pharmaceuticals Ireland","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":15423873941844,"aid":55853743538516,"name":"KioMedine One 1x 3.0 ml (Best before 31.01.2027)","brand":"Aptissen GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synolis","tags":"cat_Gelenkspritzen,cat_Synolis","ean":"","mpnr":"121-2","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/kiomedine-one-1x-30-ml-mhd-31122026-aptissen-gmbh-gelenkspritzen-stakonmed-7386367.jpg?v=1779218655\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/kiomedine-one-1x-3-0-ml?variant=55853743538516\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":362.0,"price":133.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Aptissen GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 3 ml","meta_pzn":"19358402"}
{"item_group_id":15427984490836,"aid":55864051237204,"name":"Lemon Bottle 5x 10 ml (Best before 20.12.2026)","brand":"Lemon Bottle","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller","tags":"cat_Filler","ean":"","mpnr":"229-1","desc":"LEMON BOTTLELEMONBOTTLE is a cosmetic product intended exclusively for external use.Lemon Bottle by SID MEDICOS is a cosmetic care product for targeted use on various body areas. The formulation contains selected ingredients such as riboflavin, lecithin, and bromelain and is suitable for supportive skin care, especially in areas where a smoother and well-groomed skin appearance is desired.The product can be applied externally, for example, on the chin, abdomen, hips, thighs, or cheek area. The formula was developed for simple cosmetic use and is not for injection and not for use in the eye area.Features of Lemon BottleLemon Bottle is characterized by its cosmetic formulation with selected ingredients. The application is straightforward and can be integrated into your personal care routine as needed.The product is intended exclusively for external use. It contains, among other things, riboflavin, lecithin, and bromelain and can be applied to various body areas. Avoid contact with eyes, mucous membranes, and irritated or damaged skin.Instructions for useLemon Bottle is intended for adults and should only be applied externally to the desired body area. Use can vary depending on individual care routines.After use, mild skin reactions such as redness, tightness, or temporary irritation may occasionally occur. If skin reactions persist, discontinue use.For external use only. Do not inject. Do not apply in the eye area. Keep out of reach of children.","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/lemon-bottle-5x-10ml-mhd-20122026-lemon-bottle-filler-stakonmed-8826279.jpg?v=1779301572\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/lemon-bottle-5x-10ml-mhd-20122026-lemon-bottle-filler-stakonmed-5879351.jpg?v=1779301572\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/lemon-bottle-5x-10ml-mhd-20-12-2026?variant=55864051237204\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":149.0,"price":92.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"SID MEDICOS","meta_packungsgr_e":"5x 10ml"}
{"item_group_id":8748731564372,"aid":47355879817556,"name":"Monovisc 1x 4.0 ml","brand":"Plasmaconcept AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Monovisc","tags":"6716490,cat_Gelenkspritzen,cat_Monovisc,Plasmaconcept AG","mpnr":"122","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/monovisc-plasmaconcept-ag-gelenkspritzen-stakonmed-183397.jpg?v=1772214915\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/monovisc-plasmaconcept-ag-gelenkspritzen-stakonmed-547017.jpg?v=1772214921\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/monovisc-plasmaconcept-ag-gelenkspritzen-stakonmed-432825.jpg?v=1772214921\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/monovisc-1-x-4-ml?variant=47355879817556\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":259.0,"price":139.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Plasmaconcept AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 80 mg \/ 4 ml","meta_packungsgr_e":"1 Fertigspritze a 4 ml","meta_pzn":"6716490"}
{"item_group_id":8748731629908,"aid":47355879883092,"name":"Orthovisc 1x 2.0 ml","brand":"Plasmaconcept AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Orthovisc","tags":"787276,cat_Gelenkspritzen,cat_Orthovisc,Plasmaconcept AG","mpnr":"124","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-plasmaconcept-ag-gelenkspritzen-stakonmed-479783.jpg?v=1772214984\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-plasmaconcept-ag-gelenkspritzen-stakonmed-808190.jpg?v=1772214992\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-plasmaconcept-ag-gelenkspritzen-stakonmed-755802.jpg?v=1772214992\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/orthovisc-1-x-2-ml?variant=47355879883092\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":59.0,"price":37.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Plasmaconcept AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 30 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"787276"}
{"item_group_id":8748731597140,"aid":47355879850324,"name":"Orthovisc mini 1x 1.0 ml","brand":"Plasmaconcept AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Orthovisc","tags":"6716484,cat_Gelenkspritzen,cat_Orthovisc,Plasmaconcept AG","mpnr":"123","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-mini-1x-10-ml-plasmaconcept-ag-gelenkspritzen-stakonmed-6877324.jpg?v=1772274074\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-mini-1x-10-ml-plasmaconcept-ag-gelenkspritzen-stakonmed-3108888.jpg?v=1772274074\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-mini-1x-10-ml-plasmaconcept-ag-gelenkspritzen-stakonmed-3199654.jpg?v=1772274076\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/orthovisc-mini-1-x-1-ml?variant=47355879850324\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":39.0,"price":31.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Plasmaconcept AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 15 mg \/ 1 ml","meta_packungsgr_e":"1 Fertigspritze a 1 ml","meta_pzn":"6716484"}
{"item_group_id":8748731662676,"aid":47355879915860,"name":"Orthovisc T 1x 2.0 ml","brand":"Plasmaconcept AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Orthovisc","tags":"12907627,cat_Gelenkspritzen,cat_Orthovisc,Plasmaconcept AG","mpnr":"125","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-t-1x-20-ml-plasmaconcept-ag-gelenkspritzen-stakonmed-3522519.jpg?v=1772274012\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-t-1x-20-ml-plasmaconcept-ag-gelenkspritzen-stakonmed-7435755.jpg?v=1772274013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/orthovisc-t-1x-20-ml-plasmaconcept-ag-gelenkspritzen-stakonmed-3220583.jpg?v=1772274013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/orthovisc-t-1-x-2-ml?variant=47355879915860\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":69.0,"price":49.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Plasmaconcept AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 30 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"12907627"}
{"item_group_id":8748731728212,"aid":47355879981396,"name":"Ostenil 1x 2.0 ml","brand":"TRB Chemedica AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Ostenil","tags":"8761939,cat_Gelenkspritzen,cat_Ostenil,TRB Chemedica AG","mpnr":"127","desc":"OSTENIL®Sodium hyaluronate 1.0%. Viscous-elastic solution for injection into the joint space to improve mobility and relieve pain in osteoarthritis. Transparent solution made from natural, highly purified sodium hyaluronate obtained by fermentation. Free of animal proteins. Sterilized with moist heat. The contents and the outer surface of the OSTENIL® prefilled syringe are sterile as long as the sterile barrier is intact. For single use only.Composition:1 ml isotonic solution (pH 7) contains 10.0 mg sodium hyaluronate, sodium chloride, disodium phosphate, sodium dihydrogen phosphate, and water for injection purposes.Indications:Pain and limited mobility of the knee and other large synovial joints such as hip and shoulder.Contraindications:OSTENIL® must not be administered to patients with known hypersensitivity to any of the components of the product.Precautions: ®Treatment with OSTENIL is not recommended for children, pregnant or breastfeeding women, or in inflammatory joint diseases such as rheumatoid arthritis or ankylosing spondylitis. If a joint effusion is present, it should be reduced first. National guidelines for intra-articular injections must be followed, including thorough disinfection of the injection site and other measures to prevent joint infections. OSTENIL® should be injected precisely into the joint space, if necessary under imaging guidance. Avoid injections into blood vessels or surrounding tissue. Do not use if the prefilled syringe or sterile packaging is damaged. Any solution not used immediately after opening must be discarded. Otherwise, sterility cannot be guaranteed, which may pose an infection risk. Do not resterilize as this may damage the product. There is currently no information on interference with diagnostic procedures such as MRI, clinical assessments, or therapeutic treatments by OSTENIL®.Interactions: ® There is currently no information on incompatibility of OSTENIL with other medical devices and drugs for intra-articular use or with oral analgesics or anti-inflammatory drugs.Side effects:In very rare cases (less than 1 in 10,000 patients), local reactions such as pain, warmth, redness, swelling\/joint effusion, itching, and other local intolerance reactions may occur during or after injection of OSTENIL®. As with all invasive joint treatments, infection may occur in very rare cases. It cannot be completely excluded that in very rare cases the intra-articular injection itself causes systemic side effects such as tachycardia, hypotension, hypertension, palpitations, nausea, and shortness of breath. These reactions may occur independently of the solution administered. Patients should be informed about contraindications and side effects before injection of OSTENIL®.Reporting of side effects:Any serious incident related to the medical device must be reported to the manufacturer TRB Chemedica AG and the responsible local authority of the user.Dosage and administration:Inject OSTENIL® 3–5 times at weekly intervals into the affected joint. Multiple joints can be treated simultaneously. Depending on the severity of the joint disease, the positive effect of a treatment cycle of five intra-articular injections can last at least six months. If necessary, the treatment cycle can be repeated. Remove the prefilled syringe from the sterile packaging, remove the Luer Lock cap from the syringe, attach a suitable needle with Luer connection (e.g., 18 to 25 G) and lock it by slight rotation. Remove any air bubbles from the syringe before injection.Disposal:Dispose of the syringe immediately after use in an appropriate safety container. Do not dispose of the OSTENIL® prefilled syringe in household waste. Follow local regulations for proper disposal of the safety container.Properties and mode of action:Synovial fluid, which behaves viscoelastically due to the presence of hyaluronic acid, is found in all synovial joints where it ensures normal, pain-free movement because of its lubricating and cushioning prop...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-1x-20-ml-trb-chemedica-ag-gelenkspritzen-stakonmed-2970669.jpg?v=1777230014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-1x-20-ml-trb-chemedica-ag-gelenkspritzen-stakonmed-5804675.jpg?v=1777230013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-1x-20-ml-trb-chemedica-ag-gelenkspritzen-stakonmed-3491850.jpg?v=1777230015\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/ostenil-1-x-2-ml?variant=47355879981396\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":51.37,"price":20.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"TRB Chemedica AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674313843028","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"8761939"}
{"item_group_id":8748731695444,"aid":47355879948628,"name":"Ostenil mini 1x 1.0 ml","brand":"TRB Chemedica AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Ostenil","tags":"1827233,cat_Gelenkspritzen,cat_Ostenil,TRB Chemedica AG","mpnr":"126","desc":"OSTENIL® MINISodium hyaluronate 1.0%. Viscous-elastic solution for injection into small joints to improve mobility and relieve pain in osteoarthritis. Transparent solution made from natural, highly purified sodium hyaluronate obtained by fermentation. Free from animal proteins. Sterilized with moist heat. The content and the outer surface of the OSTENIL® MINI prefilled syringe are sterile as long as the sterile barrier is intact. For single use only.Composition:1 ml isotonic solution (pH 7) contains 10.0 mg sodium hyaluronate, sodium chloride, disodium phosphate, sodium dihydrogen phosphate, and water for injection purposes.Indications:Pain and limited mobility due to degenerative and traumatic changes in small synovial joints, e.g., facet joints of the lumbar spine, thumb saddle joint, proximal joint of the big toe, and temporomandibular joint.Contraindications:OSTENIL® MINI must not be administered to patients with known hypersensitivity to any of the components of the product.Precautions:Treatment with OSTENIL® MINI is not recommended for children, pregnant or breastfeeding women, or patients with inflammatory joint diseases such as rheumatoid arthritis or ankylosing spondylitis. If a joint effusion is present, it should be reduced first. National guidelines for intra-articular injections must be followed, including thorough disinfection of the injection site and other measures to prevent joint infections. OSTENIL® MINI should, if necessary under imaging guidance, be injected precisely into the joint space. Avoid injections into blood vessels or surrounding tissue. Do not use if the prefilled syringe or sterile packaging is damaged. Any solution not used immediately after opening must be discarded. Otherwise, sterility cannot be guaranteed, which may increase the risk of infection. Do not resterilize, as this may damage the product. There is currently no information on interference with diagnostic procedures such as MRI, clinical assessments, or therapeutic treatments by OSTENIL® MINI.Interactions: There is currently no information on incompatibility of OSTENIL® MINI with other medical devices and drugs for intra-articular use or with oral analgesics or anti-inflammatory drugs.Side effects:In very rare cases (less than 1 in 10,000 patients), local reactions such as pain, warmth, redness, swelling\/joint effusion, and tachycardia (rapid heartbeat) may occur during or after injection of OSTENIL® MINI. As with all invasive joint treatments, infection may occur in very rare cases. Patients should be informed about contraindications and side effects before injection of OSTENIL® MINI.Reporting side effects:Any serious incident related to the medical device must be reported to the manufacturer TRB CHEMEDICA AG and the responsible local authority of the user.Dosage and administration:Inject OSTENIL® MINI 1 to 3 times at weekly intervals into the affected joint. Multiple joints can be treated simultaneously. Depending on the severity of the joint disease, the positive effect of a treatment cycle of three intra-articular injections can last at least six months. Sodium hyaluronate itself is broken down within a few days. If necessary, the treatment cycle can be repeated. Remove the prefilled syringe from the sterile packaging, remove the Luer Lock cap from the syringe, attach a suitable needle with Luer connection (e.g., 18 to 25 G), and lock it by slight rotation. Remove any air bubbles from the syringe before injection.Disposal:Dispose of the syringe immediately after use in an appropriate safety container. Do not dispose of the OSTENIL® MINI prefilled syringe in household waste. Follow local regulations for proper disposal of the safety container.Properties and mode of action:Synovial fluid, which behaves viscoelastically due to the presence of hyaluronic acid, is found in all synovial joints, where it ensures normal, pain-free movement due to its lubricating and cushioning properties. In degenerative joint diseases such as osteo...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-mini-1x-10-ml-mhd-30042026-trb-chemedica-ag-gelenkspritzen-stakonmed-7803995.jpg?v=1777230014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-mini-1x-10-ml-mhd-30042026-trb-chemedica-ag-gelenkspritzen-stakonmed-5531805.jpg?v=1777230013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-mini-1x-10-ml-mhd-30042026-trb-chemedica-ag-gelenkspritzen-stakonmed-4926868.jpg?v=1777230015\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/ostenil-mini-1-x-1-ml?variant=47355879948628\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":34.22,"price":19.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"TRB Chemedica AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 10 mg \/ 1 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674306306388","meta_packungsgr_e":"1 Fertigspritze a 1 ml","meta_pzn":"1827233"}
{"item_group_id":8748731760980,"aid":47355880014164,"name":"Ostenil Plus 1x 2.0 ml","brand":"TRB Chemedica AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Ostenil","tags":"7224671,cat_Gelenkspritzen,cat_Ostenil,TRB Chemedica AG","mpnr":"128","desc":"OSTENIL® PLUSSodium hyaluronate 2.0%. A viscoelastic solution for injection into the joint space to improve mobility and relieve pain in osteoarthritis. Transparent solution made from natural, highly purified sodium hyaluronate obtained by fermentation. Free from animal proteins. Sterilized with moist heat. The contents and the outer surface of the OSTENIL® PLUS prefilled syringe are sterile as long as the sterile barrier is intact. For single use only.Composition:1 ml isotonic solution (pH 7) contains 20.0 mg sodium hyaluronate, sodium chloride, disodium phosphate, sodium dihydrogen phosphate, mannitol, and water for injection purposes.Indications:Pain and restricted mobility of the knee and other large synovial joints such as hip and shoulder.Contraindications:OSTENIL® PLUS must not be administered to patients with known hypersensitivity to any of the components of the product.Precautions:Treatment with OSTENIL® PLUS is not recommended for children, pregnant or breastfeeding women, or in inflammatory joint diseases such as rheumatoid arthritis or ankylosing spondylitis. If a joint effusion is present, it should be reduced first. National guidelines for intra-articular injections must be followed, including thorough disinfection of the injection site and other measures to prevent joint infections. OSTENIL® PLUS should be injected precisely into the joint space, if necessary under imaging guidance. Avoid injections into blood vessels or surrounding tissue. Do not use if the prefilled syringe or sterile packaging is damaged. Any solution not used immediately after opening must be discarded. Otherwise, sterility cannot be guaranteed, which may pose an infection risk. Do not resterilize, as this may damage the product. There is currently no information on impairment of diagnostic procedures such as MRI, clinical assessments, or therapeutic treatments by OSTENIL® PLUS.Interactions: There is currently no information on incompatibility of OSTENIL® PLUS with other medical devices and drugs for intra-articular use or with oral analgesics or anti-inflammatory drugs.Side effects:In very rare cases (less than 1 in 10,000 patients), local reactions such as pain, warmth, redness, swelling\/joint effusion, itching, and other local intolerance reactions may occur during or after injection of OSTENIL® PLUS. As with all invasive joint treatments, infection may occur in very rare cases. It cannot be completely excluded that in very rare cases the intra-articular injection itself causes systemic side effects such as tachycardia, hypotension, hypertension, palpitations, nausea, and shortness of breath. These reactions may occur independently of the applied solution. Patients should be informed about contraindications and side effects before injection of OSTENIL® PLUS.Reporting of side effects:Any serious incident related to the medical device must be reported to the manufacturer TRB Chemedica AG and the responsible local authority of the user.Dosage and administration:Inject OSTENIL® PLUS a total of 1 to 3 times at weekly intervals into the affected joint. Multiple joints can be treated simultaneously. Depending on the severity of the joint disease, the positive effect can last at least six months. If necessary, the treatment cycle can be repeated. Remove the prefilled syringe from the sterile packaging, remove the Luer Lock cap from the syringe, attach a suitable needle with Luer connection (e.g., 18 to 25 G) and lock it by slight rotation. Remove any air bubbles from the syringe before injection.Disposal:Dispose of the syringe immediately after use in an appropriate safety container. Do not dispose of the OSTENIL® PLUS prefilled syringe in household waste. Follow local regulations for proper disposal of the safety container.Properties and mode of action:Synovial fluid, which behaves viscoelastically due to the presence of hyaluronic acid, is found in all synovial joints, where it ensures normal, pain-free movement due to its lubricating and c...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-plus-trb-chemedica-ag-gelenkspritzen-stakonmed-821548.jpg?v=1772215064\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-plus-trb-chemedica-ag-gelenkspritzen-stakonmed-410029.jpg?v=1772215064\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-plus-trb-chemedica-ag-gelenkspritzen-stakonmed-449368.jpg?v=1772215064\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/ostenil-plus-1-x-2-ml?variant=47355880014164\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":94.33,"price":57.85,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"TRB Chemedica AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 40 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674319446356","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"7224671"}
{"item_group_id":8748731859284,"aid":47355880046932,"name":"Ostenil Tendon 1x 2.0 ml","brand":"TRB Chemedica AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Ostenil","tags":"9440404,cat_Gelenkspritzen,cat_Ostenil,TRB Chemedica AG","mpnr":"129","desc":"OSTENIL® TENDONSodium hyaluronate 2.0%. Viscoelastic solution for peritendinous injection or injection into the tendon sheath to improve mobility and relieve pain in tendon disorders. Transparent solution made from natural, highly purified sodium hyaluronate obtained by fermentation. Free of animal proteins. Sterilized with moist heat. The content and the outer surface of the OSTENIL® TENDON prefilled syringe are sterile as long as the sterile barrier is intact. For single use only.Composition:1 ml isotonic solution (pH 7) contains 20.0 mg sodium hyaluronate, sodium chloride, disodium phosphate, sodium dihydrogen phosphate, mannitol, and water for injection purposes.Indications:For the treatment of pain and restricted mobility of tendons with or without involvement of the tendon sheath such as Achilles tendon, tendon at the humeral epicondyle, supraspinatus, patella, peroneal, biceps tendon, as well as iliotibial band.Contraindications:OSTENIL® TENDON must not be administered to patients with known hypersensitivity to any of the components of the product.Precautions:The use of OSTENIL® TENDON in children, pregnant and breastfeeding women, as well as in acute injuries, is not recommended. The general precautions for peritendinous injections and injections into the tendon sheath, including thorough disinfection of the injection site and other measures to prevent infections, must be observed. OSTENIL® TENDON must be correctly injected into the tendon sheath or correctly injected around the affected tendon, if necessary under imaging guidance. Avoid nerve injuries and injections into blood vessels. Do not use if the prefilled syringe or sterile packaging is damaged. Any solution not used immediately after opening must be discarded. Otherwise, sterility can no longer be guaranteed, which may be associated with a risk of infection. Do not resterilize as this may damage the product. There is currently no information on impairment of diagnostic examinations such as magnetic resonance imaging, clinical assessments, or therapeutic treatments by OSTENIL® TENDON.Interactions:There is currently no information available on incompatibility of OSTENIL® TENDON with other medical devices and drugs applied to the tendon.Side effects:In very rare cases (in fewer than 1 in 10,000 patients), local side effects such as discomfort, pain, warmth, itching, bruising, redness, and swelling may occur after the use of OSTENIL® TENDON. As with all invasive treatments, infection may occur in very rare cases. Patients should be informed about contraindications and side effects before injection of OSTENIL® TENDON.Reporting of side effects:Any serious incident related to the medical device must be reported to the manufacturer TRB CHEMEDICA AG and the responsible local authority of the user.Dosage and method of administration:Inject OSTENIL® TENDON twice in total at weekly intervals around the affected tendon or into the affected tendon sheath. Multiple tendons can be treated simultaneously. Clinical studies showed a reduction in pain and improvement in mobility for up to twelve months. Sodium hyaluronate itself is broken down within a few days. Repeat treatment cycles are possible if needed. Remove the prefilled syringe from the sterile packaging, remove the Luer-Lock cap from the syringe, attach a suitable needle with Luer connection (e.g., 25 to 27 G) and lock it by slight rotation. Remove any air bubbles from the syringe before injection.Disposal:Dispose of the syringe immediately after use in an appropriate safety container. Do not dispose of the OSTENIL® TENDON prefilled syringe in household waste. Follow local regulations for proper disposal of the safety container.Properties and mode of action:A tendon is a robust structure made of fibrous connective tissue designed to transmit forces from muscles to bones and withstand tension during muscle contraction. Tendons can be surrounded by different structures: fibrous ligaments, synovial sheaths, tendon she...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-tendon-trb-chemedica-ag-gelenkspritzen-stakonmed-774631.jpg?v=1772215089\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-tendon-trb-chemedica-ag-gelenkspritzen-stakonmed-470558.jpg?v=1772215089\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/ostenil-tendon-trb-chemedica-ag-gelenkspritzen-stakonmed-456233.jpg?v=1772215089\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/ostenil-tendon-1-x-2-ml?variant=47355880046932\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":94.33,"price":56.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"TRB Chemedica AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 40 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674327146836","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"9440404"}
{"item_group_id":12399060058452,"aid":53070049149268,"name":"Osteodens (120 capsules)","brand":"ReviMed GmbH","product_type":"Supplements","shop_cat":"Supplements","tags":"cat_Supplements","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/osteodens-120-kapseln-revimed-gmbh-supplements-stakonmed-6599792.jpg?v=1770865392\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/osteodens-120-kapseln-revimed-gmbh-supplements-stakonmed-5062328.jpg?v=1770865393\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/osteodens-126g-120kapseln?variant=53070049149268\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":37.9,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ReviMed GmbH","meta_darreichungsform":"Nahrungsergänzungsmittel","meta_detail":"Mit Maitake Extrakt, Korallencalcium Pulver und Inulin.","meta_packungsgr_e":"120 Kapseln \/ 126g"}
{"item_group_id":11997533864276,"aid":51849671967060,"name":"PhilArt 1x 2.0 ml","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Philart","tags":"cat_Filler,cat_Philart,Croma-Pharma GmbH","mpnr":"230","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-3752173.jpg?v=1772274019\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-3037430.jpg?v=1772274019\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-7843386.jpg?v=1772274019\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/philart?variant=51849671967060\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":111.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57235570557268","meta_packungsgr_e":"1 Fertigspritze a 2 ml"}
{"item_group_id":11997540450644,"aid":51849688973652,"name":"PhilArt Eye 1x 2.0 ml  (MHD 30.06.2026)","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Philart","tags":"cat_Filler,cat_Philart,Croma-Pharma GmbH","mpnr":"231","desc":"Croma® PolyPhil EyeCroma® PolyPhil Eye is an injectable polynucleotide formulation designed to specifically improve skin quality in the sensitive eye area. The product was developed to revitalize tired-looking eye areas and support the structure and elasticity of the periocular skin.Due to the low concentration of polynucleotides, cell regeneration is stimulated long-term, making the skin appear fresher, smoother, and less tired. PolyPhil Eye is suitable for both preventive use and treatment of mature skin and can also be used to prepare for further aesthetic procedures.Treatment areasEye contourEyebrow archesSensitive and delicate skin areasProduct featuresPromotion of cell regeneration to improve skin texture, fine lines, and dark circlesStimulation of collagen and elastin production to support skin elasticityIntensive and long-lasting hydration of the eye areaSoothing properties with potential reduction of redness and swellingGood tolerability and low risk of side effectsSuitable for combination with other aesthetic treatmentsTreatment protocol and injection technique1–2 ml per sessionTreatment interval: every 14 or 21 daysA total of 3–4 sessions recommendedInjection using multipoint technique (spacing 0.5–1 cm) or linear retrogradeProduct line PolyPhilPolyPhil products focus on improving skin quality as the foundation of aesthetic treatments. Polynucleotides promote cell regeneration, support collagen and elastin synthesis, and contribute to a more even, vital skin texture. Optimized skin quality can positively influence the results of subsequent aesthetic procedures such as hyaluronic acid injections, peels, or laser treatments.GPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Mastelli S.r.lAddress: Via Bussana Vecchia 32, 18038 Sanremo, ItalyE-Mail: businessdevelopment@mastelli.itWebsite: https:\/\/www.mastelli.com\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-eye-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-3074437.jpg?v=1772274016\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-eye-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-3458678.jpg?v=1772274016\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-eye-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-4814158.jpg?v=1772274016\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/philart-eye?variant=51849688973652\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":117.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57235587137876","meta_packungsgr_e":"1 Fertigspritze a 2 ml"}
{"item_group_id":11997541826900,"aid":51849691595092,"name":"PhilArt Hair 1x 2.0 ml  (MHD 31.05.2026)","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Philart","tags":"cat_Filler,cat_Philart,Croma-Pharma GmbH","mpnr":"232","desc":"Croma® PolyPhil HairCroma® PolyPhil Hair is an injectable polynucleotide formulation to support hair growth and improve hair quality. The product is suitable for use on the scalp as well as on the face, for example for treating the eyebrows.PolyPhil Hair is applied intradermally using a multipoint technique and can be used both independently and as a complement, for example after a hair transplant. The formulation is especially suitable for patients with sensitive skin as well as for hormone-related hair loss. Additionally, PolyPhil Hair can be well combined with other therapies such as biotin, hyaluronic acid, carboxytherapy, or topical treatments.Treatment areasScalpEyebrow archesSensitive and delicate skin areasProduct featuresPolynucleotide-based formulation to stimulate hair growthSupport of hair follicles and improvement of hair structureContribution to increasing hair density, strength, and shineMinimally invasive application with direct injection into the scalpLong-lasting results that can develop over several monthsTreatment protocol and injection technique2 ml per treatmentInitial phase: one treatment every 7 or 14 days for a total of 4 sessionsThen: one treatment every 21 days for 4 more sessionsInjection using multipoint techniquePolyPhil product linePolyPhil products aim for the sustainable improvement of skin and tissue quality. Polynucleotides promote cell regeneration, support collagen and elastin synthesis, and contribute to optimizing tissue structure. Improved skin and tissue quality can positively influence the effectiveness of complementary aesthetic treatments and contribute to more stable results.GPSR informationGeneral informationCE marking: YesManufacturer informationName: Mastelli S.r.lAddress: Via Bussana Vecchia 32, 18038 Sanremo, ItalyE-Mail: businessdevelopment@mastelli.itWebsite: https:\/\/www.mastelli.com\/European manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-hair-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-6437188.jpg?v=1772274014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-hair-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-7488926.jpg?v=1772274013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-hair-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-4443851.jpg?v=1772274014\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/philart-hair?variant=51849691595092\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":117.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57235598213460","meta_packungsgr_e":"1 Fertigspritze a 2 ml"}
{"item_group_id":11997543006548,"aid":51849693921620,"name":"PhilArt Next 1x 2.0 ml  (MHD 30.06.2026)","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Philart","tags":"cat_Filler,cat_Philart,Croma-Pharma GmbH","mpnr":"233","desc":"Croma® PolyPhil NextCroma® PolyPhil Next is an injectable formulation for comprehensive improvement of skin quality and skin rejuvenation. The product is suitable for use on the face, neck, décolleté, and hands. The combination of non-crosslinked hyaluronic acid and polynucleotides supports long-lasting skin hydration and contributes to a fresh, radiant appearance.Additionally, PolyPhil Next promotes fibroblast regeneration and sustainably supports skin elasticity and firmness. The preparation can also be used to model sunken scars and stretch marks. PolyPhil Next is suitable both for standalone treatments and as a preparatory measure before further aesthetic or surgical procedures.Treatment areasFace (including tear troughs)Neck and décolletéHandsProduct featuresImproves skin quality through the use of polynucleotidesSupports cell regeneration and delays cellular degradation processesStimulation of collagen and elastin production through fibroblast activationEffective and long-lasting tissue hydrationContributes to increased skin elasticity and visible skin rejuvenationTreatment protocol and injection technique2 ml per treatmentTreatment interval: every 14 or 21 days3 sessions for normal skin4 sessions for advanced skin agingInjection using multipoint or linear retrograde techniqueProduct line PolyPhilPolyPhil products focus on optimizing skin quality as the foundation for aesthetic results. Polynucleotides promote cell regeneration, support collagen and elastin synthesis, and improve skin texture and radiance. Well-prepared skin can positively influence the results of subsequent aesthetic treatments such as hyaluronic acid injections, chemical peels, or laser therapies.GPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Mastelli S.r.lAddress: Via Bussana Vecchia 32, 18038 Sanremo, ItalyEmail: businessdevelopment@mastelli.itWebsite: https:\/\/www.mastelli.com\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-next-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-1632851.jpg?v=1772274014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-next-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-1476456.jpg?v=1772274013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/philart-next-1x-20-ml-croma-pharma-gmbh-filler-stakonmed-9072155.jpg?v=1772274013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/philart-next?variant=51849693921620\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":128.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57235610009940","meta_packungsgr_e":"1 Fertigspritze a 2 ml"}
{"item_group_id":11997545365844,"aid":51849696837972,"name":"Profhilo H+L 1x 2.0 ml","brand":"IBSA","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Profhilo","tags":"cat_Filler,cat_Profhilo,IBSA","mpnr":"234","desc":"Profhilo® H+LProfhilo® H+L is an injectable hyaluronic acid preparation for intensive hydration and revitalization of tired, sagging skin. The hyaluronic acid remains in the tissue for several weeks, continuously and long-lastingly supplying the skin with moisture during this time. The result is smoother, more supple skin with improved elasticity.Through an innovative manufacturing process, high- and low-molecular-weight hyaluronic acid are combined into a stable hybrid complex. This results in a highly purified hyaluronic acid with a very high concentration of a total of 64 mg per 2 ml.Treatment AreasFaceNeckDécolletéArmsProduct FeaturesHighly pure hyaluronic acid with pronounced water-binding effect for intensive skin hydrationCombination of high- and low-molecular-weight hyaluronic acid in a stable hybrid complexIndependent tissue distribution through special injection technique with defined injection pointsLonger residence time in tissue compared to non-crosslinked hyaluronic acidVery high hyaluronic acid concentration of 32 mg\/mlGPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: IBSA Farmaceutici Italia srlAddress: Via Martiri di Cefalonia 2, 26900 Lodi, ItalyE-Mail: info@ibsaderma.comWebsite: https:\/\/www.ibsa.it\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/profhilo-hl-1x-20-ml-ibsa-filler-stakonmed-3030929.jpg?v=1772274023\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/profhilo-hl-1x-20-ml-ibsa-filler-stakonmed-6913379.jpg?v=1772274024\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/profhilo-hl-1x-20-ml-ibsa-filler-stakonmed-4930673.jpg?v=1772274023\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/profhilo?variant=51849696837972\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":87.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"IBSA","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57235637240148","meta_packungsgr_e":"1 Fertigspritze a 2 ml"}
{"item_group_id":8748734775636,"aid":47355895644500,"name":"Radiesse 1x 1.5 ml","brand":"MERZ Pharmaceuticals GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Radiesse","tags":"cat_Filler,cat_Radiesse,MERZ Pharmaceuticals GmbH","mpnr":"236","desc":"Radiesse®Radiesse® is a collagen-biostimulating dermal filler for restoring volume, contour definition, and sustainably improving skin quality. The product can be used on the face as well as on the hands and supports a fresher, younger appearance.By specifically stimulating the body's own collagen and elastin production, Radiesse® not only provides immediate structural support but also contributes to long-term tightening and firming of the skin.Treatment AreasFaceHandsProduct FeaturesCollagen-biostimulating dermal filler with a triple effect: lifting, contour definition, and improvement of skin qualityStimulation of the body's own cells to form a natural collagen networkSustainable tightening of facial contours and long-term strengthening of skin structureGood moldability for harmonious, soft transitions and a youthful V-effectManufacturer ProfileMerz Aesthetics® is part of the family-owned company Merz, founded in 1908 in Frankfurt am Main. Since the 1950s, the name Merz has stood for innovations in the field of medical aesthetics. Today, Merz Aesthetics® is one of the world’s leading providers of aesthetic medical products.GPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Merz North America IncAddress: 4133 Courtney St., Suite 10, Franksville, WI 53126, USAE-mail: mymerzsolutions@merz.comWebsite: https:\/\/www.merz.com\/European manufacturer: NoResponsible PersonName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressumImporter InformationName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyE-mail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressum","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/radiesse-15-merz-pharmaceuticals-gmbh-filler-stakonmed-439715.jpg?v=1772215254\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/radiesse-15-merz-pharmaceuticals-gmbh-filler-stakonmed-429584.jpg?v=1772215254\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/radiesse-15-merz-pharmaceuticals-gmbh-filler-stakonmed-894422.jpg?v=1772215248\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/radiesse-1-5-1-x-1-5-ml?variant=47355895644500\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":179.0,"price":129.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"MERZ Pharmaceuticals GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1,5 ml"}
{"item_group_id":8748734808404,"aid":47355895677268,"name":"Radiesse Lidocaine 1x 1.5 ml","brand":"MERZ Pharmaceuticals GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Radiesse","tags":"cat_Filler,cat_Radiesse,MERZ Pharmaceuticals GmbH","mpnr":"237","desc":"Radiesse® LidocaineRadiesse® Lidocaine is a collagen-stimulating dermal filler designed to restore volume, define contours, and sustainably improve skin quality. The product can be used on the face as well as the hands, supporting a fresher, younger appearance.By stimulating the body's own collagen and elastin production, Radiesse® Lidocaine not only adds volume but also contributes to long-term tightening and firming of the skin structure. The addition of lidocaine allows for a comfortable and largely painless injection.Treatment AreasFaceHandsProduct FeaturesCollagen-stimulating dermal filler with a triple effect: lifting, contour definition, and skin quality improvementStimulation of the body's own cells to form a natural collagen networkSustainable tightening of facial contours and long-term strengthening of skin structureGood moldability for harmonious, soft transitions and a youthful V-effectComfortable application thanks to included lidocaineManufacturer ProfileMerz Aesthetics® is part of the family-owned company Merz, founded in 1908 in Frankfurt am Main. Since the 1950s, the name Merz has stood for innovations in medical aesthetics. Today, Merz Aesthetics® is one of the world’s leading providers of aesthetic medical products.GPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Merz North America IncAddress: 4133 Courtney St., Suite 10, Franksville, WI 53126, USAEmail: mymerzsolutions@merz.comWebsite: https:\/\/www.merz.com\/European manufacturer: NoResponsible PersonName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyEmail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressumImporter InformationName: Merz Aesthetics GmbHAddress: Eckenheimer Landstraße 100, 60318 Frankfurt am Main, GermanyEmail: tom.grathwohl@merz.deWebsite: https:\/\/mmp.merz-aesthetics.de\/impressum","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/radiesse-15-mit-lidocaine-merz-pharmaceuticals-gmbh-filler-stakonmed-769287.jpg?v=1771098824\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/radiesse-15-mit-lidocaine-merz-pharmaceuticals-gmbh-filler-stakonmed-705944.jpg?v=1771098824\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/radiesse-15-mit-lidocaine-merz-pharmaceuticals-gmbh-filler-stakonmed-916838.jpg?v=1771098809\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/radiesse-1-5-mit-lidocaine-1-x-1-5-ml?variant=47355895677268\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":179.0,"price":130.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"MERZ Pharmaceuticals GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1,5 ml"}
{"item_group_id":8748731957588,"aid":47355880571220,"name":"Recosyn 20 1x 2.0 ml","brand":"Recordati Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Recosyn","tags":"5484439,cat_Gelenkspritzen,cat_Recosyn,Recordati Pharma GmbH","mpnr":"131","desc":"RECOSYN®1. Intended UseThis product is a medical device for use in humans and is injected intra-articularly into the knee joint. The medical device is intended to reduce functional limitations, relieve pain, and consequently improve quality of life.2. IndicationsIndicated for patients with symptomatic femorotibial knee osteoarthritis.3. DescriptionThe product consists of a sterile, isotonic, viscoelastic solution for intra-articular use and is supplied in a prefilled syringe. Each prefilled syringe contains 2 ml of the viscoelastic solution. 1 ml of the product contains: 10 mg (1%) sodium hyaluronate as well as sodium chloride, sodium monohydrogen phosphate, citric acid, and water for injection purposes. The product is supplied sterile and is intended for single use only. The product is steam sterilized in its blister packaging. No ingredients or raw materials of animal origin are used in the manufacture of the product. The product contains no medicinal active substances.4. Method of Administration and DosageRemove the prefilled syringe from the blister and carefully unscrew the rubber cap from the Luer-Lock connector. For intra-articular injections, a 21G cannula is recommended. Attach the cannula to the Luer-Lock connector and lock it with a slight twist. Hold the syringe during administration as shown in Figure 1. It is recommended to administer three injections of 2 ml of the product per knee at weekly intervals. Both knee joints can be treated simultaneously, and treatment cycles of up to 3 injections can be repeated. To avoid intra-articular infections, the injection must be performed under strict aseptic conditions. It is recommended to apply an ice pack to the treated joint for 5–10 minutes after application to prevent pain, swelling, and bleeding.5. Properties and Mode of ActionIn patients with degenerative joint disease (osteoarthritis), the viscoelasticity of the synovial fluid is significantly impaired. Mechanical stress on the joint leads to the breakdown of joint cartilage, which in turn causes restricted joint mobility and pain. The lubricating properties of this product contribute to pain reduction and improved joint mobility. The effect of the product lasts up to 6 months after a treatment cycle of 3 intra-articular injections.6. Contraindications and Possible InteractionsThe product must not be used in the following patients:Patients with hemochromatosis, ochronosis, or hemophilia | Patients with Paget's disease of bone, chondromatosis, or pigmented villonodular synovitis | Patients with inflammatory, infectious, or metabolic arthritis (rheumatoid arthritis, ankylosing spondylitis, soft tissue rheumatism...) | Patients with a history of coagulation disorders or on anticoagulant therapy | Patients with known allergy to the product or any of its components | Patients requiring permanent or intermittent steroid therapy | Patients with immunodeficiency or with severe or progressive disease (cardiac, pulmonary, hepatic, renal, hematological, neoplastic, or infectious disease) | Patients with venous stasis or lymphostasis in the target limb | Patients with skin diseases or infections at the injection site | Patients with a severe acute or chronic illness for which the use of the product is contraindicated or poses an additional risk according to the physician's assessmentCurrently, no information is available on undesirable interactions with other intra-articularly administered therapies.7. Side Effects and Adverse EventsThe physician must inform the patient about potential side effects and\/or incompatibilities related to the use of this product, which may occur immediately or some time after the injection. After application, local symptoms may occur in the treated joint (pain, warmth, redness, and swelling). In connection with comparable products, the following adverse events have been reported: mild to moderate joint pain, rarely skin rash, pseudo-septic joint effusions, pruritus, and muscle cramps. In very ra...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-20-recordati-pharma-gmbh-gelenkspritzen-stakonmed-263726.jpg?v=1772215288\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-20-recordati-pharma-gmbh-gelenkspritzen-stakonmed-159706.jpg?v=1772215288\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-20-recordati-pharma-gmbh-gelenkspritzen-stakonmed-436452.jpg?v=1772215283\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/recosyn-20-1-x-2-ml?variant=47355880571220\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":46.99,"price":22.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Recordati Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674357031252","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"5484439"}
{"item_group_id":8748731990356,"aid":47355880603988,"name":"Recosyn forte N 44 1x 2.0 ml","brand":"Recordati Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Recosyn","tags":"15382496,cat_Gelenkspritzen,cat_Recosyn,Recordati Pharma GmbH","mpnr":"132","desc":"Recosyn® forte NSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made from highly purified sodium hyaluronate obtained by bacterial fermentation without genetic modification, with high molecular weight, used to improve viscosity in intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.The product contains 1 ml aqueous, physiological phosphate buffer solution with 22 mg sodiumhyaluronate. The sodium hyaluronate hydrogel is in a weak, sterilelen, isotonic and apyrogenic phosphate-buffered saline solution with a pH of 7.2 (6.8 – 7.4) in sufficient volume for injection. The fill volume of a prefilled syringe is 2 ml.The chemical components are listed in the table on the right (weight per volume as mg substance per 1 ml hydrogel).Properties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The Recosyn® forte N contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophiliaor when using anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of the treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered precisely into the joint cavity; injections into blood vessels and surrounding tissue must be avoided.Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single application session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. Local reactions such as pain, redness, warmth, and swelling may occur in the treated joint. These symptoms can be reduced by cooling the treated area with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. Treatment should be discontinued in case of severe pain or inflammation. Management of adverse reactions should only be carried out under the supervision of the treating physician. Immediately after the injection, strenuous physical activity should be avoided, and other instructions from the doctor should be followed.Medical professionals should inform the patient- about possible adverse events related to the product.- that the patient must inform a doctor of any adverse event or complication.Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and quaternary ammonium compounds such as benzalkonium chloride, which can lead to crystalline precipitation. Therefore, this product must never come into contact with surgical instruments or other products containing these compounds, or with solutions rinsed with quaternary ammonium compounds as biocidal preservatives.Remove the prefilled syringe from its packaging. Remove the protective ca...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-forte-n-44-recordati-pharma-gmbh-gelenkspritzen-stakonmed-710157.jpg?v=1772215311\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-forte-n-44-recordati-pharma-gmbh-gelenkspritzen-stakonmed-543192.jpg?v=1772215311\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-forte-n-44-recordati-pharma-gmbh-gelenkspritzen-stakonmed-665895.jpg?v=1772215311\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/recosyn-forte-n-44-1-x-2-ml?variant=47355880603988\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":83.99,"price":48.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Recordati Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 44 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674361651540","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"15382496"}
{"item_group_id":8748731924820,"aid":47355880538452,"name":"Recosyn m.d.N  1x 1.0 ml","brand":"Recordati Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Recosyn","tags":"15382527,cat_Gelenkspritzen,cat_Recosyn,Recordati Pharma GmbH","mpnr":"130","desc":"Recosyn® m.d. NSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made from highly purified sodium hyaluronate obtained by bacterial fermentation without genetic modifications, with high molecular weight, used to improve viscosity in intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.The product contains 1 ml aqueous, physiological phosphate buffer solution with 10 mg sodium hyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile len, isotonic and apyrogenic phosphate-buffered saline solution with a pH of 7.2 (6.8 – 7.4) in sufficient volume for injection. The fill volume of a prefilled syringe is 1 ml.The chemical components are listed in the table on the right (weight per volume as mg substance per 1 ml hydrogel).Properties and mode of actionEssential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The Recosyn® m.d. N contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the ingredients- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- with natural or medication-induced coagulation disorders such as hemophiliaor when using anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered precisely into the joint cavity; injections into blood vessels and surrounding tissue must be avoided.Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. Local reactions such as pain, redness, warmth, and swelling may occur in the treated joint. These symptoms can be reduced by cooling the treated area with an ice pack for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. If severe pain or inflammation occurs, treatment should be discontinued. Management of adverse reactions should only be carried out under the supervision of the treating physician. Immediately after the injection, strenuous physical activity should be avoided, and other instructions from the doctor should be followed.Medical professionals should inform the patient- about possible adverse events related to the product.- that the patient must inform a doctor of any adverse event or complication.Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and quaternary ammonium compounds such as benzalkonium chloride, which can lead to crystalline precipitation. Therefore, this product must never come into contact with surgical instruments or other products containing these compounds, or with solutions rinsed with quaternary ammonium compounds used as biocidal preservatives.Dosage, type, and duration of useRemove the prefilled syringe from its pack...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-md-n-recordati-pharma-gmbh-gelenkspritzen-stakonmed-883596.jpg?v=1772215360\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-md-n-recordati-pharma-gmbh-gelenkspritzen-stakonmed-887423.jpg?v=1772215360\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-md-n-recordati-pharma-gmbh-gelenkspritzen-stakonmed-646042.jpg?v=1772215360\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/recosyn-m-d-n-1-x-1-ml?variant=47355880538452\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":30.02,"price":21.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Recordati Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 10 mg \/ 1 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674346611028","meta_packungsgr_e":"1 Fertigspritze a 1 ml","meta_pzn":"15382527"}
{"item_group_id":8748732088660,"aid":47355880997204,"name":"Recosyn Max forte N 1x 2.0 ml","brand":"Recordati Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Recosyn","tags":"18489970,cat_Gelenkspritzen,cat_Recosyn,Recordati Pharma GmbH","mpnr":"134","desc":"Recosyn® Max forte NSodium hyaluronate intra-articular plus niacinamideDescriptionThe prefilled syringe contains a hydrogel made of high-molecular and highly purified sodium hyaluronate from bacterial fermentation. The product serves to improve viscosity in the intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.Recosyn® Max forte N contains 2 ml aqueous, physiological phosphate buffer solution with 44 mg sodium hyaluronate. The sodium hyaluronate hydrogel is contained in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH of 7.2 (6.8 – 7.4) in sufficient volume for injection. The fill volume is 2 ml.The chemical components are listed in the table (weight per volume as mg substance per 1 ml hydrogel):(a) Sodium hyaluronate, (b) Sodium chloride, (c) Disodium hydrogen phosphate 2 H2O,(d) Sodium dihydrogen phosphate 2 H2O, (e) Water for injection, (f) NiacinamideProperties and mode of actionHyaluronic acid, a widespread glycosaminoglycan, is an essential component healthy synovial fluid. This natural biopolymer provides viscoelasticity andenables pain-free physiological movements thanks to its lubricating, shock-absorbing properties. Additionally, it supplies nutrients to the cartilage. The Recosyn® Max forte N contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components.- with inflammation in the joint.- with septic arthritis.- with skin infections or skin diseases in the injection area.- with natural or medication-induced coagulation disorders such as hemophilia or when using anticoagulants like Marcumar (phenprocoumon) or Coumadin (warfarin).Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of the treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered directly into the joint cavity; injections into blood vessels and surrounding tissue must be avoided.Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single application session.Possible side effectsNo adverse side effects were observed in biocompatibility tests with the product. Local reactions such as pain, redness, warmth, and swelling may occur at the treated joint. These reactions can be reduced by cooling the treated area with an ice pack for 5 to 10 minutes after the injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. Treatment should be discontinued in case of severe pain or inflammation. Management of adverse reactions should only be carried out under the supervision of the treating physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the doctor followed.Medical personnel inform the patient about possible adverse events related to the product and advise that any side effect or complication must be reported to a doctor immediately.Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and quaternary ammonium compounds such as benzalkonium chloride, which can lead to crystalline precipitation. Therefore, this product must never come into contact with surgical instruments or other products that contain these or have been rinsed with solutions conta...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-max-forte-n-recordati-pharma-gmbh-gelenkspritzen-stakonmed-544861.jpg?v=1772215337\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-max-forte-n-recordati-pharma-gmbh-gelenkspritzen-stakonmed-912397.jpg?v=1772215337\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-max-forte-n-recordati-pharma-gmbh-gelenkspritzen-stakonmed-125786.jpg?v=1772215337\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/recosyn-max-forte-n-1-x-2-ml?variant=47355880997204\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":119.0,"price":94.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Recordati Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 44 mg \/ 2 ml  +  30 mg Niacinamid","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674375938388","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"18489970"}
{"item_group_id":8748732055892,"aid":47355880964436,"name":"Recosyn Uno Ultra 1x 4.8 ml","brand":"Recordati Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Recosyn","tags":"13358298,cat_Gelenkspritzen,cat_Recosyn,Recordati Pharma GmbH","mpnr":"133","desc":"Recosyn® Uno ultraSodium hyaluronate intra-articularDescriptionThe product contains a prefilled syringe with hydrogel made from highly purified sodium hyaluronate obtained by bacterial fermentation without genetic modification, with high molecular weight, used to improve viscosity in intra-articular connective tissue. It has undergone steam sterilization for injectable products and is non-pyrogenic.The product contains 1 ml aqueous, physiological phosphate buffer solution with 25 mg Natriumhyaluronate. The sodium hyaluronate hydrogel is in a weak, sterile, isotonic, and apyrogenic phosphate-buffered saline solution with a pH of 7.2 (6.8 – 7.4) in sufficient volume for injection. The fill volume of a prefilled syringe is 4.8 ml.The chemical components are listed in the table on the right (weight per volume as mg substance per 1 ml hydrogel).Properties and mode of actionAn essential component of healthy synovial fluid is the widespread glycosaminoglycan hyaluronic acid. This natural biopolymer provides viscoelasticity and, thanks to its lubricating and shock-absorbing properties, enables pain-free physiological movements; it also supplies nutrients to the cartilage. The Recosyn® Uno ultra The contained sodium hyaluronate is a salt of hyaluronic acid.IndicationsPain and limitation of joint mobility in degenerative changes of the knee joint and other synovial joints, including osteoarthritis.ContraindicationsThe product must not be used in patients- with known hypersensitivity to any of the components- with inflammation in the joint- with septic arthritis- with skin infections or skin diseases in the injection area- in cases of natural or medication-induced coagulation disorders such as hemophiliaor when using anticoagulants such as Marcumar (phenprocoumon) or Coumadin (warfarin)Since there are no clinical data on the use of hyaluronic acid in children, pregnant or breastfeeding women, use in these patients is not recommended.PrecautionsSince septic arthritis can be a serious complication of the treatment, please observe all precautions usually necessary for surgical procedures. Injections of the hydrogel must be administered precisely into the joint cavity; injections into blood vessels and surrounding tissue must be avoided.Do not use if the prefilled syringe or sterile packaging is damaged.The opened product must not be resterilized, resealed, or reused. It is intended for use by a single patient at a single treatment session.Possible side effectsNo adverse effects were observed in biocompatibility tests with the product. Local reactions such as pain, redness, warmth, and swelling may occur in the treated joint. These symptoms can be reduced by applying an ice pack to the treated area for 5 to 10 minutes after injection. During the first days of treatment, the simultaneous oral intake of pain and anti-inflammatory medications (NSAIDs) may be beneficial. Treatment should be discontinued in case of severe pain or inflammation. Management of adverse reactions should only be carried out under the supervision of the treating physician. Immediately after the injection, strenuous physical activity should be avoided and other instructions from the physician should be followed.Medical professionals should inform the patient- about possible adverse events related to the product.- that the patient must report any adverse event or complication to a doctor.Pharmacological and chemical interactionsSo far, there are no data on the incompatibility of the product with other solutions for intra-articular use.There is a chemical incompatibility between sodium hyaluronate and quaternary ammonium compounds such as benzalkonium chloride, which can lead to crystalline precipitation. Therefore, this product must never come into contact with surgical instruments or other products containing these compounds or rinsed with solutions containing quaternary ammonium compounds as biocidal preservatives.Dosage, type, and duration of useRemove the prefilled...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-uno-ultra-recordati-pharma-gmbh-gelenkspritzen-stakonmed-680224.jpg?v=1772215382\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-uno-ultra-recordati-pharma-gmbh-gelenkspritzen-stakonmed-238505.jpg?v=1772215382\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/recosyn-uno-ultra-recordati-pharma-gmbh-gelenkspritzen-stakonmed-836943.jpg?v=1772215377\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/recosyn-uno-ultra-1-x-4-8-ml?variant=47355880964436\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":291.0,"price":134.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Recordati Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 120 mg \/ 4,8 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674366239060","meta_packungsgr_e":"1 Fertigspritze a 4,8 ml","meta_pzn":"13358298"}
{"item_group_id":15037192110420,"aid":53999822733652,"name":"RenehaVis 1x 1.4 ml","brand":"MDT Int‘l s.a.","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e RenehaVis","tags":"cat_Gelenkspritzen","ean":"","mpnr":"135","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/renehavis-1x-14-ml-originalprodukt-mdt-intl-sa-stakonmed-2169910.jpg?v=1774495632\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/renehavis-1x-14-ml-originalprodukt-mdt-intl-sa-stakonmed-9275491.jpg?v=1774495633\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/renehavis-1x-14-ml-originalprodukt-mdt-intl-sa-stakonmed-7609611.jpg?v=1774495632\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/renehavis?variant=53999822733652\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":248.0,"price":195.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"MDT Int‘l s.a.","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1x 1,4 ml"}
{"item_group_id":8748734873940,"aid":47355895775572,"name":"Restylane Defyne Lidocaine 1x 1.0 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Restylane","tags":"cat_Filler,cat_Restylane,Galderma Laboratorium GmbH","mpnr":"238","desc":"Restylane® Defyne LidocaineRestylane® Defyne Lidocaine is an injectable hyaluronic acid dermal filler for correcting pronounced wrinkles in the lower face area. The product is especially suitable for treating nasolabial folds, marionette lines, and wrinkles around the mouth corners.Due to its high lifting capacity, Restylane® Defyne Lidocaine supports effective wrinkle correction while maintaining natural facial expression. The addition of the local anesthetic lidocaine allows for a comfortable and largely painless injection.Treatment areasMarionette linesMouth corner areaNasolabial foldsproduct featuresHigh lifting capacity for pronounced immediate effects in the treatment areaSuitable for correcting deeper wrinkles while preserving natural facial dynamicsBased on Balance Technology (BT) for a softer gel texture and even tissue distributionSupports a smooth, harmonious skin appearanceComfortable, largely painless application due to contained lidocaineNotes on possible side effectsAs with all injection treatments, temporary mild redness, swelling, bruising, or increased tenderness at the injection site may occur. These symptoms usually subside within a few days. No serious side effects are known to date.GPSR informationGeneral informationCE marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-defyne-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-9603607.jpg?v=1777230013\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-defyne-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-2144728.jpg?v=1777230014\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-defyne-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-8956851.jpg?v=1777230015\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/restylane-defyne-1-x-1-0-ml?variant=47355895775572\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":196.35,"price":99.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Galderma Laboratorium GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":8748735005012,"aid":47355896136020,"name":"Restylane Kysse Lidocaine 1x 1.0 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Restylane","tags":"cat_Filler,cat_Restylane,Galderma Laboratorium GmbH","mpnr":"241","desc":"Restylane® Kysse LidocaineRestylane® Kysse Lidocaine is an injectable hyaluronic acid dermal filler specially designed for treating sensitive lips. The product allows for both subtle and visible lip augmentation and supports a natural lip shape with even texture.Due to its special formulation, Restylane® Kysse Lidocaine gently integrates into the lip tissue and helps minimize treatment-related swelling. The addition of the local anesthetic lidocaine ensures a pleasant and largely painless injection.Treatment areaslipsproduct featuresSpecifically developed for sensitive lip tissueGentle tissue integration with low swelling tendencyCustomizable for different treatment goals from subtle to pronouncedBased on Balance Technology (BT) for a softer gel texture and even distributionComfortable, largely painless application due to contained lidocaineGPSR informationGeneral informationCE marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-kysse-galderma-laboratorium-gmbh-filler-stakonmed-803776.jpg?v=1772215441\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-kysse-galderma-laboratorium-gmbh-filler-stakonmed-496624.jpg?v=1772215441\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-kysse-galderma-laboratorium-gmbh-filler-stakonmed-206663.jpg?v=1772215441\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/restylane-kysse-1-x-1-0-ml?variant=47355896136020\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":184.45,"price":94.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Galderma Laboratorium GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":11997553787220,"aid":51849713746260,"name":"Restylane Lidocaine 1x 1.0 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Restylane","tags":"cat_Filler,cat_Restylane,Galderma Laboratorium GmbH","mpnr":"242","desc":"Restylane® LidocaineRestylane® Lidocaine is an injectable hyaluronic acid dermal filler for treating fine lines and facial wrinkles. The product is suitable for versatile use in different facial areas and helps smooth wrinkles through volume enhancement and intensive hydration.Targeted injection improves skin texture and promotes a fresh, natural appearance. The addition of the local anesthetic lidocaine allows for a comfortable and largely painless treatment.Treatment areasEye areaBunny LinesFine linesCrow's feetMarionette Lines and Chin FoldsMouth Corner Area and LipsNasolabial Folds and Perioral WrinklesForehead AreaCheek areaproduct featuresImmediately visible effect with a natural finish and pronounced impact in the treatment areaBased on the patented NASHA® technology (Non-Animal Stabilized Hyaluronic Acid)Stable, precise gel structure for targeted integration into the tissueProven Safety ProfileComfortable, largely painless application due to contained lidocaineGPSR InformationGeneral informationCE marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-lidocaine-1x-10-ml-mhd-31032026-galderma-laboratorium-gmbh-filler-stakonmed-9593477.jpg?v=1772274021\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-lidocaine-1x-10-ml-mhd-31032026-galderma-laboratorium-gmbh-filler-stakonmed-7193676.jpg?v=1772274022\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-lidocaine-1x-10-ml-mhd-31032026-galderma-laboratorium-gmbh-filler-stakonmed-6820060.jpg?v=1772274022\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/restylane-lidocaine?variant=51849713746260\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":178.38,"price":84.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Galderma Laboratorium GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":11997559325012,"aid":51849726296404,"name":"Restylane Lyft Lidocaine 1x 1.0 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Restylane","tags":"cat_Filler,cat_Restylane,Galderma Laboratorium GmbH","mpnr":"243","desc":"Restylane® Lyft LidocaineRestylane® Lyft Lidocaine is an injectable hyaluronic acid dermal filler for treating deep facial wrinkles and targeted volume support in the cheek area. The product is especially suitable for areas with higher structural needs and enables effective wrinkle correction with a visibly smoothing effect.Due to its high lifting capacity, Restylane® Lyft Lidocaine supports precise contouring and contributes to a fresh, smooth skin appearance. The addition of the local anesthetic lidocaine allows for a comfortable and largely painless injection.Treatment areasFine linesMentolabial foldsMouth corner areaCheek areaproduct featuresVery high and precise lifting capacity for pronounced immediate effects in the treatment areaSuitable for correcting deep wrinkles and structural volume supportBased on the patented NASHA® technology (Non-Animal Stabilized Hyaluronic Acid)Firm, precise gel structure for targeted integration into tissueProven Safety ProfileComfortable, largely painless application due to contained lidocaineGPSR InformationGeneral informationCE marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-lyft-lidocaine-1x-10-ml-mhd-30042026-galderma-laboratorium-gmbh-filler-stakonmed-8509361.jpg?v=1772274021\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-lyft-lidocaine-1x-10-ml-mhd-30042026-galderma-laboratorium-gmbh-filler-stakonmed-2142005.jpg?v=1772274021\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-lyft-lidocaine-1x-10-ml-mhd-30042026-galderma-laboratorium-gmbh-filler-stakonmed-4862090.jpg?v=1772274021\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/restylane-lyft-lidocaine?variant=51849726296404\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":201.11,"price":98.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Galderma Laboratorium GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":11997562011988,"aid":51849734848852,"name":"Restylane Refyne Lidocaine 1x 1.0 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Restylane","tags":"cat_Filler,cat_Restylane,Galderma Laboratorium GmbH","mpnr":"244","desc":"Restylane® Refyne LidocaineRestylane® Refyne Lidocaine is an injectable hyaluronic acid dermal filler for correcting dynamic facial wrinkles. The product is especially suitable for treating marionette lines, nasolabial folds, corner of the mouth lines, as well as frown and forehead lines. Additionally, Restylane® Refyne Lidocaine can be used for subtle contour correction in the nose area.The soft gel structure allows for even distribution in the tissue and supports natural, harmonious results. The addition of lidocaine ensures a comfortable and largely painless injection.Treatment areasGlabellar lines \/ frown linesMarionette linesMouth corner areaNose area \/ nasal contourNasolabial foldsForehead areaTear troughs \/ under-eye bagsproduct featuresSoft gel texture for natural results in areas of active facial movementBased on Balance Technology (BT) for even tissue distributionSupports a fresh, youthful appearance without rigid effectsComfortable, largely painless application due to contained lidocaineGPSR InformationGeneral informationCE marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-refyne-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-4280134.jpg?v=1772274019\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-refyne-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-4589625.jpg?v=1772274019\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-refyne-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-3314548.jpg?v=1772274019\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/restylane-refyne?variant=51849734848852\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":173.74,"price":89.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Galderma Laboratorium GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":8748735168852,"aid":47355896299860,"name":"Restylane Skinboosters Vital Lidocaine 1x 1.0 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Restylane","tags":"cat_Filler,cat_Restylane,Galderma Laboratorium GmbH","mpnr":"245","desc":"Restylane® Skinboosters Vital LidocaineRestylane® Skinboosters Vital Lidocaine is an injectable hyaluronic acid preparation for intensive improvement of skin quality, hydration, and elasticity of mature skin. The product is especially suitable for treating fine to moderate wrinkles as well as for sustainable strengthening and firming of the skin structure.The use of stabilized hyaluronic acid provides long-term hydration to the skin and gives it a smoother, fresher appearance. The addition of lidocaine allows for a pleasant and largely painless injection.Treatment areasEye areaNeck and décolleté areaBack of the handFine linesCrow's feetMouth corner areaPerioral wrinklesCheek areaproduct featuresIntensive improvement of skin elasticity and hydration in mature skinHigher tissue coverage and stronger lifting capacity compared to Skinboosters Vital LightBased on the patented NASHA® technology (Non-Animal Stabilized Hyaluronic Acid)Stable, precise gel structure for targeted integration into the tissueComfortable, largely painless application due to contained lidocaineApplication notesThe injection is administered with the prefilled syringe directly into the areas to be treated, such as wrinkles or skin areas with reduced skin quality. Before treatment, the corresponding skin areas are cleaned and disinfected. Appropriate aftercare can support skin regeneration and help stabilize the results.Notes on Possible Side EffectsAs with all injection treatments, temporary mild redness, swelling, bruising, or itching may occur at the injection site. These symptoms usually subside within a few days. No serious side effects are known to date. The product is considered effective and well tolerated.GPSR InformationGeneral informationCE Marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-skinboosters-vital-lidocaine-galderma-laboratorium-gmbh-filler-stakonmed-703725.jpg?v=1772215554\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-skinboosters-vital-lidocaine-galderma-laboratorium-gmbh-filler-stakonmed-982435.jpg?v=1772215554\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-skinboosters-vital-lidocaine-galderma-laboratorium-gmbh-filler-stakonmed-286083.jpg?v=1772215554\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/restylane-skinboosters-vital-lidocaine-1-x-1-0-ml?variant=47355896299860\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":153.51,"price":69.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Galderma Laboratorium GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":11997564207444,"aid":51849740091732,"name":"Restylane Volyme Lidocaine 1x 1.0 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Restylane","tags":"cat_Filler,cat_Restylane,Galderma Laboratorium GmbH","mpnr":"247","desc":"Restylane® Volyme LidocaineRestylane® Volyme Lidocaine is an injectable hyaluronic acid dermal filler for volume restoration and shaping of central facial areas. The product is especially suitable for volume enhancement in the cheek and chin areas and is often used to support facial tightening.Targeted volume enhancement can achieve a fresh and smooth appearance. The addition of the local anesthetic lidocaine allows for a comfortable and largely painless injection.Treatment areasFine linesChin areaCheek areaproduct featuresSuitable for effective restoration of age-related volume loss and contouring of selected facial areasHigh volume effect for structural and shaping treatmentsBased on Balance Technology (BT) for a softer gel texture and even tissue distributionSupports a natural, smooth appearanceComfortable application thanks to included lidocaineGPSR InformationGeneral informationCE marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-volyme-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-2424133.jpg?v=1772274013\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-volyme-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-2655226.jpg?v=1772274012\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/restylane-volyme-lidocaine-1x-10-ml-galderma-laboratorium-gmbh-filler-stakonmed-2705006.jpg?v=1772274012\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/restylane-volyme?variant=51849740091732\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":213.01,"price":93.9,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Galderma Laboratorium GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":8748734710100,"aid":47355895578964,"name":"Saypha FILLER 1x 1.0 ml","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Saypha","tags":"cat_Filler,cat_Saypha,Croma-Pharma GmbH","mpnr":"248","desc":"Saypha® FillerSaypha® Filler is an injectable hyaluronic acid dermal filler for the correction of mild to moderate facial wrinkles. The product is especially suitable for treating nasolabial and marionette lines as well as smoothing frown lines. Additionally, Saypha® Filler can be used for lip contouring and subtle lip treatment.The filler is also suitable for use with the Hyaluron Pen and supports even, hydrating wrinkle correction with a natural appearance.Treatment areasEye areaGlabellar linesChin areaWrinkle folds and marionette linesCrow's feetLip areaMouth corner areaNasolabial folds and perioral wrinklesForehead areaCheek areaProduct featuresBased on S.M.A.R.T. technology with stabilization by glycerin instead of classic cross-linkingLong-lasting hydration through high hyaluronic acid concentration and high molecular weight (approx. 3 million Dalton)Supports sustainable improvement of skin moisture and a rejuvenated skin appearanceHigh product purity through special cleaning process to remove unwanted componentsSuitable for use with Hyaluron PenGPSR informationGeneral informationCE marking: YesManufacturer informationName: Croma Pharma GmbHAddress: Industriezeile 6, 2100 Leobendorf, AustriaEmail: office@croma.atWebsite: https:\/\/www.cromapharma.com\/European manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-filler-croma-pharma-gmbh-filler-stakonmed-365624.jpg?v=1772215609\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-filler-croma-pharma-gmbh-filler-stakonmed-122734.jpg?v=1772215609\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-filler-croma-pharma-gmbh-filler-stakonmed-239787.jpg?v=1772215609\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/saypha-filler-1-x-1-ml?variant=47355895578964\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":79.0,"price":49.9,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":8748734742868,"aid":47355895611732,"name":"Saypha FILLER Lidocaine 1x 1.0 ml        (EXP 31.05.2026)","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Saypha","tags":"cat_Filler,cat_Saypha,Croma-Pharma GmbH","mpnr":"249","desc":"Saypha® Filler LidocaineNote: The manufacturer revised the packaging design at the beginning of 2025. The product composition and quality remain unchanged.Saypha® Filler Lidocaine is an injectable hyaluronic acid dermal filler for the correction of mild to moderate facial wrinkles. The product is especially suitable for treating nasolabial and marionette lines as well as smoothing frown lines. Additionally, Saypha® Filler Lidocaine can be used for lip contouring and subtle lip treatment.The filler is suitable for use with the Hyaluron Pen. The addition of lidocaine supports a pleasant and largely painless treatment.Treatment AreasEye areaGlabellar linesChin areaWrinkle folds and marionette linesCrow's feetLip areaMouth corner areaNasolabial folds and perioral wrinklesForehead AreaCheek AreaProduct FeaturesBased on S.M.A.R.T. technology with stabilization by glycerin instead of classic cross-linkingLong-lasting hydration through high hyaluronic acid concentration and high molecular weight (approx. 3 million Dalton)Sustainable improvement of skin moisture and skin textureHigh product purity through special cleaning processComfortable, largely painless application due to contained lidocaineSuitable for use with the Hyaluron PenGPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Croma Pharma GmbHAddress: Industriezeile 6, 2100 Leobendorf, AustriaE-Mail: office@croma.atWebsite: https:\/\/www.cromapharma.com\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-filler-mit-lidocain-croma-pharma-gmbh-filler-stakonmed-659199.jpg?v=1772215626\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-filler-mit-lidocain-croma-pharma-gmbh-filler-stakonmed-979178.jpg?v=1772215631\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-filler-mit-lidocain-croma-pharma-gmbh-filler-stakonmed-777404.jpg?v=1772215631\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/saypha-filler-mit-lidocain-1-x-1-ml?variant=47355895611732\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":89.0,"price":63.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":8748734611796,"aid":47355895480660,"name":"Saypha RICH 1x 1.0 ml      (EXP 30.04.2026)","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Saypha","tags":"cat_Filler,cat_Saypha,Croma-Pharma GmbH","mpnr":"250","desc":"Saypha® RichSaypha® Rich is an injectable hyaluronic acid preparation for targeted improvement of skin quality, hydration, and elasticity. The product is especially suitable for revitalizing the dermis and treating the first visible signs of skin aging.Intensive moisture supply strengthens skin structure, reduces fine lines and wrinkles, and supports a smoother, firmer skin appearance. Saypha® Rich can be used on the face, neck, décolleté, and hands.Treatment AreasEye AreaDécolleté AreaNeck AreaHandsChin AreaMouth Corner AreaNose AreaForehead AreaCheek AreaProduct FeaturesRevitalization of the dermis to improve elasticity and firmnessBased on S.M.A.R.T. technology with stabilization by glycerin instead of classic cross-linkingLong-lasting hydration through high hyaluronic acid concentration and high molecular weight (approx. 3 million Dalton)Supports smoother, firmer, and more even skin textureHigh product purity through special cleaning processGPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Croma Pharma GmbHAddress: Industriezeile 6, 2100 Leobendorf, AustriaE-Mail: office@croma.atWebsite: https:\/\/www.cromapharma.com\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-rich-1x-10-ml-mhd-30042026-croma-pharma-gmbh-filler-stakonmed-1937592.jpg?v=1777230012\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-rich-1x-10-ml-mhd-30042026-croma-pharma-gmbh-filler-stakonmed-6477177.jpg?v=1777230013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-rich-1x-10-ml-mhd-30042026-croma-pharma-gmbh-filler-stakonmed-7533075.jpg?v=1777230013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/saypha-rich-1-x-1-ml?variant=47355895480660\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":67.0,"price":39.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":8748734644564,"aid":47355895513428,"name":"Saypha VOLUME 1x 1.0 ml","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Saypha","tags":"cat_Filler,cat_Saypha,Croma-Pharma GmbH","mpnr":"251","desc":"Saypha® VolumeSaypha® Volume is an injectable hyaluronic acid dermal filler for correcting medium to deep facial wrinkles and targeted volume restoration. The product is especially suitable for treating sagging skin areas and for structural support of central facial regions.Deep injection into the dermis achieves an immediate volume effect. At the same time, Saypha® Volume supports tissue stabilization through its elastic properties and counteracts renewed volume loss.Treatment AreasGlabellar LinesChin AreaWrinkle LinesMarionette LinesMouth Corner AreaNasolabial FoldsForehead AreaCheek AreaProduct FeaturesSuitable for volume restoration in medium to deep wrinklesHigh elasticity for structural support and stabilization of the tissueBased on S.M.A.R.T. technology with stabilization by glycerin instead of classic cross-linkingLong-lasting hydration through high hyaluronic acid concentration and high molecular weight (approx. 3 million Dalton)High product purity through special cleaning processGPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Croma Pharma GmbHAddress: Industriezeile 6, 2100 Leobendorf, AustriaE-Mail: office@croma.atWebsite: https:\/\/www.cromapharma.com\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-volume-croma-pharma-gmbh-filler-stakonmed-395127.jpg?v=1772215704\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-volume-croma-pharma-gmbh-filler-stakonmed-660990.jpg?v=1772215709\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-volume-croma-pharma-gmbh-filler-stakonmed-488987.jpg?v=1772215709\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/saypha-volume-1-x-1-ml?variant=47355895513428\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":99.0,"price":59.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":11997567582548,"aid":51849747431764,"name":"Saypha VOLUME Lidocaine 1x 1.0 ml","brand":"Croma-Pharma GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Saypha","tags":"cat_Filler,cat_Saypha,Croma-Pharma GmbH","mpnr":"252","desc":"Saypha® Volume LidocaineSaypha® Volume Lidocaine is an injectable hyaluronic acid dermal filler for correcting medium to deep facial wrinkles and targeted volume restoration. The product is especially suitable for treating sagging skin areas and for structural support of central facial areas.Deep injection into the dermis achieves an immediate volume effect. At the same time, the high elasticity of the gel provides stable tissue support and counteracts renewed volume loss. The filler is also suitable for use with the Hyaluron Pen. The addition of lidocaine enables a pleasant and largely painless treatment.Treatment AreasGlabella LinesChin AreaWrinkle LinesMarionette LinesMouth Corner AreaNasolabial FoldsForehead AreaCheek AreaProduct FeaturesSuitable for volume restoration in medium to deep wrinklesHigh elasticity for structural support and stabilization of tissueBased on S.M.A.R.T. technology with stabilization by glycerin instead of classic cross-linkingLong-lasting hydration through high hyaluronic acid concentration and high molecular weight (approx. 3 million Dalton)High product purity through special purification processComfortable, largely painless application due to contained lidocaineSuitable for use with the Hyaluron PenGPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Croma Pharma GmbHAddress: Industriezeile 6, 2100 Leobendorf, AustriaE-Mail: office@croma.atWebsite: https:\/\/www.cromapharma.com\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-volume-lidocaine-1x-10-ml-croma-pharma-gmbh-filler-stakonmed-3298029.jpg?v=1772274021\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-volume-lidocaine-1x-10-ml-croma-pharma-gmbh-filler-stakonmed-8796151.jpg?v=1772274022\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/saypha-volume-lidocaine-1x-10-ml-croma-pharma-gmbh-filler-stakonmed-3074197.jpg?v=1772274021\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/saypha-volume-mit-lidocain?variant=51849747431764\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":99.0,"price":59.5,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 1 ml"}
{"item_group_id":11997571645780,"aid":51849758212436,"name":"Sculptra 2x 5 ml","brand":"Galderma Laboratorium GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Sculptra","tags":"cat_Filler,cat_Sculptra,Sinclair Pharma GmbH","mpnr":"254","desc":"Sculptra® (poly-L-lactic acid, PLLA)Sculptra® is a collagen-biostimulating injectable based on poly-L-lactic acid (PLLA) for the correction of medium to deep wrinkles as well as for large-area volume restoration. The product specifically stimulates the body's own collagen production, leading to a gradual, natural improvement in skin texture, firmness, and contour.Unlike classic hyaluronic acid fillers, the result develops gradually over several weeks to months. Depending on the treatment area, one to three sessions are usually required. The achieved rejuvenation effect can last up to 18–24 months and can be extended if necessary with a touch-up treatment.Treatment areasJawlineChinNasolabial foldsCheek areaAdditional treatment areasMarionette linesSunken cheeksDécolletéBack of the handproduct featuresCollagen biostimulation through poly-L-lactic acid (PLLA)Suitable for large-area volume restoration and structural skin improvementGradual, natural results without immediate volume overcorrectionLong-lasting effect over 18–24 monthsSupports sustainable tightening and improvement of skin qualityMechanism of action and therapeutic approachSculptra® does not primarily work through immediate volume replacement but by activating the body's own collagen production. This strengthens and tightens the skin structure in the long term.In comparison, hyaluronic acid fillers are especially suitable for immediately visible, targeted correction of individual wrinkles. The choice of product depends on the desired treatment goal, the size of the area, and the expected time frame.GPSR InformationGeneral informationCE marking: YesManufacturer InformationName: Q-Med ABAddress: Seminariegatan 21, SE-752 28 Uppsala, SwedenEuropean manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sculptra-2x-5ml-galderma-laboratorium-gmbh-filler-stakonmed-4654087.jpg?v=1772274014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sculptra-2x-5ml-galderma-laboratorium-gmbh-filler-stakonmed-5912442.jpg?v=1772274014\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/sculptra?variant=51849758212436\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":365.0,"price":308.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Sinclair Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 x 1 Stück"}
{"item_group_id":12399068086612,"aid":53070053212500,"name":"Sensopax (120 capsules)","brand":"ReviMed GmbH","product_type":"Supplements","shop_cat":"Supplements","tags":"cat_Supplements","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sensopax-120-kapseln-revimed-gmbh-supplements-stakonmed-1343706.jpg?v=1770865394\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sensopax-120-kapseln-revimed-gmbh-supplements-stakonmed-6095765.jpg?v=1770865392\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/sensopax-126g-120kapseln?variant=53070053212500\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","price":37.9,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"ReviMed GmbH","meta_darreichungsform":"Nahrungsergänzungsmittel","meta_detail":"Mit Hericium und Vitamin C.","meta_packungsgr_e":"120 Kapseln \/ 126g"}
{"item_group_id":11997443621204,"aid":51849374204244,"name":"Sinogel 1x 3.0 ml      (EXP 31.07.2026)","brand":"IBSA","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Sinogel","tags":"cat_Gelenkspritzen,cat_Sinogel,IBSA","mpnr":"136","desc":"SINOGEL® 3 ml – Instructions for useDescriptionOsteoarthritis (OA) is a chronic degenerative disease characterized by progressive damage to the articular cartilage, narrowing of the joint space, remodeling of the subchondral bone, formation of marginal joint osteophytes, and synovitis. Optimal OA therapy consists of an intra-articular injection of exogenous hyaluronic acid, which can relieve symptoms by restoring the viscoelastic properties of synovial fluid.Hyaluronic acid sodium salt is formed from repetitive chains of disaccharide units of N-acetylglucosamine and sodium glucuronate and is an essential component of synovial fluid, where it acts as a joint lubricant under shear stress and as a shock absorber under compressive load.SINOGEL® 3 ml consists of a buffered saline solution of highly purified hyaluronic acid with high molecular weight and sodium chondroitin of biotechnological origin. The hyaluronic acid used in the medical device is obtained by fermentation and has not been chemically modified. This results in excellent tolerability.PurposeSINOGEL® 3 ml, with its special formula and high glycosaminoglycan concentration (GAG), belongs to the latest generation of intra-articular treatments and was specifically developed for viscosupplementation of large joints, where a large volume of solution with a high concentration of hyaluronic acid without high viscosity is recommended. Thanks to a special and patented treatment of the solution, the hyaluronic acid and sodium chondroitin chains present in the product interact with each other, giving the solution rheological properties so that the viscosity values are lower than those of pure hyaluronic acid at the same concentration.IndicationsSINOGEL® 3 ml is indicated for pain or movement restrictions due to degenerative diseases, post-traumatic disorders, or joint changes.SINOGEL® 3 ml is a medical device designed to restore the physiological and rheological properties of synovial fluid in joints affected by osteoarthritis.SINOGEL® 3 ml restores the viscoelastic properties of synovial fluid, relieves pain, and promotes the restoration of joint mobility.Target groups and usersSINOGEL® 3 ml is indicated for adults of both sexes and may only be administered by qualified personnel via intra-articular injection.SINOGEL® 3 ml is prescription-only.CompositionSINOGEL® 3 ml consists of a pre-filled syringe with 3 ml solution and contains the following ingredients:Functional ingredientQuantitySodium hyaluronate72 mgSodium chondroitin48 mgOther ingredientsQuantitySodium chloride21.000 mgMonosodium phosphate0.135 mgDisodium phosphate0.48 mgWater for injection purposesq.s. 3.0 mlDosageIt is recommended to perform 1 infiltration per treatment cycle. The appropriateness and frequency with which the treatment cycle can be repeated must be individually assessed by the physician, considering the risk-benefit ratio for each patient.Available packagesSINOGEL® 3 ml is available in packs containing 1 pre-filled syringe (72.0 mg sodium hyaluronate and 48.0 mg sodium chondroitin in 3 ml sodium chloride buffered saline) and a 21G x 1½” (0.8 x 40 mm) needle.The contents of the syringe are sterile and pyrogen-free.Pre-filled syringe steam sterilized.Needle sterilized with ethylene oxide.Manufacturer: Terumo Europe N. V. – Interleuvenlaan 40 – 3001 Leuven, BelgiumInstructions for useBefore injecting SINOGEL® 3 ml, joint effusions must be aspirated.Carefully unscrew the syringe cap, holding the Luer-Lock collar between your fingers and taking special care not to touch the opening.Screw the 21G needle (included in the package) firmly onto the Luer-Lock collar of the syringe until you feel slight resistance to ensure an airtight seal and prevent fluid leakage during administration.Inject SINOGEL® 3 ml at room temperature and under strictly aseptic conditions. For viscosupplementation of hip osteoarthritis, it is recommended to perform the injection under ultrasound guidance.Inject SINOGEL® 3 ml only int...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sinogel-1x-30-ml-ibsa-gelenkspritzen-stakonmed-4474722.jpg?v=1772274022\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sinogel-1x-30-ml-ibsa-gelenkspritzen-stakonmed-8622159.jpg?v=1772274022\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/sinogel-1x-30-ml-ibsa-gelenkspritzen-stakonmed-5015354.jpg?v=1772274020\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/sinogel?variant=51849374204244\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":390.0,"price":109.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"IBSA","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57234782290260","meta_packungsgr_e":"1 Fertigspritze a 1 ml","meta_pzn":"18804615"}
{"item_group_id":11997452009812,"aid":51849410478420,"name":"Sinovial 16 1x 2.0 ml","brand":"IBSA","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synovial","tags":"cat_Gelenkspritzen,cat_Sinovial,IBSA","mpnr":"138","desc":"","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sinovial-16-1x-20-ml-ibsa-gelenkspritzen-stakonmed-3177906.jpg?v=1772274013\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sinovial-16-1x-20-ml-ibsa-gelenkspritzen-stakonmed-8151013.jpg?v=1772274012\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/sinovial-16-1x-20-ml-ibsa-gelenkspritzen-stakonmed-7585862.jpg?v=1772274013\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/sinovial-16?variant=51849410478420\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":58.0,"price":14.85,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"IBSA","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57234831180116","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"19339072"}
{"item_group_id":11997447422292,"aid":51849393176916,"name":"Sinovial HL 64 1x 2.0 ml","brand":"IBSA","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synovial","tags":"cat_Gelenkspritzen,cat_Sinovial,IBSA","ean":"","mpnr":"137","desc":"SINOVIAL® HL 64 2 ml – Instructions for useDescriptionHyaluronic acid sodium salt is formed from repetitive chains of disaccharide units of N-acetylglucosamine and sodium glucuronate and is an essential component of synovial fluid, giving it its special viscoelastic properties.SINOVIAL® HL 64 2 ml consists of a buffered saline solution with high-molecular-weight (H-HA) and low-molecular-weight (L-HA) hyaluronic acid.The high- and low-molecular-weight hyaluronic acid used in the medical device is obtained by fermentation and has not been chemically modified. This results in excellent tolerability.Furthermore, the HA chains with different molecular weights contained in SINOVIAL® HL 64 2 ml interact with each other thanks to a specific and patented treatment of the solution, giving SINOVIAL® HL 64 2 ml unique rheological properties that allow higher concentrations of hyaluronic acid to be administered at the same solution viscosity.The HA chains with different molecular weights offer greater resistance to hyaluronidase, as this enzyme cannot recognize the conformation of these high-molecular complexes. Therefore, SINOVIAL® HL 64 2 ml is better suited for in vivo applications in tissues.Purpose of useSINOVIAL® HL 64 2 ml with its special formula belongs to the latest generation of intra-articular treatments. SINOVIAL® HL 64 2 ml is a medical device designed to restore the physiological and rheological properties of synovial fluid in joints affected by osteoarthritis. SINOVIAL® HL 64 2 ml reduces joint pain and promotes the restoration of associated joint mobility. Clinical data have shown that SINOVIAL® HL 64 2 ml combined with laser therapy can improve symptoms associated with tendinopathy.Areas of applicationSINOVIAL® HL 64 2 ml is indicated for pain or limited mobility due to degenerative diseases (e.g., osteoarthritis), post-traumatic disorders associated with acute and chronic joint complaints in large and small joints.Target groups and usersSINOVIAL® HL 64 2 ml is indicated for adult men and women and should only be administered by qualified personnel via intra-articular injection.CompositionSINOVIAL® HL consists of a prefilled syringe with 1 or 2 ml solution containing the following ingredients:ComponentSyringe volume 1 mlSyringe volume 2 mlSodium hyaluronate16 mg (H-HA) + 16 mg (L-HA)32 mg (H-HA) + 32 mg (L-HA)Sodium chloride8.000 mg16.000 mgSodium phosphate0.205 mg0.410 mgWater for injection purposesq.s. 1.0 mlq.s. 2.0 mlDosageIt is recommended to perform 1 infiltration per week, with a maximum of 3 infiltrations per treatment cycle. The appropriateness and frequency with which the treatment cycle can be repeated must be individually assessed by the physician considering the risk-benefit ratio for each patient.Available packagesSINOVIAL® HL 64 2 ml is available in packages with 1 prefilled syringe in the following volumes:1 ml prefilled syringe (16 mg (H-HA) + 16 mg (L-HA) hyaluronic acid sodium salt in 1 ml sodium chloride buffered saline) and a 21G x 1½” (0.8 x 40 mm) needle1 ml prefilled syringe (16 mg (H-HA) + 16 mg (L-HA) hyaluronic acid sodium salt in 1 ml sodium chloride buffered saline) and two needles: 1 needle 22 G x 1½” (0.7 x 40 mm); 1 needle 29 G x ½ TW (0.3 x 12 mm)2 ml prefilled syringe (32 mg (H-HA) + 32 mg (L-HA) hyaluronic acid sodium salt in 2 ml sodium chloride buffered saline) and a 21G x 1½” (0.8 x 40 mm) needle.The contents of the syringe are sterile and pyrogen-free.Prefilled syringe steam sterilized.Needles sterilized with ethylene oxide.Manufacturer: Terumo Europe N. V. – Interleuvenlaan 40 – 3001 Leuven, BelgiumInstructions for useJoint effusions must be aspirated before injecting SINOVIAL® HL 64 2 ml.Carefully unscrew the syringe cap, holding the Luer-Lock collar between your fingers and taking special care not to touch the opening.Screw the 21G needle (included in the kit) firmly onto the Luer-Lock collar of the syringe until you feel slight resistance to ensure an airtight seal and prevent...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sinovial-hl-64-1x-20-ml-ibsa-gelenkspritzen-stakonmed-3381160.jpg?v=1772274014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sinovial-hl-64-1x-20-ml-ibsa-gelenkspritzen-stakonmed-4431735.jpg?v=1772274013\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/sinovial-hl-64-1x-20-ml-ibsa-gelenkspritzen-stakonmed-9170070.jpg?v=1772274012\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/sinovial-hl-64?variant=51849393176916\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":195.0,"price":97.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"IBSA","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57234831180116","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"18804644"}
{"item_group_id":8748732121428,"aid":47355881029972,"name":"SportVis 1x 1.2 ml","brand":"Recordati Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e SportVis","tags":"240968,cat_Gelenkspritzen,cat_SportVis,Recordati Pharma GmbH","mpnr":"140","desc":"SportVisTMFor pain relief and optimization of ankle recovery after first or second degree sprains.For the relief of chronic pain and movement restrictions of the elbow in lateral epicondylalgia.For the relief of pain in patients with symptomatic rotator cuff tendinopathy.Dosage form:SportVisTM is a clear, sterile solution of 1% sodium hyaluronate in phosphate-buffered saline in a prefilled syringe fora series of two periarticular injections into the soft tissue of the ankle: a periarticular injection preferably within 48 hours after the injury and a second periarticular injection 2 to 3 days after the first injection.a periarticular injection in the area of the humeral epicondyle, if necessary, followed by a second injection one week after the first injection.a periarticular injection of SportVisTM into the subacromial space of the shoulder directly above the tendon, followed by a second periarticular injection 14 days after the first injection.Sodium hyaluronate is a long-chain polysaccharide made of consists of repeating disaccharide units and naturally occurs in the body.The pH value and osmolality of SportVisTM are biocompatible with soft tissue.1.2 ml SportVisTM, sterilized by filtration, are contained in a ready-to-use single-use glass syringe. The syringe is packaged in a blister pack and an outer carton.Dosage and administration:The periarticular injection of SportVisTM should only be performed by a medical professional experienced in this technique.Dosage:a periarticular injection preferably within 48 hours after a first or second degree ankle sprain and a second injection 2 to 3 days after the first injection. A 27 gauge injection needle is recommended.a periarticular injection in the area of the lateral epicondyle of the humerus, followed by a second injection at the same site one week after the first injection. A 27 gauge injection needle is recommended.a periarticular injection of SportVisTM into the subacromial space of the shoulder directly above the tendon, followed by a second periarticular injection 14 days after the first injection. A 22 gauge injection needle is recommended.The syringe content is sterile and should be injected with a needle of a size suitable for the injection site.The area to be treated should be disinfected before the injection.Ankle sprains:Periarticular injections should be applied using a single puncture along the anterior talofibular ligament using clinical landmarks. The injection is administered along 3 planes: anteroposterior, medial, and lateral to the proximal landmark on the ligament.1.2 ml of SportVisTM is preferably injected within 48 hours after the injury, and a second injection of 1.2 ml is given 2 to 3 days after the first injection.Lateral epicondylalgia:Carefully palpate to locate the most painful point in the epicondyle area.Position the needle at a 45-degree angle to the point of maximum pain in the area of the lateral epicondyle.After piercing the skin, align the needle parallel to the skin and insert it towards the point of maximum pain at the lateral epicondyle. Inject half of the content while withdrawing the needle back towards the skin (but not out of the skin).Rotate the needle 180 degrees (opposite direction) and insert the needle parallel to the skin towards the point of maximum pain at the lateral epicondyle. Inject the remaining content while withdrawing the needle outward.Withdraw the needle from the skin.Bend and straighten the elbow five times, then rotate it inward and outward five times.Rotator cuff tendinopathy:Have the patient sit upright, arm relaxed at the side and rotated outward. For guiding the injection, it is recommended to use an ultrasound probe positioned laterally on the shoulder, directed towards the plane of the supraspinatus tendon. Locate the acromion, greater tubercle, humeral head, and subacromial space. Insert the needle 1 cm posterior and 2 cm distal to the anterolateral acromial edge into the space. Advance the needle horizontal...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sportvis-recordati-pharma-gmbh-gelenkspritzen-stakonmed-720046.jpg?v=1772215833\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/sportvis-recordati-pharma-gmbh-gelenkspritzen-stakonmed-851760.jpg?v=1772215833\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/sportvis-recordati-pharma-gmbh-gelenkspritzen-stakonmed-327907.jpg?v=1772215833\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/sportvis-1-x-1-2-ml?variant=47355881029972\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":76.73,"price":49.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Recordati Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 12 mg \/ 1,2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674390946132","meta_packungsgr_e":"1 Fertigspritze a 1,2 ml","meta_pzn":"240968"}
{"item_group_id":11997577970004,"aid":51849768141140,"name":"Stylage L Bi-Soft 2x 1.0 ml","brand":"VIVACY Laboratoires","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Stylage","tags":"cat_Filler,cat_Stylage,VIVACY Laboratoires","mpnr":"255","desc":"STYLAGE® L Bi-SOFTSTYLAGE® L Bi-SOFT is an injectable hyaluronic acid dermal filler for treating medium to deep wrinkles as well as targeted restoration and stabilization of volume. The product is especially suitable for correcting deep nasolabial folds, frown lines, and for modeling and tightening sagging cheek areas.Additionally, STYLAGE® L Bi-SOFT supports contouring of cheeks and mouth corners and can also be used for hand rejuvenation, earlobe correction, and nose contouring. The included 0.9% mannitol acts as an antioxidant and slows the natural breakdown of hyaluronic acid.Treatment areasGlabellar linesHandsChin areaWrinkle and marionette linesCrow's feetLipsMentolabial and nasolabial foldsMouth corner areaNose areaPerioral wrinklesCheek areaProduct featuresSuitable for medium to deep wrinkles as well as volume stabilizationEffective smoothing of deep nasolabial and frown linesSupports tightening and contouring of sagging cheeksContains 0.9% mannitol to reduce oxidative processes and extend shelf lifeHigh elasticity for natural results and harmonious tissue integrationBi-SOFT® Injection TechnologyBi-SOFT® is a patented next-generation injection system. The ergonomically optimized syringe offers increased precision, control, and user comfort, supporting safe and even injection in everyday practice.Product line STYLAGE®The STYLAGE® product line includes non-animal origin hyaluronic acid dermal fillers with different gel strengths for various indications. The hyaluronic acid is fully biodegradable and free of toxins.The innovative IPN technology with double 3D matrix combines cross-linked hyaluronic acid with the antioxidant mannitol. This enables high elasticity, effective volume enhancement, as well as natural and long-lasting results. At the same time, the risk of swelling and bruising is reduced.GPSR informationGeneral informationCE marking: YesManufacturer informationName: Laboratoires VIVACYAddress: 252 rue Douglas Engelbart, Archamps Technopole, 74160 Archamps, FranceEmail: contact@vivacylab.co.ukWebsite: https:\/\/vivacy.com\/en\/European manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-l-bi-soft-2x-10-ml-vivacy-laboratoires-filler-stakonmed-5493673.jpg?v=1772274015\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-l-bi-soft-2x-10-ml-vivacy-laboratoires-filler-stakonmed-6643723.jpg?v=1772274015\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/stylage-l-bi-soft?variant=51849768141140\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":224.0,"price":129.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"VIVACY Laboratoires","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":11997581738324,"aid":51849780134228,"name":"Stylage L Bi-Soft Lidocaine 2x 1.0 ml","brand":"VIVACY Laboratoires","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Stylage","tags":"cat_Filler,cat_Stylage,VIVACY Laboratoires","mpnr":"256","desc":"STYLAGE® L Bi-SOFT LidocaineSTYLAGE® L Bi-SOFT Lidocaine is an injectable hyaluronic acid dermal filler for treating medium to deep wrinkles and for targeted restoration and stabilization of volume. The product is especially suitable for smoothing deep nasolabial folds, frown lines, and for tightening and contouring sagging cheek areas.Additionally, STYLAGE® L Bi-SOFT Lidocaine supports the definition of cheeks and mouth corners and can also be used for hand rejuvenation, earlobe correction, and nose contouring. The included 0.9% mannitol acts as an antioxidant and slows the natural breakdown of hyaluronic acid. The addition of lidocaine allows for a pleasant and largely painless injection.Treatment areasGlabellar linesHandsChin areaWrinkle and marionette linesCrow's feetLipsMentolabial and nasolabial wrinklesMouth corner areaNose areaPerioral wrinklesCheek areaProduct featuresSuitable for medium to deep wrinkles as well as volume stabilizationEffective smoothing of deep nasolabial and frown linesSupports tightening and contouring of sagging cheeksContains 0.9% mannitol to reduce oxidative processes and extend shelf lifeHigh elasticity for natural results and harmonious tissue integrationComfortable, largely painless application thanks to included lidocaineBi-SOFT® Injection TechnologyBi-SOFT® is a patented next-generation injection system. The ergonomically optimized syringe offers increased precision, control, and user comfort, supporting safe and even injection in everyday practice.Product line STYLAGE®The STYLAGE® product line includes non-animal hyaluronic acid dermal fillers with different gel strengths for various indications. The hyaluronic acid is fully biodegradable and free of toxins.The innovative IPN technology with a double 3D matrix combines cross-linked hyaluronic acid with the antioxidant mannitol. This enables high elasticity, effective volume and wrinkle correction, as well as natural and long-lasting results. At the same time, the risk of treatment-related swelling and bruising is reduced.GPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Laboratoires VIVACYAddress: 252 rue Douglas Engelbart, Archamps Technopole, 74160 Archamps, FranceE-Mail: contact@vivacylab.co.ukWebsite: https:\/\/vivacy.com\/en\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-l-bi-soft-lidocaine-2x-10-ml-vivacy-laboratoires-filler-stakonmed-8413682.jpg?v=1772274022\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-l-bi-soft-lidocaine-2x-10-ml-vivacy-laboratoires-filler-stakonmed-6462610.jpg?v=1772274021\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/stylage-l-lidocaine-bi-soft?variant=51849780134228\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":229.0,"price":134.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"VIVACY Laboratoires","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":11997584425300,"aid":51849789505876,"name":"Stylage M Bi-Soft 2x 1.0 ml","brand":"VIVACY Laboratoires","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Stylage","tags":"cat_Filler,cat_Stylage,VIVACY Laboratoires","mpnr":"257","desc":"STYLAGE® M Bi-SOFTSTYLAGE® M Bi-SOFT is an injectable hyaluronic acid dermal filler for correcting fine to medium-deep wrinkles and for targeted contouring of selected facial areas. The product is especially suitable for treating chin sagging and supports the definition of cheek and lip contours.Additionally, STYLAGE® M Bi-SOFT can be used for hand rejuvenation as well as for correcting earlobes and nose contour. The included 0.9% mannitol acts as an antioxidant and slows the natural breakdown of hyaluronic acid, thereby supporting the durability of the result.Treatment areasHandsChin areaWrinkle and marionette linesCrow's feetLipsMentolabial and nasolabial foldsMouth corner areaNose areaForehead areaCheek areaProduct featuresSuitable for correcting fine to medium-deep wrinklesSupports contouring of chin, cheeks, and lipsContains 0.9% mannitol to reduce oxidative processes and extend durabilityHigh elasticity for natural results and harmonious tissue integrationReduced risk of swelling and bruising due to antioxidant propertiesBi-SOFT® Injection TechnologyBi-SOFT® is a patented next-generation injection system. The ergonomically optimized syringe offers increased precision, control, and user comfort, supporting safe and even injection in everyday practice.STYLAGE® product lineThe STYLAGE® product line includes non-animal origin hyaluronic acid dermal fillers with different gel strengths for various indications. The hyaluronic acid is fully biodegradable and free of toxins.The innovative IPN technology with a double 3D matrix combines cross-linked hyaluronic acid with the antioxidant mannitol. This enables high elasticity, effective wrinkle correction, as well as natural and long-lasting results. At the same time, the risk of treatment-related swelling is reduced.GPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Laboratoires VIVACYAddress: 252 rue Douglas Engelbart, Archamps Technopole, 74160 Archamps, FranceE-Mail: contact@vivacylab.co.ukWebsite: https:\/\/vivacy.com\/en\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-m-bi-soft-2x-10-ml-vivacy-laboratoires-filler-stakonmed-3854121.jpg?v=1772274012\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-m-bi-soft-2x-10-ml-vivacy-laboratoires-filler-stakonmed-5449190.jpg?v=1772274014\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/stylage-m-bi-soft?variant=51849789505876\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":183.0,"price":115.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"VIVACY Laboratoires","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":8748735529300,"aid":47355896955220,"name":"Stylage M Bi-Soft Lidocaine 2x 1.0 ml","brand":"VIVACY Laboratoires","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Stylage","tags":"cat_Filler,cat_Stylage,VIVACY Laboratoires","mpnr":"258","desc":"STYLAGE® M Bi-SOFT LidocaineSTYLAGE® M Bi-SOFT Lidocaine is an injectable hyaluronic acid dermal filler for correcting fine to medium-deep wrinkles and targeted contouring of selected facial areas. The product is suitable, among other uses, for treating chin sagging and defining cheek and lip contours. Additionally, STYLAGE® M Bi-SOFT Lidocaine can be used for hand rejuvenation, earlobe correction, and nose contouring.The filler also contains 0.9% mannitol, an antioxidant that slows the natural breakdown of hyaluronic acid and helps stabilize the treatment result. The addition of lidocaine allows for a comfortable and largely painless injection.Treatment areasHandsChin areaWrinkle and marionette linesCrow's feetLipsMentolabial and nasolabial foldsMouth corner areaNose areaForehead areaCheek areaProduct featuresSuitable for correcting fine to medium-deep wrinkles as well as contouring various facial areasContains 0.9% mannitol to reduce oxidative processes and extend shelf lifeGood elasticity for a natural appearance and harmonious tissue integrationReduced risk of swelling and bruising due to antioxidant propertiesComfortable, largely painless application thanks to included lidocaineBi-SOFT® Injection TechnologyBi-SOFT® is a patented next-generation injection system. The ergonomically optimized syringe was developed for higher precision, control, and user comfort, supporting a safe, consistent injection in everyday practice.Product line STYLAGE®The STYLAGE® product line includes non-animal origin hyaluronic acid dermal fillers with different gel strengths for various indications. The hyaluronic acid is biodegradable and free of toxins.The innovative IPN technology with a double 3D matrix combines cross-linked hyaluronic acid with the antioxidant mannitol. This allows for high elasticity, effective volume and wrinkle correction, as well as a natural and long-lasting treatment result.GPSR InformationGeneral InformationCE Marking: YesManufacturer InformationName: Laboratoires VIVACYAddress: 252 rue Douglas Engelbart, Archamps Technopole, 74160 Archamps, FranceE-Mail: contact@vivacylab.co.ukWebsite: https:\/\/vivacy.com\/en\/European Manufacturer: Yes","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-m-lidocaine-bi-soft-vivacy-laboratoires-filler-stakonmed-335762.jpg?v=1772215935\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/stylage-m-lidocaine-bi-soft-vivacy-laboratoires-filler-stakonmed-973283.jpg?v=1772215941\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/stylage-m-lidocaine-bi-soft-2-x-1-0-ml?variant=47355896955220\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":188.0,"price":117.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"VIVACY Laboratoires","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":11997454500180,"aid":51849421750612,"name":"Suplasyn 1 Shot 60 1x 6.0 ml","brand":"Mylan Teoranta","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Suplasyn \u003e Suplasyn","tags":"cat_Gelenkspritzen,cat_Suplasyn,Mylan Teoranta","mpnr":"142","desc":"SUPLASYN® \/ SUPLASYN® 1-ShotSterile Sodium Hyaluronate SolutionHyaluronic acid is a common component of synovial fluid and plays a central role in maintaining the physiological environment of the joint.CompositionViscoelastic solution of purified hyaluronic acid with a defined molecular weight, produced by fermentation.One prefilled syringe contains:SUPLASYNSUPLASYN 1-ShotSodium hyaluronate20 mg60 mgIsotonic, buffered aqueous solution2 ml6 mlPropertiesHyaluronic acid is the prototype of a large group of polysaccharides (glycosaminoglycans) that are important components of all extracellular tissue structures, including cartilage and synovial fluid. The active ingredient of SUPLASYN is a hyaluronic acid of defined molecular chain length with a high degree of purity. Injection of SUPLASYN into the joint space helps normalize joint function after joint puncture.IndicationsSUPLASYN and SUPLASYN 1-Shot are indicated for the symptomatic treatment of osteoarthritis. SUPLASYN has a therapeutic effect in treating pain and improving joint function in osteoarthritis. Multiple joints can be treated simultaneously.Dosage and Method of AdministrationDepending on the size of the joint, up to 6 ml is injected intra-articularly.SUPLASYN: The usual treatment with SUPLASYN in 2 ml syringes consists of 3 injections at weekly intervals; up to 6 injections can be administered depending on the severity of the condition.SUPLASYN 1-Shot: For single use only.Aseptic conditions must be strictly observed. Any remaining hyaluronic acid in the prefilled syringes must be discarded. To use the prefilled syringe, remove the “Luer-lock cap,” attach a suitable needle (21-25 G recommended depending on the size of the joint), and secure it by gently twisting. The graduations on the syringe label are for orientation purposes only.Contraindications\/PrecautionsDo not use in patients with known hypersensitivity to the ingredients of SUPLASYN. General precautions and contraindications for intra-articular injections must be observed. Do not inject intravascularly. SUPLASYN should only be used in joints free of inflammation\/irritation, as adverse reactions are more common in patients with existing joint inflammation\/irritation.There are no clinical data on the use of hyaluronic acid in children, pregnant, or breastfeeding women. Therefore, SUPLASYN should not be used in these patient groups.After injection of SUPLASYN, the treated joint should be rested for 24-48 hours. Physically strenuous activities should be avoided throughout the treatment period with SUPLASYN.Temporary, short-lasting pain may occur after joint injection as a result of the injection itself. Mild local reactions such as pain, warmth, overheating, redness, effusion, irritation, and swelling\/inflammation may occur in the area of the affected joint. If such symptoms occur, it is recommended to rest the affected joint and apply ice. In most patients, these symptoms resolve within a few days.In rare cases, as a sign of hypersensitivity, mild local reactions such as pain, irritation, swelling\/joint inflammation, and effusion may be more pronounced and severe. In these cases, therapeutic intervention such as joint puncture may be necessary. Local adverse reactions may be accompanied by systemic reactions such as fever, chills, or circulatory reactions, and in rare cases, anaphylactic reactions may occur.In extremely rare cases, rash\/itching, hives (urticaria), inflammation of the joint lining (synovitis), and a drop in blood pressure have been observed after injection of SUPLASYN. Administration should be discontinued if adverse reactions occur. Do not use SUPLASYN with instruments sterilized in quaternary ammonium salt solutions.WarningsKeep out of reach of children. Do not use if the blister packaging is damaged. For use by physicians only. For single use only. Any remaining contents in the syringe must be discarded. Reuse carries the risk of contamination and\/or infection or cross-infection of patients...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/suplasyn-1-shot-60-1x-60-ml-mylan-teoranta-gelenkspritzen-stakonmed-5649656.jpg?v=1772274022\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/suplasyn-1-shot-60-1x-60-ml-mylan-teoranta-gelenkspritzen-stakonmed-1991053.jpg?v=1772274020\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/suplasyn-1-shot-60-1x-60-ml-mylan-teoranta-gelenkspritzen-stakonmed-1518775.jpg?v=1772274021\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/suplasyn-1-shot-60?variant=51849421750612\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":253.31,"price":117.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Mylan Teoranta","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57234907955540","meta_packungsgr_e":"1 Fertigspritze a 6 ml","meta_pzn":"17978419"}
{"item_group_id":8748732154196,"aid":47355881062740,"name":"Suplasyn 1x 2.0 ml","brand":"Mylan Teoranta","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Suplasyn \u003e Suplasyn","tags":"17978425,cat_Gelenkspritzen,cat_Suplasyn,Mylan Teoranta","mpnr":"141","desc":"SUPLASYN® \/ SUPLASYN® 1-ShotSterile Sodium Hyaluronate SolutionHyaluronic acid is a common component of synovial fluid and plays a central role in maintaining the physiological environment of the joint.CompositionViscoelastic solution of purified hyaluronic acid with a defined molecular weight, produced by fermentation.One prefilled syringe contains:SUPLASYNSUPLASYN 1-ShotSodium hyaluronate20 mg60 mgIsotonic, buffered aqueous solution2 ml6 mlPropertiesHyaluronic acid is the prototype of a large group of polysaccharides (glycosaminoglycans) that are important components of all extracellular tissue structures, including cartilage and synovial fluid. The active ingredient of SUPLASYN is a hyaluronic acid of defined molecular chain length with a high degree of purity. Injection of SUPLASYN into the joint space helps normalize joint function after joint puncture.IndicationsSUPLASYN and SUPLASYN 1-Shot are indicated for the symptomatic treatment of osteoarthritis. SUPLASYN has a therapeutic effect in treating pain and improving joint function in osteoarthritis. Multiple joints can be treated simultaneously.Dosage and Method of AdministrationDepending on the size of the joint, up to 6 ml is injected intra-articularly.SUPLASYN: The usual treatment with SUPLASYN in 2 ml syringes consists of 3 injections at weekly intervals; up to 6 injections can be administered depending on the severity of the condition.SUPLASYN 1-Shot: For single use only.Aseptic conditions must be strictly observed. Any remaining hyaluronic acid in the prefilled syringes must be discarded. To use the prefilled syringe, remove the “Luer-lock cap,” attach a suitable needle (21-25 G recommended depending on the size of the joint), and secure it by gently twisting. The graduations on the syringe label are for orientation purposes only.Contraindications\/PrecautionsDo not use in patients with known hypersensitivity to the ingredients of SUPLASYN. General precautions and contraindications for intra-articular injections must be observed. Do not inject intravascularly. SUPLASYN should only be used in joints free of inflammation\/irritation, as adverse reactions are more common in patients with existing joint inflammation\/irritation.There are no clinical data on the use of hyaluronic acid in children, pregnant, or breastfeeding women. Therefore, SUPLASYN should not be used in these patient groups.After injection of SUPLASYN, the treated joint should be rested for 24-48 hours. Physically strenuous activities should be avoided throughout the treatment period with SUPLASYN.Temporary, short-lasting pain may occur after joint injection as a result of the injection itself. Mild local reactions such as pain, warmth, overheating, redness, effusion, irritation, and swelling\/inflammation may occur in the area of the affected joint. If such symptoms occur, it is recommended to rest the affected joint and apply ice. In most patients, these symptoms resolve within a few days.In rare cases, as a sign of hypersensitivity, mild local reactions such as pain, irritation, swelling\/joint inflammation, and effusion may be more pronounced and severe. In these cases, therapeutic intervention such as joint puncture may be necessary. Local adverse reactions may be accompanied by systemic reactions such as fever, chills, or circulatory reactions, and in rare cases, anaphylactic reactions may occur.In extremely rare cases, rash\/itching, hives (urticaria), inflammation of the joint lining (synovitis), and a drop in blood pressure have been observed after injection of SUPLASYN. Administration should be discontinued if adverse reactions occur. Do not use SUPLASYN with instruments sterilized in quaternary ammonium salt solutions.WarningsKeep out of reach of children. Do not use if the blister packaging is damaged. For use by physicians only. For single use only. Any remaining contents in the syringe must be discarded. Reuse carries the risk of contamination and\/or infection or cross-infection of patients...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/suplasyn-mylan-teoranta-gelenkspritzen-stakonmed-708382.jpg?v=1772215985\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/suplasyn-mylan-teoranta-gelenkspritzen-stakonmed-706510.jpg?v=1772215985\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/suplasyn-mylan-teoranta-gelenkspritzen-stakonmed-412955.jpg?v=1772215985\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/suplasyn-1-x-2-ml?variant=47355881062740\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":46.99,"price":24.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Mylan Teoranta","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"17978425"}
{"item_group_id":8748732186964,"aid":47355881095508,"name":"Synocrom 1x 2.0 ml","brand":"Croma-Pharma GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synocrom","tags":"3820100,BAUSCH \u0026 LOMB GmbH Surgical,cat_Gelenkspritzen,cat_Synocrom","mpnr":"143","desc":"Instructions for use of Synocrom1. Purpose and IndicationsThis product is a medical device intended for use in humans and is injected into synovial joints (knee, hip, ankle, and shoulder) to restore the natural viscoelastic properties of the synovial fluid (viscosupplementation). It is indicated for the treatment of pain and restricted mobility due to degenerative or traumatic changes in synovial joints (osteoarthritis).2. DescriptionThe product consists of a sterile, isotonic, viscoelastic solution for intra-articular use and is supplied in a prefilled syringe. Each prefilled syringe contains 2 ml of the viscoelastic solution. 1 ml of the product contains: 10 mg (1%) sodium hyaluronate as well as sodium chloride, sodium monohydrogen phosphate, citric acid, and water for injection purposes. The product is delivered sterile and is intended for single use only. The product is steam sterilized in its blister packaging (sterile barrier). No ingredients or raw materials of animal origin are used in the manufacture of the product. The product contains no medicinal active substances.3. Method of Administration and DosageRemove the prefilled syringe from the sterile container, carefully unscrew the rubber cap from the Luer-Lock connector, attach a suitable needle, and secure it with a slight twist. Hold the syringe during administration as shown in Figure 1. Depending on the size of the joint, up to 2 ml can be administered intra-articularly. For knee application, 3 to 5 injections of the product at weekly intervals are recommended. For hip, ankle, and shoulder, 1 to 5 injections may be required; clinical experience and patient improvement should guide the number of applications. Multiple joints can be treated simultaneously, and treatment cycles can be repeated. To avoid intra-articular infections, the injection must be performed under strict aseptic conditions. It is recommended to apply an ice pack to the treated joint for 5–10 minutes after administration to prevent pain and swelling.4. Properties and Mode of ActionIn patients with degenerative joint disease (osteoarthritis), the viscoelasticity of the synovial fluid is significantly impaired. This leads to mechanical stress on the joint and degradation of the articular cartilage, which in turn causes restricted joint mobility and pain. The lubricating and shock-absorbing properties of this product contribute to pain relief and improved joint mobility. After a treatment cycle of three to five intra-articular injections, this effect can last for several months.5. Contraindications and Possible InteractionsThe product must not be used in patients with known hypersensitivity to any of the ingredients. Since this product is injected intra-articularly, patients with bacterial arthritis should be excluded from treatment to avoid possible complications. Currently, there is no information on undesirable interactions with other intra-articularly administered therapies.6. Side Effects and Adverse EventsLocal symptoms in the treated joint (pain, warmth, redness, and swelling) may occur after administration. With comparable products, the following adverse events have been reported: mild to moderate joint pain, rarely rash, aseptic joint effusions, pruritus, and muscle cramps. In very rare cases, the following adverse events have also been observed: allergic reactions, anaphylactic shock, hemarthrosis, phlebitis, pseudosepsis, severe acute inflammatory reactions (SAIR), nasopharyngitis, joint stiffness, tendinitis, bursitis, fever, and myalgia.7. WarningsThe product should only be administered by physicians trained in intra-articular injections. They should also be familiar with all immunological and other risks associated with the use of biological materials. The product has not been studied in pregnant women or in children\/adolescents under 18 years of age. Keep the product out of sight and reach of children. The product is for single use only; the syringe must not be resterilized after u...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synocrom-bausch-lomb-gmbh-surgical-gelenkspritzen-stakonmed-309145.jpg?v=1772216007\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synocrom-bausch-lomb-gmbh-surgical-gelenkspritzen-stakonmed-634282.jpg?v=1772216007\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/synocrom-bausch-lomb-gmbh-surgical-gelenkspritzen-stakonmed-227053.jpg?v=1772216007\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/synocrom-1-x-2-ml?variant=47355881095508\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":45.0,"price":19.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Croma-Pharma GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674399039828","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"3820100"}
{"item_group_id":11997490577748,"aid":51849555050836,"name":"Synolis VA 40\/80 1x 2.0 ml","brand":"Aptissen GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synolis","tags":"Aptissen GmbH,cat_Gelenkspritzen,cat_Synolis","mpnr":"143-1","desc":"Instructions for use SYNOLIS VADescriptionSYNOLIS VA is a viscoelastic, sterile, apyrogenic, isotonic, buffered 2% sodium hyaluronate solution. The sodium hyaluronate used in SYNOLIS VA is obtained by bacterial fermentation and has a high average molecular weight (MW) of 2 MDa. SYNOLIS VA has a neutral pH of 6.8–7.4, similar to synovial fluid.A high concentration and high molecular weight of sodium hyaluronate combined with a polyol (sorbitol), which limits degradation, give this viscoelastic solution the ability to restore joint lubrication and shock absorption properties similar to those of healthy synovial fluid. SYNOLIS VA works by restoring the physiological and viscoelastic properties of synovial fluid, which are progressively lost during the development of osteoarthritis (OA). SYNOLIS VA thus relieves local pain and discomfort caused by symptomatic OA and improves the mobility of synovial joints.IntroductionSYNOLIS VA is available in two package sizes. Each box contains 1 syringe, traceability labels, and instructions for use. Each product includes an implant card for the patient to be completed by the physician.            SYNOLIS VA 40\/80      SYNOLIS VA 80\/160              Prefilled glass syringe with 2 ml viscous pain-relieving gel.      Prefilled glass syringe with 4 ml viscous pain-relieving gel.      CompositionPer 1 ml:            Sodium Hyaluronate      20 mg              Sorbitol      40 mg              Buffered saline q.s.p.      1 ml      Sterilization method: Moist heat.IndicationsSYNOLIS VA is indicated for the treatment of symptomatic osteoarthritis (OA) to relieve pain and improve mobility after degenerative changes in synovial joints:            SYNOLIS VA 40\/80      SYNOLIS VA 80\/160              Knee joint      Knee and hip joint      This treatment is intended for patients who have not responded to conservative, non-pharmacological therapy and simple analgesics and\/or NSAIDs, or who have intolerance to simple analgesics and\/or NSAIDs.Dosage, type, and duration of useTreatment must be adjusted according to the patient's radiological and physical condition (Kellgren-Lawrence score, pain, and mobility). Existing clinical data have demonstrated efficacy for different injection schedules depending on the severity of osteoarthritis:            Injection schedule \/ Severity of the disease      Mild to moderate      Moderate to severe              1 injection of SYNOLIS VA 40\/80      ✓                    1 injection of SYNOLIS VA 80\/160      ✓      ✓              3 injections of SYNOLIS VA 40\/80 at intervals of 1 week each            ✓      An additional injection of SYNOLIS VA can be given if OA symptoms reoccur or to maintain local pain treatment and joint function. However, in patients who respond to the treatment, the benefit is expected to last at least six months.The interval before repeating the treatment regimen also depends on the physician's experience and\/or the severity of the disease.SYNOLIS VA should be injected into the synovial cavity by a physician trained in intra-articular (i.a.) injections. Several measures must be taken before injecting SYNOLIS VA:  SYNOLIS VA should be at room temperature at the time of intra-articular injection.  The injection site must be carefully disinfected.  The physician is responsible for selecting an appropriate needle size (recommended size for knee joint injections: 18 to 21 G).  The needle must be firmly attached to the Luer-lock connection of the syringe.  Inject precisely only into the joint cavity.ContraindicationsSYNOLIS VA must not:  should not be injected into patients with known hypersensitivity or allergy to sodium hyaluronate and\/or sorbitol preparations;  should not be injected into patients with a skin disease or infection at the injection site;  should not be injected intravascularly;  should not be injected into pregnant or breastfeeding women;  should not be injected into adolescents under 18 years of age.Special precautions for use  Before ...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synolis-va-4080-1x-20-ml-aptissen-gmbh-gelenkspritzen-stakonmed-2877413.jpg?v=1772274020\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synolis-va-4080-1x-20-ml-aptissen-gmbh-gelenkspritzen-stakonmed-8201631.jpg?v=1772274020\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/synolis-va-4080-1x-20-ml-aptissen-gmbh-gelenkspritzen-stakonmed-9908450.jpg?v=1772274020\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/synolis-va-40-80?variant=51849555050836\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":209.0,"price":83.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Aptissen GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 40 mg \/ 2 ml und 80 mg Sorbitol","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57235295797588","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"16958314"}
{"item_group_id":11997497950548,"aid":51849577333076,"name":"Synolis VA 80\/160 1x 4.0 ml","brand":"Aptissen GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synolis","tags":"Aptissen GmbH,cat_Gelenkspritzen,cat_Synolis","mpnr":"143-2","desc":"Instructions for use SYNOLIS VADescriptionSYNOLIS VA is a viscoelastic, sterile, apyrogenic, isotonic, buffered 2% sodium hyaluronate solution. The sodium hyaluronate used in SYNOLIS VA is obtained by bacterial fermentation and has a high average molecular weight (MW) of 2 MDa. SYNOLIS VA has a neutral pH of 6.8–7.4, similar to synovial fluid.A high concentration and high molecular weight of sodium hyaluronate combined with a polyol (sorbitol), which limits degradation, give this viscoelastic solution the ability to restore joint lubrication and shock absorption properties similar to those of healthy synovial fluid. SYNOLIS VA works by restoring the physiological and viscoelastic properties of synovial fluid, which are progressively lost during the development of osteoarthritis (OA). SYNOLIS VA thus relieves local pain and discomfort caused by symptomatic OA and improves the mobility of synovial joints.IntroductionSYNOLIS VA is available in two package sizes. Each box contains 1 syringe, traceability labels, and instructions for use. Each product includes an implant card for the patient to be completed by the physician.            SYNOLIS VA 40\/80      SYNOLIS VA 80\/160              pre-filled glass syringe with 2 ml viscous pain-relieving gel.      pre-filled glass syringe with 4 ml viscous pain-relieving gel.      CompositionPer 1 ml:            Sodium Hyaluronate      20 mg              Sorbitol      40 mg              Buffered saline q.s.p.      1 ml      Sterilization method: Moist heat.IndicationsSYNOLIS VA is indicated for the treatment of symptomatic osteoarthritis (OA) to relieve pain and improve mobility after degenerative changes in synovial joints:            SYNOLIS VA 40\/80      SYNOLIS VA 80\/160              Knee joint      Knee and hip joint      This treatment is intended for patients who have not responded to conservative, non-pharmacological therapy and simple analgesics and\/or NSAIDs, or who have intolerance to simple analgesics and\/or NSAIDs.Dosage, type, and duration of useTreatment must be adjusted according to the patient's radiological and physical condition (Kellgren-Lawrence score, pain, and mobility). Existing clinical data have demonstrated efficacy for different injection schedules depending on the severity of osteoarthritis:            Injection schedule \/ Severity of the disease      Severe mild to moderate      Severe moderate to severe              1 injection of SYNOLIS VA 40\/80      ✓                    1 injection of SYNOLIS VA 80\/160      ✓      ✓              3 injections of SYNOLIS VA 40\/80 at intervals of 1 week each            ✓      An additional injection of SYNOLIS VA can be given if OA symptoms reoccur or to maintain local pain treatment and joint function. However, in patients who respond to the treatment, the benefit is expected to last at least six months.The interval before repeating the treatment regimen also depends on the physician's experience and\/or the severity of the disease.SYNOLIS VA should be injected into the synovial cavity by a physician trained in intra-articular (i.a.) injections. Several measures must be taken before injecting SYNOLIS VA:  SYNOLIS VA should be at room temperature at the time of intra-articular injection.  The injection site must be carefully disinfected.  The physician is responsible for selecting an appropriate needle size (recommended size for knee joint injections: 18 to 21 G).  The needle must be firmly attached to the Luer-Lock connection of the syringe.  Inject precisely only into the joint cavity.ContraindicationsSYNOLIS VA must not:  should not be injected into patients with known hypersensitivity or allergy to sodium hyaluronate and\/or sorbitol preparations;  should not be injected into patients with a skin disease or infection at the injection site;  should not be injected intravascularly;  should not be injected into pregnant or breastfeeding women;  should not be injected into adolescents under 18 years of age.Special precautions ...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synolis-va-80160-1x-40-ml-aptissen-gmbh-gelenkspritzen-stakonmed-7125871.jpg?v=1772274014\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synolis-va-80160-1x-40-ml-aptissen-gmbh-gelenkspritzen-stakonmed-9056305.jpg?v=1772274016\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/synolis-va-80160-1x-40-ml-aptissen-gmbh-gelenkspritzen-stakonmed-6419362.jpg?v=1772274015\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/synolis-va-80-160?variant=51849577333076\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":329.0,"price":159.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Aptissen GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 80 mg \/ 4 ml und 160 mg Sorbitol","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/57235295797588","meta_packungsgr_e":"1 Fertigspritze a 4 ml","meta_pzn":"16958320"}
{"item_group_id":8748729794900,"aid":47355873591636,"name":"Synvisc Classic 3x 2.0 ml","brand":"Sanofi-Aventis GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synvisc","tags":"08531872,cat_Gelenkspritzen,cat_Synvisc,Sanofi-Aventis Deutschland GmbH","mpnr":"145","desc":"Description for Synvisc ClassicHylan G-F 20 is available as• Synvisc , 2-ml pack.• Synvisc-One®, 6-ml pack.Hylan G-F 20 is a sterile, pyrogen-free, elastoviscous fluid containing Hylan A and Hylan B polymers derived from a highly purified avian extract. Hylans are derivatives of hyaluronan (sodium salt of hyaluronic acid) and consist of repeating disaccharide units of N-acetylglucosamine and sodium glucuronate. The average molecular weight of Hylan A is approximately 6,000,000 Daltons, and Hylan B is a hydrated gel. Hylan G-F 20 contains Hylan A and Hylan B (8.0 mg ± 2.0 mg per ml) in a buffered physiological sodium chloride solution (pH 7.2 ± 0.3).PROPERTIESHylan G-F 20 is biologically similar to hyaluronan. Hyaluronan is a component of synovial fluid and is responsible for its viscoelasticity. However, the mechanical (elasto-viscous) properties of Hylan G-F 20 exceed those of synovial fluid and hyaluronan solutions of comparable concentration. At a frequency of 2.5 Hertz, Hylan G-F 20 has an elasticity (G’: shock absorption factor) of 111 ± 13 Pascal (Pa) and a viscosity (G’’: shock dissipation factor) of 25 ± 2 Pa. At a frequency of 2.5 Hertz, the elasticity and viscosity of knee synovial fluid measured by a comparable method in 18- to 27-year-olds were G’ = 117 ± 13 Pa and G’’ = 45 ± 8 Pa. Hylans are broken down in the body in the same way as hyaluronan; the breakdown products are non-toxic.INDICATIONSHylan G-F 20• serves as a temporary replacement or supplement to synovial fluid. • is indicated for patients at all stages of joint disease.• shows the most effective results in patients who actively and regularly move the affected joints. move regularly.• The therapeutic effect of Hylan G-F 20 is based on viscosupplementation, a process in which the physiological and rheological conditions of the arthritic joint tissue to be restored.Viscosupplementation with Hylan G-F 20 is a therapy to relieve pain and physical discomfort, enabling improved joint mobility. In vitro-Studies have shown that Hylan G-F 20 protects cartilage cells from certain physical and chemical damage.Synvisc is intended only for intra-articular use by the physician to treat pain associated with degenerative joint disease of the knee, hip, ankle, or shoulder.Synvisc-One is intended only for intra-articular use by a physician to treat pain associated with degenerative joint disease of the knee.CONTRAINDICATIONS• If venous or lymphatic congestion occurs in the affected limb, Hylan G-F 20 should not be injected into the joint.• Hylan G-F 20 must not be used in infected or severely inflamed joints or in patients with skin diseases or infections in the injection area. • Hylan G-F-20 must not be used in patients with known hypersensitivity (allergy) used against hyaluronan (sodium hyaluronate).WARNINGS• Do not inject intravascularly.• Do not inject extra-articularly and not into the synovial tissue or capsule. Side effects at the injection site may especially occur if the Injection of Synvisc not strictly intra-articular.• Disinfectants containing quaternary ammonium salts can cause precipitation favor hyaluronan. Therefore, they should not be used simultaneously, for example, to prepare the skin for the procedure.PRECAUTIONS• If there is a large intra-articular effusion before injection, Hylan G-F 20 should not be used.• As with any invasive procedure in the joint, patients are advised to avoid strenuous activities for a few days after the injection.• Hylan G-F 20 has not been tested in pregnant women and children under 18 years of age.• Hylan G-F 20 contains small amounts of bird protein and should be used with caution in patients who should not be used in patients who react hypersensitively to this.SIDE EFFECTS• Side effects affecting the joint injected: After injection of Hylan G-F 20 into the joint, temporary pain and\/or swelling and\/or effusions in the injection area may occur. Cases of acute inflammation characterized by joint pain, swelling, effusion, ...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-classic-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-109547.jpg?v=1772216066\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-classic-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-843430.jpg?v=1772216066\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-classic-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-934546.jpg?v=1772216066\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/synvisc-classic-3-x-2-ml?variant=47355873591636\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":307.66,"price":174.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Sanofi-Aventis Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 16 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674217931092","meta_packungsgr_e":"3 Fertigspritzen a 2 ml","meta_pzn":"08531872"}
{"item_group_id":8748729696596,"aid":47355873526100,"name":"Synvisc Mono 1x 2.0 ml","brand":"Sanofi-Aventis GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synvisc","tags":"04184356,cat_Gelenkspritzen,cat_Synvisc,Sanofi-Aventis Deutschland GmbH","mpnr":"144","desc":"Description for Synvisc MonoHylan G-F 20 is available as• Synvisc , 2-ml pack.• Synvisc-One®, 6-ml pack.Hylan G-F 20 is a sterile, pyrogen-free, elastoviscous fluid containing Hylan A and Hylan B polymers derived from a highly purified avian extract. Hylans are derivatives of hyaluronan (sodium salt of hyaluronic acid) and consist of repeating disaccharide units of N-acetylglucosamine and sodium glucuronate. The average molecular weight of Hylan A is approximately 6,000,000 Daltons, and Hylan B is a hydrated gel. Hylan G-F 20 contains Hylan A and Hylan B (8.0 mg ± 2.0 mg per ml) in a buffered physiological sodium chloride solution (pH 7.2 ± 0.3).PROPERTIESHylan G-F 20 is biologically similar to hyaluronan. Hyaluronan is a component of synovial fluid and is responsible for its viscoelasticity. However, the mechanical (elasto-viscous) properties of Hylan G-F 20 exceed those of synovial fluid and hyaluronan solutions of comparable concentration. At a frequency of 2.5 Hertz, Hylan G-F 20 has an elasticity (G’: shock absorption factor) of 111 ± 13 Pascal (Pa) and a viscosity (G’’: shock dissipation factor) of 25 ± 2 Pa. At a frequency of 2.5 Hertz, the elasticity and viscosity of knee synovial fluid measured by a comparable method in 18- to 27-year-olds were G’ = 117 ± 13 Pa and G’’ = 45 ± 8 Pa. Hylans are broken down in the body in the same way as hyaluronan; the breakdown products are non-toxic.INDICATIONSHylan G-F 20• serves as a temporary replacement or supplement to synovial fluid. • is indicated for patients at all stages of joint disease.• shows the most effective results in patients who actively and regularly move the affected joints. move regularly.• The therapeutic effect of Hylan G-F 20 is based on viscosupplementation, a process in which the physiological and rheological conditions of the arthritic joint tissue to be restored.Viscosupplementation with Hylan G-F 20 is a therapy to relieve pain and physical discomfort, enabling improved joint mobility. In vitro-Studies have shown that Hylan G-F 20 protects cartilage cells from certain physical and chemical damage.Synvisc is intended only for intra-articular use by the physician to treat pain associated with degenerative joint disease of the knee, hip, ankle, or shoulder.Synvisc-One is intended only for intra-articular use by a physician to treat pain associated with degenerative joint disease of the knee.CONTRAINDICATIONS• If venous or lymphatic congestion occurs in the affected limb, Hylan G-F 20 should not be injected into the joint.• Hylan G-F 20 must not be used in infected or severely inflamed joints or in patients with skin diseases or infections at the injection site. • Hylan G-F-20 must not be used in patients with known hypersensitivity (allergy) used against hyaluronan (sodium hyaluronate).WARNINGS• Do not inject intravascularly.• Do not inject extra-articularly and not into the synovial tissue or capsule. Side effects at the injection site may especially occur if the Injection of Synvisc not strictly intra-articular.• Disinfectants containing quaternary ammonium salts can cause precipitation promote hyaluronan. Therefore, they should not be used simultaneously, for example, to prepare the skin for the procedure.PRECAUTIONS• If there is a large intra-articular effusion before injection, Hylan G-F 20 should not be used.• As with any invasive procedure in the joint, patients are advised to avoid strenuous activities for a few days after the injection.• Hylan G-F 20 has not been tested in pregnant women and children under 18 years of age.• Hylan G-F 20 contains small amounts of bird protein and should be avoided in patients who should not be used in patients who react hypersensitively to this.SIDE EFFECTS• Side effects affecting the injected joint: After injection of Hylan G-F 20 into the joint, temporary pain and\/or swelling and\/or effusions may occur at the injection site. Cases of acute inflammation characterized by joint pain, swelling, effusion, and occasio...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-mono-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-847719.jpg?v=1772216091\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-mono-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-393802.jpg?v=1772216091\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-mono-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-620748.jpg?v=1772216091\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/synvisc-mono-1-x-2-ml?variant=47355873526100\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":111.21,"price":64.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"Sanofi-Aventis Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 16 mg \/ 2 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674217931092","meta_packungsgr_e":"1 Fertigspritze a 2 ml","meta_pzn":"04184356"}
{"item_group_id":8748729860436,"aid":47355873657172,"name":"Synvisc One 1x 6.0 ml","brand":"Sanofi-Aventis GmbH","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Synvisc","tags":"03390734,cat_Gelenkspritzen,cat_Synvisc,Sanofi-Aventis Deutschland GmbH","mpnr":"146","desc":"Description for Synvisc OneHylan G-F 20 is available as• Synvisc , 2-ml pack.• Synvisc-One®, 6-ml pack.Hylan G-F 20 is a sterile, pyrogen-free, elastoviscous fluid containing Hylan A and Hylan B polymers derived from a highly purified avian extract. Hylans are derivatives of hyaluronan (sodium salt of hyaluronic acid) and consist of repeating disaccharide units of N-acetylglucosamine and sodium glucuronate. The average molecular weight of Hylan A is approximately 6,000,000 Daltons, and Hylan B is a hydrated gel. Hylan G-F 20 contains Hylan A and Hylan B (8.0 mg ± 2.0 mg per ml) in a buffered physiological sodium chloride solution (pH 7.2 ± 0.3).PROPERTIESHylan G-F 20 is biologically similar to hyaluronan. Hyaluronan is a component of synovial fluid and is responsible for its viscoelasticity. However, the mechanical (elasto-viscous) properties of Hylan G-F 20 exceed those of synovial fluid and hyaluronan solutions of comparable concentration. At a frequency of 2.5 Hertz, Hylan G-F 20 has an elasticity (G’: shock absorption factor) of 111 ± 13 Pascal (Pa) and a viscosity (G’’: shock dissipation factor) of 25 ± 2 Pa. At a frequency of 2.5 Hertz, the elasticity and viscosity of knee synovial fluid measured by a comparable method in 18- to 27-year-olds were G’ = 117 ± 13 Pa and G’’ = 45 ± 8 Pa. Hylans are broken down in the body in the same way as hyaluronan; the breakdown products are non-toxic.INDICATIONSHylan G-F 20• serves as a temporary replacement or supplement to synovial fluid. • is indicated for patients at all stages of joint disease.• shows the most effective results in patients who actively and regularly move the affected joints. move regularly.• The therapeutic effect of Hylan G-F 20 is based on viscosupplementation, a process in which the physiological and rheological conditions of the arthritic joint tissue to be restored.Viscosupplementation with Hylan G-F 20 is a therapy to relieve pain and physical discomfort, enabling improved joint mobility. In vitro-Studies have shown that Hylan G-F 20 protects cartilage cells from certain physical and chemical damage.Synvisc is intended only for intra-articular use by the physician to treat pain associated with degenerative joint disease of the knee, hip, ankle, or shoulder.Synvisc-One is intended only for intra-articular use by a physician to treat pain associated with degenerative joint disease of the knee.CONTRAINDICATIONS• If venous or lymphatic congestion occurs in the affected limb, Hylan G-F 20 should not be injected into the joint.• Hylan G-F 20 must not be used in infected or severely inflamed joints or in patients with skin diseases or infections in the injection area. • Hylan G-F-20 must not be used in patients with known hypersensitivity (allergy) used against hyaluronan (sodium hyaluronate).WARNINGS• Do not inject intravascularly.• Do not inject extra-articularly and not into the synovial tissue or capsule. Side effects at the injection site may especially occur if the Injection of Synvisc not strictly intra-articular.• Disinfectants containing quaternary ammonium salts can cause flocculation favor hyaluronan. Therefore, they should not be used simultaneously, for example, to prepare the skin for the procedure.PRECAUTIONS• If there is a large intra-articular effusion before injection, Hylan G-F 20 should not be used.• As with any invasive procedure in the joint, patients are advised to avoid strenuous activities for a few days after the injection.• Hylan G-F 20 has not been tested in pregnant women and children under 18 years of age.• Hylan G-F 20 contains small amounts of bird protein and should be avoided in patients who should not be used in patients who react hypersensitively to this.SIDE EFFECTS• Side effects affecting the joint injected: After injection of Hylan G-F 20 into the joint, temporary pain and\/or swelling and\/or effusions in the injection area may occur. Cases of acute inflammation characterized by joint pain, swelling, effusion, and occasionall...","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-one-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-927488.jpg?v=1772216110\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-one-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-602388.jpg?v=1772216110\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/synvisc-one-sanofi-aventis-deutschland-gmbh-gelenkspritzen-stakonmed-801659.jpg?v=1772216110\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/synvisc-one-1-x-6-ml?variant=47355873657172\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":359.07,"price":189.95,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"Sanofi-Aventis Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 48 mg \/ 6 ml","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674217931092","meta_packungsgr_e":"1 Fertigspritze a 6 ml","meta_pzn":"03390734"}
{"item_group_id":8748737888596,"aid":47355901935956,"name":"Teosyal PureSense Kiss 2x 1.0 ml","brand":"TEOXANE Deutschland GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Teosyal","tags":"cat_Filler,cat_Teosyal","mpnr":"268","desc":"TEOSYAL® PureSense Kiss LidocaineTEOSYAL® PureSense Kiss Lidocaine is an injectable hyaluronic acid dermal filler specifically designed for treating sensitive lips. The product is suitable for precise lip contouring as well as targeted volume enhancement.Additionally, TEOSYAL® PureSense Kiss Lidocaine can be used to smooth mouth corner wrinkles, marionette lines, and mentolabial folds. The moisturizing effect of hyaluronic acid improves lip texture and supports a natural, harmonious appearance. The addition of the local anesthetic lidocaine allows for a comfortable and largely painless injection.Treatment AreasLipsMarionette linesMentolabial foldsMouth corner areaProduct FeaturesSpecifically suitable for sensitive lip tissuePrecise lip contouring and subtle volume supportMonophasic, homogeneous hyaluronic acid gel with high cross-linking for long-lasting resultsIntensive hydration to improve lip quality100% resorbable and non-animal originErgonomic glass syringes with highly precise graduation and 360° rotatable tip for maximum injection controlComfortable, largely painless application thanks to included lidocaineGPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Teoxane SAAddress: Les Charmilles – Rue de Lyon 105, Geneva, SwitzerlandE-Mail: info@teoxane.comWebsite: https:\/\/www.teoxane.comEuropean manufacturer: NoResponsible PersonName: Emergo EuropeAddress: Prinsessegracht 20, 2514 AP, The Hague, The NetherlandsWebsite: https:\/\/www.emergobyul.comImporter InformationName: Emergo EuropeAddress: Westervoortsedijk 60, 6827 AT Arnhem, The NetherlandsE-Mail: emergoVigilance@ul.comWebsite: https:\/\/www.emergobyul.com\/","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-kiss-ps-lidocaine-teoxane-deutschland-gmbh-filler-stakonmed-428476.jpg?v=1771098213\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-kiss-ps-lidocaine-teoxane-deutschland-gmbh-filler-stakonmed-884364.jpg?v=1771098213\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-kiss-ps-lidocaine-teoxane-deutschland-gmbh-filler-stakonmed-284679.jpg?v=1771097831\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/teosyal-kiss-ps-lidocaine-2-x-1-0-ml?variant=47355901935956\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":312.97,"price":149.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"TEOXANE Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":8748737954132,"aid":47355902034260,"name":"Teosyal PureSense Redensity 2 2x 1.0 ml","brand":"TEOXANE Deutschland GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Teosyal","tags":"cat_Filler,cat_Teosyal,TEOXANE Deutschland GmbH","mpnr":"270","desc":"TEOSYAL® PureSense Redensity 2 LidocaineTEOSYAL® PureSense Redensity 2 Lidocaine is an injectable hyaluronic acid dermal filler designed for targeted treatment of the sensitive eye area. The product is especially suitable for correcting dark circles and eye bags as well as improving skin quality in the periorbital region.The special formulation combines cross-linked and non-cross-linked hyaluronic acid with a Dermal Redensity Complex of eight amino acids, supporting intense hydration and visible skin smoothing. The addition of the local anesthetic lidocaine allows for a comfortable and largely painless injection.Treatment AreasEye areaDark circlesEye bags \/ Tear troughNote: Not suitable for treating pigmented dark circles or pronounced malar bags.Product FeaturesCombination of cross-linked and non-cross-linked hyaluronic acid for targeted treatment of the tear troughDermal Redensity Complex with 8 amino acids to improve skin qualityIntense hydration of the delicate periorbital skinMonophasic, homogeneous hyaluronic acid gel100% resorbable and non-animal originErgonomic glass syringes with high-precision graduation and 360° rotatable tip for maximum injection controlComfortable, largely painless application thanks to included lidocaineOnset and DurationResults usually visible immediately after treatmentDuration varies by patient, approximately 9–12 monthsGPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Teoxane SAAddress: Les Charmilles – Rue de Lyon 105, Geneva, SwitzerlandEmail: info@teoxane.comWebsite: https:\/\/www.teoxane.comEuropean manufacturer: NoResponsible PersonName: Emergo EuropeAddress: Prinsessegracht 20, 2514 AP, The Hague, The NetherlandsWebsite: https:\/\/www.emergobyul.comImporter InformationName: Emergo EuropeAddress: Westervoortsedijk 60, 6827 AT Arnhem, The NetherlandsEmail: emergoVigilance@ul.comWebsite: https:\/\/www.emergobyul.com\/","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-puresense-redensity-2-2x-10-ml-teoxane-deutschland-gmbh-filler-stakonmed-3478958.jpg?v=1771113971\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-puresense-redensity-2-2x-10-ml-teoxane-deutschland-gmbh-filler-stakonmed-4841790.jpg?v=1771113973\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-puresense-redensity-2-2x-10-ml-teoxane-deutschland-gmbh-filler-stakonmed-6042674.jpg?v=1771113973\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/teosyal-redensity-2-ps-lidocaine-2-x-1-0-ml?variant=47355902034260\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":240.0,"price":149.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"TEOXANE Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":11997587079508,"aid":51849796387156,"name":"Teosyal RHA 2 2x 1.0 ml","brand":"TEOXANE Deutschland GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Teosyal","tags":"cat_Filler,cat_Teosyal,TEOXANE Deutschland GmbH","mpnr":"272","desc":"TEOSYAL® RHA 2TEOSYAL® RHA 2 is an injectable hyaluronic acid dermal filler for correcting mild to moderate wrinkles and improving skin elasticity and hydration. The product is especially suitable for dynamic facial areas as it supports natural skin movement and maintains a fresh, vital appearance.Additionally, TEOSYAL® RHA 2 can be used for lip treatment. The special RHA® technology (Resilient Hyaluronic Acid) allows high gel flexibility with stable tissue integration.Treatment areasEye areaGlabellar linesCrow's feetLipsMarionette linesMentolabial foldsCorners of the mouthNasolabial foldsForehead areaProduct featuresSuitable for mild to moderate dynamic wrinkles in facial expression areasBased on RHA® technology to support natural skin movementsHigh cross-linking degree for stable, long-lasting results with high elasticityMonophasic and homogeneous hyaluronic acid gelIntensive hydration to improve skin quality100% resorbable and non-animal originErgonomic glass syringes with highly precise graduation and 360° rotatable tip for maximum injection controlGPSR informationGeneral informationCE marking: YesManufacturer informationName: Teoxane SAAddress: Les Charmilles – Rue de Lyon 105, Geneva, SwitzerlandE-Mail: info@teoxane.comWebsite: https:\/\/www.teoxane.comEuropean Manufacturer: NoResponsible PersonName: Emergo EuropeAddress: Prinsessegracht 20, 2514 AP, The Hague, The NetherlandsWebsite: https:\/\/www.emergobyul.comImporter InformationName: Emergo EuropeAddress: Westervoortsedijk 60, 6827 AT Arnhem, The NetherlandsEmail: emergoVigilance@ul.comWebsite: https:\/\/www.emergobyul.com\/","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-2-2x-10-ml-teoxane-deutschland-gmbh-filler-stakonmed-2795819.jpg?v=1771113972\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-2-2x-10-ml-teoxane-deutschland-gmbh-filler-stakonmed-1089033.jpg?v=1771113972\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-2-2x-10-ml-teoxane-deutschland-gmbh-filler-stakonmed-4034847.jpg?v=1771113973\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/teosyal-rha-2?variant=51849796387156\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":297.5,"price":149.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"TEOXANE Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":8748738052436,"aid":47355902230868,"name":"Teosyal RHA 3 2x 1.0 ml","brand":"TEOXANE Deutschland GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Teosyal","tags":"cat_Filler,cat_Teosyal,TEOXANE Deutschland GmbH","mpnr":"273","desc":"TEOSYAL® RHA 3 LidocaineTEOSYAL® RHA 3 Lidocaine is an injectable hyaluronic acid dermal filler for correcting medium to deep wrinkles and targeted volume support in the facial area. The product is especially suitable for smoothing pronounced nasolabial folds, frown lines, and crow's feet. Additionally, TEOSYAL® RHA 3 Lidocaine can be used for volume enhancement in the cheek area and lip treatment.The special RHA® technology (Resilient Hyaluronic Acid) supports the natural movement of the skin in expression-active areas, contributing to a fresh, elastic, and natural appearance. The addition of the local anesthetic lidocaine allows for a pleasant and largely painless injection.Treatment areasGlabellar linesWrinkle foldsCrow's feetMouth corner areaNasolabial foldsForehead areaCheek areaProduct featuresSuitable for medium to deep wrinkles as well as volume enhancement in the cheek areaBased on RHA® technology to preserve natural skin movementsHigh cross-linking degree for stable and long-lasting resultsMonophasic and homogeneous hyaluronic acid gelIntensive hydration and improvement of skin elasticity100% resorbable and non-animal originErgonomic glass syringes with highly precise graduation and 360° rotatable tip for maximum injection controlComfortable, largely painless application thanks to included lidocaineOnset and duration of effectResults usually visible immediately after treatmentAverage duration of effect approx. 9 months (depending on area, skin type, and individual factors)GPSR informationGeneral informationCE marking: YesManufacturer informationName: Teoxane SAAddress: Les Charmilles – Rue de Lyon 105, Geneva, SwitzerlandEmail: info@teoxane.comWebsite: https:\/\/www.teoxane.comEuropean Manufacturer: NoResponsible PersonName: Emergo EuropeAddress: Prinsessegracht 20, 2514 AP, The Hague, The NetherlandsWebsite: https:\/\/www.emergobyul.comImporter InformationName: Emergo EuropeAddress: Westervoortsedijk 60, 6827 AT Arnhem, The NetherlandsEmail: emergoVigilance@ul.comWebsite: https:\/\/www.emergobyul.com\/","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-3-teoxane-deutschland-gmbh-filler-stakonmed-606215.jpg?v=1770408717\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-3-teoxane-deutschland-gmbh-filler-stakonmed-468167.jpg?v=1771097830\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-3-teoxane-deutschland-gmbh-filler-stakonmed-320151.jpg?v=1771097830\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/teosyal-rha-3-2-x-1-0-ml?variant=47355902230868\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":321.3,"price":159.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"TEOXANE Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_packungsgr_e":"2 Fertigspritzen a 1 ml"}
{"item_group_id":11997591044436,"aid":51849801335124,"name":"Teosyal RHA Kiss 2x 0.7 ml","brand":"TEOXANE Deutschland GmbH","product_type":"Filler","shop_cat":"Bestseller Filler \u003e Dermafiller \u003e Teosyal","tags":"cat_Filler,cat_Teosyal,TEOXANE Deutschland GmbH","mpnr":"275","desc":"TEOSYAL® RHA Kiss LidocaineTEOSYAL® RHA Kiss Lidocaine is an injectable hyaluronic acid dermal filler designed for targeted treatment of the lips and lip contour. The product is suitable for correcting both fine and already deepened perioral wrinkles while also supporting the enhancement of lip volume.The highly concentrated hyaluronic acid provides intense hydration and increases the plumpness of the lips. At the same time, the special RHA technology allows for natural lip mobility, preserving facial expressions and the dynamics of the mouth area. The addition of the local anesthetic lidocaine ensures a comfortable and largely painless injection.Treatment AreasLipsCorners of the mouthProduct FeaturesPrecise lip and contour correction while maintaining natural mobilitySuitable for volume enhancement and treatment of perioral wrinklesBased on RHA® technology (Resilient Hyaluronic Acid) for dynamic areas100% resorbable and non-animal originErgonomic glass syringes with highly precise graduation and 360° rotatable tip for maximum injection controlComfortable, largely painless application thanks to included lidocaineGPSR InformationGeneral InformationCE marking: YesManufacturer InformationName: Teoxane SAAddress: Les Charmilles – Rue de Lyon 105, Geneva, SwitzerlandE-Mail: info@teoxane.comWebsite: https:\/\/www.teoxane.comEuropean manufacturer: NoResponsible PersonName: Emergo EuropeAddress: Prinsessegracht 20, 2514 AP, The Hague, The NetherlandsWebsite: https:\/\/www.emergobyul.comImporter InformationName: Emergo EuropeAddress: Westervoortsedijk 60, 6827 AT Arnhem, The NetherlandsE-Mail: emergoVigilance@ul.comWebsite: https:\/\/www.emergobyul.com\/","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-kiss-2x-07-ml-teoxane-deutschland-gmbh-filler-stakonmed-6762675.jpg?v=1771113973\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-kiss-2x-07-ml-teoxane-deutschland-gmbh-filler-stakonmed-5213286.jpg?v=1772216176\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/teosyal-rha-kiss-2x-07-ml-teoxane-deutschland-gmbh-filler-stakonmed-6146611.jpg?v=1772216176\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/teosyal-rha-kiss?variant=51849801335124\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":184.9,"price":123.5,"stock_quantity":42,"dlv_cost":0,"dlv_time":"Morgen","meta_anbieter_hersteller":"TEOXANE Deutschland GmbH","meta_darreichungsform":"Spritzampullen","meta_detail":"Hyalurosäure Fertigspritze mit 20 mg \/ 2 ml","meta_packungsgr_e":"2 Fertigspritzen a 0,7 ml"}
{"item_group_id":8748731892052,"aid":47355880505684,"name":"Viscoseal Syringe 1x 10.0 ml","brand":"TRB Chemedica AG","product_type":"Joint injections","shop_cat":"Bestselling Joint Injections \u003e Joint injections \u003e Viscoseal","tags":"09439387,cat_Gelenkspritzen,cat_Viscoseal,TRB Chemedica AG","mpnr":"147","desc":"INFORMATION FOR USE VISCOSEAL® SYRINGESodium hyaluronate from fermentation 0.5%. For substitution of joint lubricant. Pre-filled syringe with 10 ml solution (in sterile packaging) for single use. Sterile by moist heat.Composition:1 ml isotonic solution contains 5.0 mg sodium hyaluronate from fermentation as well as sodium chloride, disodium hydrogen phosphate, sodium dihydrogen phosphate, and water for injection purposes.Indications:For pain relief, improved joint mobility, and faster restoration of joint function after arthroscopy or joint lavage in the shoulder or knee joint by removing the rinse fluid and substituting the joint lubricant.Contraindications:Known hypersensitivity to any of the ingredients.Interactions:Do not bring VISCOSEAL® SYRINGE into contact with objects disinfected with solutions of quaternary ammonium salts.Side effects:No adverse effects are expected when VISCOSEAL® SYRINGE is used according to the indication and prescribed dosage guidelines. There have been no reports of infections or allergic reactions causally related to the use of VISCOSEAL® SYRINGE so far. However, both risks cannot be completely excluded. Contraindications must be observed.Dosage instructions and method of application:As long as the sterile packaging is unopened, the contents and surface of the pre-filled syringe are sterile. VISCOSEAL® SYRINGE should be used after completion of arthroscopy and normal joint lavage. Remove the pre-filled syringe from the sterile packaging and remove the cap. Attach a suitable cannula and lock it with a slight twist, or connect the pre-filled syringe to an access already in the joint. Before use, any air bubble present in the pre-filled syringe should be removed. Inject VISCOSEAL® SYRINGE into the joint space. This promotes the removal of remaining rinse fluid.Precautions:Observe general precautions for arthroscopic procedures. VISCOSEAL® SYRINGE should be correctly instilled into the joint space. Since there is insufficient experience with the use of sodium hyaluronate in children as well as in pregnant and breastfeeding women, the use of VISCOSEAL® SYRINGE is not recommended in these cases. Any solution not used immediately after opening must be discarded. Otherwise, sterility is no longer guaranteed, which can lead to an infection risk. Do not use if the pre-filled syringe or sterile packaging is damaged. Store between 2 °C and 25 °C! Observe expiration date. Keep out of reach of children!Properties and mode of action:Arthroscopy is a common procedure for visualization, diagnosis, and treatment of joint problems. To create clear visibility and to remove cartilage debris, the joint is rinsed during arthroscopy with solutions such as physiological saline or Ringer's lactate solution. There is evidence that the rinse fluid remaining in the joint can impair cartilage metabolism. Furthermore, during the procedure, the synovial fluid, which has special viscoelastic and protective properties due to its hyaluronic acid content, is rinsed out of the joint. Therefore, patients who experience long-term improvement in joint function through the procedure may have complaints such as pain, swelling, and impaired joint mobility immediately after the procedure. VISCOSEAL® SYRINGE was developed to relieve such complaints and to enable faster recovery of joint function. VISCOSEAL® SYRINGE contains a highly pure specific fraction of hyaluronic acid produced by a fermentation process and contains no animal proteins. Instillation of VISCOSEAL® SYRINGE into the joint space helps remove remaining rinse fluid and efficiently coats all surfaces within the joint. The VISCOSEAL® SYRINGE remaining in the joint acts as a lubricant and shock absorber, and its network of macromolecules prevents free passage of inflammatory cells and molecules through the joint space.Package size:1 pre-filled syringe of 50 mg\/10 ml (in sterile packaging) for single use.For use by a physician only.Information status: 2019-10","image":"https:\/\/stakonmed.de\/cdn\/shop\/files\/viscoseal-syringe-trb-chemedica-ag-gelenkspritzen-stakonmed-610574.jpg?v=1772216199\u0026width=1000","images":"https:\/\/stakonmed.de\/cdn\/shop\/files\/viscoseal-syringe-trb-chemedica-ag-gelenkspritzen-stakonmed-829985.jpg?v=1772216205\u0026width=1000,https:\/\/stakonmed.de\/cdn\/shop\/files\/viscoseal-syringe-trb-chemedica-ag-gelenkspritzen-stakonmed-817082.jpg?v=1772216205\u0026width=1000","link":"https:\/\/stakonmed.de\/en\/products\/viscoseal-syringe-1-x-2-ml?variant=47355880505684\u0026utm_source=web\u0026utm_medium=cpc\u0026utm_campaign=billiger","availability":"in stock","old_price":86.73,"price":56.95,"stock_quantity":42,"dlv_cost":4.95,"dlv_time":"Morgen","meta_anbieter_hersteller":"TRB Chemedica AG","meta_darreichungsform":"Spritzampullen","meta_detail":"Natriumhyaluronat aus Fermentation 0,5 %. Fertigspritze mit 10 ml Lösung","meta_gebrauchsanweisung_pdf_download_":"gid:\/\/shopify\/GenericFile\/45674333929812","meta_packungsgr_e":"1 Fertigspritze a 10 ml","meta_pzn":"09439387"}